From: Hans-Peter Jansen <hpj@urpla.net>
To: Alan Cox <alan@redhat.com>, linux-kernel@vger.kernel.org
Subject: Re: Linux 2.4.20-pre5-ac4
Date: Sat, 7 Sep 2002 23:28:27 +0200 [thread overview]
Message-ID: <200209072328.27543.hpj@urpla.net> (raw)
In-Reply-To: <200209061500.g86F08m12929@devserv.devel.redhat.com>
Hi Alan, Andre, and friends,
this happens predictably on dvd mount via ide-scsi with 20-pre5-ac4:
udf: registering filesystem
UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG super.c:1421:udf_read_super: Multi-session=0
UDF-fs DEBUG super.c:410:udf_vrs: Starting at sector 16 (2048 byte sectors)
kernel BUG at /usr/src/linux/include/linux/blkdev.h:153!
invalid operand: 0000
CPU: 0
EIP: 0010:[ide_build_sglist+73/384] Tainted: PF
EFLAGS: 00210206
eax: 0000005a ebx: effc9000 ecx: c02c73c0 edx: e9445140
esi: 00000000 edi: e9445140 ebp: e2e11ba0 esp: e2e11b80
ds: 0018 es: 0018 ss: 0018
Process mount (pid: 1440, stackpage=e2e11000)
Stack: effc9000 c02c7470 e9445140 e4448e80 00000003 0000000d c02c7470 c19f6000
e2e11bcc c019c4a1 c02c73c0 e9445140 c02c73c0 c02c7470 e9445140 ef57c140
00000000 00000000 c02c73c0 e2e11bec c019c97a c02c7470 e9445140 c02c7470
Call Trace: [ide_build_dmatable+81/400] [__ide_dma_read+42/288]·
[nfsd:__insmod_nfsd_O/lib/modules/2.4.20-pre5-ac3/kernel/fs/nfsd/+-30237/96]
[nfsd:__insmod_nfsd_O/lib/modules/2.4.20-pre5-ac3/kernel/fs/nfsd/+-29862/96]
[start_request+389/480] [ide_do_request+597/672] [ide_do_drive_cmd+204/256]
[nfsd:__insmod_nfsd_O/lib/modules/2.4.20-pre5-ac3/kernel/fs/nfsd/+-26784/96]
[nfsd:__insmod_nfsd_O/lib/modules/2.4.20-pre5-ac3/kernel/fs/nfsd/+-100640/96]
[nfsd:__insmod_nfsd_O/lib/modules/2.4.20-pre5-ac3/kernel/fs/nfsd/+-125027/96]
[nfsd:__insmod_nfsd_O/lib/modules/2.4.20-pre5-ac3/kernel/fs/nfsd/+-100096/96]
[nfsd:__insmod_nfsd_O/lib/modules/2.4.20-pre5-ac3/kernel/fs/nfsd/+-93731/96]
[<f29e9ee0>] [generic_unplug_device+34/48] [__run_task_queue+76/96]
[__wait_on_buffer+86/144] [bread+79/112] [<f29fa1b1>] [<f29f658f>] [<f29f7b6e>]
[<f29f8446>] [<f29fccce>] [<f29fc459>] [<f29fc451>] [<f29fcca8>]
[get_sb_bdev+438/544] [<f29fd700>] [<f29fd700>] [alloc_vfsmnt+137/224]
[do_kern_mount+86/256] [<f29fd700>] [do_add_mount+102/336] [do_mount+317/352]
[copy_mount_options+80/176] [sys_mount+124/192] [system_call+51/56]
Code: 0f 0b 99 00 a0 b8 22 c0 8b 45 08 c7 80 24 04 00 00 01 00 00
ide config:
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_BAILOUT=y
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_IDE=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDE_TASKFILE_IO=y
CONFIG_IDE_TASK_IOCTL=y
general setup:
CONFIG_EXPERIMENTAL=y
CONFIG_KMOD=y
CONFIG_MICROCODE=m
CONFIG_MK7=y
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_MTRR=y
CONFIG_NOHIGHMEM=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_UID16=y
CONFIG_X86=y
CONFIG_X86_BSWAP=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_CPUID=m
CONFIG_X86_F00F_WORKS_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INVLPG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_MCE=y
CONFIG_X86_MSR=m
CONFIG_X86_PGE=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_XADD=y
dmesg:
<4>Kernel command line: rw root=/dev/nfs nfsroot=/netboot/%%s,v3
ip=172.16.24.108:172.16.24.102:172.16.24.1:255.255.255.0:
video=matrox:vesa:0x11b,k:200MHz,fh:93kHz,fv:150 hda=ide-scsi hdg=ide-scsi
<4>ide_setup: hda=ide-scsi
<4>ide_setup: hdg=ide-scsi
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 21
<4>VP_IDE: chipset revision 16
<4>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
<4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
<4>PDC20265: IDE controller on PCI bus 00 dev 88
<6>PCI: Found IRQ 10 for device 00:11.0
<6>PCI: Sharing IRQ 10 with 00:0b.0
<4>PDC20265: chipset revision 2
<4>PDC20265: not 100%% native mode: will probe irqs later
<4>PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
<4> ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio
<4> ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:DMA, hdh:DMA
<4>hda: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
<4>hdc: IBM-DPTA-372050, ATA DISK drive
<4>hde: IBM-DTLA-307060, ATA DISK drive
<4>hdg: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ide2 at 0x9400-0x9407,0x9002 on irq 10
<4>ide3 at 0x8800-0x8807,0x8402 on irq 10
<6>SCSI subsystem driver Revision: 1.00
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: TOSHIBA Model: DVD-ROM SD-M1502 Rev: 1012
<4> Type: CD-ROM ANSI SCSI revision: 02
<4> Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.05
<4> Type: CD-ROM ANSI SCSI revision: 02
<6>hdc: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63, UDMA(66)
<6>hde: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=119150/16/63, UDMA(100)
<6>Partition check:
<6> hdc: [PTBL] [2495/255/63] hdc1 hdc2 < hdc5 >
<6> hde: hde1
Anything missing? Just ask. 18-pre4 does that mount smoothly. Besides this glitch,
20-pre5-ac4 "feels" a bit more interactively responsive..
Hans-Peter
next prev parent reply other threads:[~2002-09-07 21:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-06 15:00 Linux 2.4.20-pre5-ac4 Alan Cox
2002-09-06 15:40 ` Adrian Bunk
2002-09-06 16:11 ` Steven Cole
2002-09-06 18:40 ` Hans-Peter Jansen
2002-09-07 21:28 ` Hans-Peter Jansen [this message]
2002-09-07 21:42 ` Adrian Bunk
2002-09-08 11:01 ` Alexander Hoogerhuis
2002-09-08 11:23 ` Adrian Bunk
2002-09-08 11:14 ` Alexander Hoogerhuis
2002-09-08 12:32 ` Hans-Peter Jansen
2002-09-08 12:55 ` Alan Cox
2002-09-08 13:36 ` Hans-Peter Jansen
2002-09-08 15:12 ` Zwane Mwaikambo
2002-09-08 15:23 ` Alexander Hoogerhuis
2002-09-08 17:10 ` Alan Cox
2002-09-08 18:02 ` Rudmer van Dijk
2002-09-08 17:03 ` Alexander Hoogerhuis
2002-09-16 22:12 ` Alexander Hoogerhuis
2002-09-17 7:29 ` Jens Axboe
2002-09-09 14:40 ` Scott Henson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200209072328.27543.hpj@urpla.net \
--to=hpj@urpla.net \
--cc=alan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.