From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Hassard Subject: M-Audio Sonica support Date: Wed, 28 Aug 2002 07:33:07 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20020828143307.GB468@SHLIAN> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from lb1.angio.com ([207.23.249.14]) by alsa.alsa-project.org (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id QAA05802 for ; Wed, 28 Aug 2002 16:33:20 +0200 Received: from shlian.angio.com (shlian.angio.com [192.168.100.174]) by lb1.angio.com (Postfix) with SMTP id 91F1E73C83 for ; Wed, 28 Aug 2002 06:33:53 -0700 (PDT) Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Hi, I was trying to get my M-Audio Sonica to work under Alsa. It's a nifty little single channel out 24/96 USB audio device. Here's the product page: http://www.m-audio.com/products/consumer/sonica.php I'm running the CVS version of Alsa from within the last hour. snd-usb-audio modprobes fine and doesn't give me any errors. /dev/dsp doesn't get created properly (snd-pcm-oss is loaded properly), not does /proc/asound/cards list anything ('--- no soundcards ---'). The device is properly detected by the linux kernel, as I get properly connect/disconnect messages. I'm using kernel v2.4.20pre4. The device is plugged into a UHCI controller (it's a USB 2.0 NEC controller). I was taking a look around the source to see if I could add the Sonica device ID, but I can't seem to find where to hack it (if it's even needed). Anyhow, the device ID for the Sonica is vend/prod 0x763/0x2805. Any help would be greatly appreciated. Thanks, Stephen Hassard ------------------------------------------------------- This sf.net email is sponsored by: Jabber - The world's fastest growing real-time communications platform! Don't just IM. Build it in! http://www.jabber.com/osdn/xim