From: Jurriaan <thunder7@xs4all.nl>
To: linux-kernel@vger.kernel.org
Subject: strange 'DMA disabled' message in 2.4.20-pre5-ac6
Date: Fri, 13 Sep 2002 07:45:26 +0200 [thread overview]
Message-ID: <20020913054526.GB510@middle.of.nowhere> (raw)
Why is that 'hda: DMA disabled' message in my boot messages? Further on
DMA is enabled on hda - I don't understand what this message means.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:pio
PDC20265: IDE controller at PCI slot 00:09.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:pio, hdh:DMA
HPT370: IDE controller at PCI slot 00:0e.0
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
ide4: BM-DMA at 0xe000-0xe007, BIOS settings: hdi:DMA, hdj:pio
ide5: BM-DMA at 0xe008-0xe00f, BIOS settings: hdk:DMA, hdl:pio
hda: Maxtor 33073H3, ATA DISK drive
hda: DMA disabled
blk: queue c03b2940, I/O limit 4095Mb (mask 0xffffffff)
hde: IBM-DTLA-307045, ATA DISK drive
blk: queue c03b3268, I/O limit 4095Mb (mask 0xffffffff)
hdg: LITE-ON LTR-40125W, ATAPI CD/DVD-ROM drive
hdi: Maxtor 4G120J6, ATA DISK drive
blk: queue c03b3b90, I/O limit 4095Mb (mask 0xffffffff)
hdk: Maxtor 4G120J6, ATA DISK drive
blk: queue c03b4024, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xac00-0xac07,0xb002 on irq 16
ide3 at 0xb400-0xb407,0xb802 on irq 16
ide4 at 0xd000-0xd007,0xd402 on irq 18
ide5 at 0xd800-0xd807,0xdc02 on irq 18
hda: host protected area => 1
hda: 60032448 sectors (30737 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(100)
hde: host protected area => 1
hde: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63, UDMA(100)
hdi: host protected area => 1
hdi: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
hdk: host protected area => 1
hdk: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
ide-cd: passing drive hdg to ide-scsi emulation.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
hde:<6> [PTBL] [5606/255/63] hde1 hde2
hdi: hdi1 hdi2
hdk: hdk1 hdk2 hdk3
SCSI subsystem driver Revision: 1.00
Kind regards,
Jurriaan
--
"I suspect that he regrets nothing."
"Not until we catch him, at any rate."
"He'll regret getting caught," said Scharde. "No doubt as to that."
Jack Vance - Araminta Station
GNU/Linux 2.4.20-pre5-ac6 SMP/ReiserFS 2x1402 bogomips load av: 0.37 0.14 0.05
reply other threads:[~2002-09-13 5:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020913054526.GB510@middle.of.nowhere \
--to=thunder7@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.