From: Vojtech Pavlik <vojtech@suse.cz>
To: Andre Hedrick <andre@linux-ide.org>
Cc: Meelis Roos <mroos@tartu.cyber.ee>, linux-kernel@vger.kernel.org
Subject: Re: Hangs in 2.4.19 and 2.4.20-pre5 (IDE-related?)
Date: Thu, 29 Aug 2002 22:46:21 +0200 [thread overview]
Message-ID: <20020829224621.A4175@ucw.cz> (raw)
In-Reply-To: <Pine.LNX.4.10.10208291235060.24156-100000@master.linux-ide.org>; from andre@linux-ide.org on Thu, Aug 29, 2002 at 12:37:19PM -0700
On Thu, Aug 29, 2002 at 12:37:19PM -0700, Andre Hedrick wrote:
> On Thu, 29 Aug 2002, Meelis Roos wrote:
>
> > pcibus = 33333
> > 00:07.1 vendor=8086 device=7111 class=0101 irq=0 base4=f001
> > ----------PIIX BusMastering IDE Configuration---------------
> > Driver Version: 1.3
> > South Bridge: 28945
> > Revision: IDE 0x1
> > Highest DMA rate: UDMA33
> > BM-DMA base: 0xf000
> > PCI clock: 33.3MHz
> > -----------------------Primary IDE-------Secondary IDE------
> > Enabled: yes yes
> > Simplex only: no no
> > Cable Type: 40w 40w
> > -------------------drive0----drive1----drive2----drive3-----
> > Prefetch+Post: yes yes yes yes
> > Transfer Mode: PIO PIO PIO PIO
> > Address Setup: 90ns 90ns 90ns 90ns
> > Cmd Active: 360ns 360ns 360ns 360ns
> > Cmd Recovery: 540ns 540ns 540ns 540ns
> > Data Active: 90ns 90ns 90ns 90ns
> > Data Recovery: 30ns 30ns 90ns 30ns
> > Cycle Time: 120ns 120ns 180ns 120ns
> > Transfer Rate: 16.6MB/s 16.6MB/s 11.1MB/s 16.6MB/s
>
> That is not my work and you are on your own for that mess.
> That looks straight out of 2.5.30.
Don't be so quick with shooing people away - this is the output of the
'atapci' userspace program. It only reads the PCI config registers and
decodes them into a human readable form. The driver in 2.4.19 Meelis
Roos is using and the crash are both still yours.
--
Vojtech Pavlik
SuSE Labs
next prev parent reply other threads:[~2002-08-29 20:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-29 18:26 Hangs in 2.4.19 and 2.4.20-pre5 (IDE-related?) Meelis Roos
2002-08-29 19:37 ` Andre Hedrick
2002-08-29 20:18 ` Meelis Roos
2002-08-29 20:46 ` Vojtech Pavlik [this message]
2002-08-30 3:04 ` Andre Hedrick
2002-08-30 5:51 ` Vojtech Pavlik
2002-08-30 6:31 ` Andre Hedrick
2002-08-30 6:51 ` Vojtech Pavlik
2002-08-30 14:34 ` Meelis Roos
-- strict thread matches above, loose matches on Subject: below --
2002-09-26 20:37 Joao S Veiga
2002-10-06 14:08 Jan-Hinnerk Reichert
2002-10-06 16:25 ` Alan Cox
2002-10-06 19:56 ` Jan-Hinnerk Reichert
2002-10-06 21:38 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020829224621.A4175@ucw.cz \
--to=vojtech@suse.cz \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mroos@tartu.cyber.ee \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.