From: mbs <mbs@mc.com>
To: Andre Hedrick <andre@linux-ide.org>, Mike Isely <isely@pobox.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: 2.4.20-pre4-ac1 trashed my system
Date: Tue, 3 Sep 2002 08:41:40 -0400 [thread overview]
Message-ID: <200209031237.IAA27024@mc.com> (raw)
In-Reply-To: <Pine.LNX.4.10.10208302313040.1033-100000@master.linux-ide.org>
it trashed mine also.
supermicro p4dp8-g2 mobo
2x 2.2 Xeon
e7500 chipset
wd400 40gb hd
2.4.20-pre4-ac2 + RML preempt patch (applied cleanly)
boot it and eveything runs fine for a short while, then I start getting "bad
CRC" errors and "seek failure" errors.
I have had this problem with both ext2 and ext3
initially I thought it was a bad HD, so I installed a new one on a new cable
and did a complete rh7.3 install ran for a while eith no problems then built
the same kernel over again, rebooted into the new kernel and within seconds
was having problems again.
2.4.19-rc3-ac4 +rml preempt has been dead stable, as has (so far) 2.4.29-ac4
+rml and RH 2.4.18-3 and -5
I am not doing anything funky with hd setup, not even specifying idebus=
this has happened with 40 and 80 wire cables.
if there is any additional info I can provide please let me know.
--
/**************************************************
** Mark Salisbury || mbs@mc.com **
** If you would like to sponsor me for the **
** Mass Getaway, a 150 mile bicycle ride to for **
** MS, contact me to donate by cash or check or **
** click the link below to donate by credit card **
**************************************************/
https://www.nationalmssociety.org/pledge/pledge.asp?participantid=86736
next prev parent reply other threads:[~2002-09-03 12:34 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-29 14:06 2.4.20-pre4-ac1 trashed my system Mike Isely
2002-08-29 15:32 ` Alan Cox
2002-08-29 17:15 ` Andre Hedrick
2002-08-29 18:02 ` Mike Isely
2002-08-29 19:15 ` Mike Isely
2002-08-29 19:28 ` Alan Cox
2002-08-29 19:32 ` Mike Isely
2002-08-30 7:07 ` Mike Isely
2002-08-31 5:04 ` Mike Isely
2002-08-31 5:57 ` Andre Hedrick
2002-08-31 6:07 ` Mike Isely
2002-08-31 6:24 ` Andre Hedrick
2002-08-31 6:57 ` Mike Isely
2002-09-01 5:15 ` Mike Isely
2002-09-02 8:19 ` Joachim Breuer
2002-09-05 6:05 ` Mike Isely
2002-09-02 8:16 ` Joachim Breuer
2002-09-03 12:41 ` mbs [this message]
2002-09-03 14:34 ` Mike Isely
2002-09-03 16:00 ` Alan Cox
2002-09-04 10:21 ` Rogier Wolff
2002-09-03 15:59 ` Alan Cox
2002-09-03 18:33 ` mbs
2002-09-01 2:59 ` Mike Isely
2002-08-31 10:54 ` Vojtech Pavlik
2002-09-05 5:54 ` [PATCH] 2.4.20-pre5-ac2: Promise Controller LBA48 DMA fixed Mike Isely
2002-09-05 12:47 ` Henning P. Schmiedehausen
2002-09-05 14:12 ` Mike Isely
2002-09-05 14:31 ` Alan Cox
2002-09-05 14:33 ` Mike Isely
2002-09-05 14:35 ` Horst von Brand
2002-09-05 14:47 ` Mike Isely
2002-09-05 14:56 ` Tomas Szepe
2002-09-05 15:12 ` Mike Isely
2002-09-05 14:41 ` Tomas Szepe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200209031237.IAA27024@mc.com \
--to=mbs@mc.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=andre@linux-ide.org \
--cc=isely@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.