From: lists@sapience.com
To: linux-kernel@vger.kernel.org
Subject: Oops (ide?) with 2.4.20-pre8-ac3 at boot on scsi only smp
Date: Wed, 2 Oct 2002 00:01:35 -0400 [thread overview]
Message-ID: <20021002040135.GA6652@sapience.com> (raw)
hi,
First report - please let me know what more
I can do to help.
gene/
(0) 2.4.20-pre8-ac3 - oops at boot - scsi disks only -
no IDE disks - smp.
(1) Fresh build of 2.4.20-pre8-ac3 - aic7xxx driver in kernel -
oops'es at boot in IDE code with 'Unable to handle kernel NULL pointer'
Does have IDE cdrom and CDRW (latter booted with ide-scsi)
Machine is dual P4 with 1 Gb memory and kernel compiled with 4Gb memory
model. Runs fine under stock redhat 2.4.18-10 kernel
------------------------------------------------------------------------
(2) Oops: (hand entered)
ksymoops 2.4.6 on i686 2.4.18-10smp. Options used
-v /boot/2.4/2.4.20-pre8-ac3/vmlinux (specified)
-K (specified)
-L (specified)
-o /lib/modules/2.4.20-pre8-ac3/ (specified)
-m /boot/2.4/2.4.20-pre8-ac3/System.map (specified)
No modules in ksyms, skipping objects
ide1: BM-DMA at 0xffa8-0xffaf<1> Unable to handle kernel NULL pointer
c01baa84
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01baa84>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: 00000000 ebx: c039c6e0 ecx: c36944cc edx: c02b87d4
esi: c039c6cc edi: 0000ffa8 ebp: 00000000 esp: c34abedc
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c34ab000)
Stack: 00000008 c039c6cc c3694400 c02b87d4 c01bab46 c039c6cc 0000ffa8 00000008
0000ffa8 c039c6cc c0303b81 c039c6cc 0000ffa8 00000008 c01b9356 c039c6cc
0000ffa8 000587f5 c039c6cc c02b87f5 c03901f0 c02b87d4 c01b96c6 c3694400
Call Trace: [<c01bab46>] [<c01b9356>] [<c01b96c6>] [<c01b9737>] [<c01a51d5>]
[<c0105000>] [<c0105078>] [<c0105000>] [<c01071f6>] [<c0105050>]
Code: 8b 80 3c 04 00 00 eb 06 8d 74 26 00 89 f8 89 86 38 04 00 00
>>EIP; c01baa84 <ide_iomio_dma+a4/110> <=====
>>ebx; c039c6e0 <ide_hwifs+480/2c38>
>>edx; c02b87d4 <piix_pci_info+1e0/330>
>>esi; c039c6cc <ide_hwifs+46c/2c38>
Trace; c01bab46 <ide_setup_dma+16/2a0>
Trace; c01b9356 <ide_hwif_setup_dma+b6/f0>
Trace; c01b96c6 <do_ide_setup_pci_device+236/290>
Trace; c01b9737 <ide_setup_pci_device+17/20>
Trace; c01a51d5 <piix_init_one+35/40>
Trace; c0105000 <_stext+0/0>
Trace; c0105078 <init+28/190>
Trace; c0105000 <_stext+0/0>
Trace; c01071f6 <kernel_thread+26/30>
Trace; c0105050 <init+0/190>
Code; c01baa84 <ide_iomio_dma+a4/110>
00000000 <_EIP>:
Code; c01baa84 <ide_iomio_dma+a4/110> <=====
0: 8b 80 3c 04 00 00 mov 0x43c(%eax),%eax <=====
Code; c01baa8a <ide_iomio_dma+aa/110>
6: eb 06 jmp e <_EIP+0xe> c01baa92 <ide_iomio_dma+b2/110>
Code; c01baa8c <ide_iomio_dma+ac/110>
8: 8d 74 26 00 lea 0x0(%esi,1),%esi
Code; c01baa90 <ide_iomio_dma+b0/110>
c: 89 f8 mov %edi,%eax
Code; c01baa92 <ide_iomio_dma+b2/110>
e: 89 86 38 04 00 00 mov %eax,0x438(%esi)
<0>Kernel panic: Attempted to kill init!
------------------------------------------------------------------------
(3) ver_linux:
Linux flash 2.4.18-10smp #1 SMP Wed Aug 7 11:17:48 EDT 2002 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.14
e2fsprogs 1.27
jfsutils 1.0.17
reiserfsprogs 3.x.0j
pcmcia-cs 3.1.22
PPP 2.4.1
isdn4k-utils 3.1pre1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded nfs lockd sunrpc sr_mod emu10k1 sound ac97_codec soundcore radeon agpgart parport_pc lp parport binfmt_misc autofs 3c59x ide-scsi ide-cd cdrom mousedev hid input usb-uhci usbcore ext3 jbd aic7xxx sd_mod scsi_mod
------------------------------------------------------------------------
4) cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Xeon(TM) CPU 1.70GHz
stepping : 2
cpu MHz : 1694.897
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3381.65
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Xeon(TM) CPU 1.70GHz
stepping : 2
cpu MHz : 1694.897
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3381.65
------------------------------------------------------------------------
5) lspci -vvv
00:00.0 Host bridge: Intel Corp. 82850 860 (Wombat) Chipset Host Bridge (MCH) (rev 04)
Subsystem: Dell Computer Corporation: Unknown device 00d8
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ff800000-ff9fffff
Prefetchable memory behind bridge: f0000000-f7ffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:02.0 PCI bridge: Intel Corp. 82860 860 (Wombat) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff500000-ff7fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff300000-ff4fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) (prog-if 80 [Master])
Subsystem: Dell Computer Corporation: Unknown device 00d8
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at ffa0 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 04) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 00d8
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at ff80 [size=32]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
Subsystem: Dell Computer Corporation: Unknown device 00d8
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at bcd0 [size=16]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 04) (prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 00d8
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 23
Region 4: I/O ports at ff60 [size=32]
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 1b8a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 10
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at ec00 [size=256]
Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at c1000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:1f.0 PCI bridge: Intel Corp. 82806AA PCI64 Hub PCI Bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff600000-ff7fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
03:00.0 PIC: Intel Corp. 82806AA PCI64 Hub Advanced Programmable Interrupt Controller (rev 01) (prog-if 20 [IO(X)-APIC])
Subsystem: Intel Corp. 82806AA PCI64 Hub APIC
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at ff6ff000 (32-bit, non-prefetchable) [disabled] [size=4K]
03:0c.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160 Ultra160 SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin A routed to IRQ 20
BIST result: 00
Region 0: I/O ports at dc00 [disabled] [size=256]
Region 1: Memory at ff6fe000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at ff700000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:0e.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 00d8
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin A routed to IRQ 22
BIST result: 00
Region 0: I/O ports at d800 [disabled] [size=256]
Region 1: Memory at ff6fd000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at ff700000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: Dell Computer Corporation: Unknown device 00d8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 10
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at cc80 [size=128]
Region 1: Memory at ff3ffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at ff400000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
04:0c.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) (prog-if 10 [OHCI])
Subsystem: Dell Computer Corporation: Unknown device 00d8
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), cache line size 10
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ff3ff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ff3f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:0e.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
Subsystem: Creative Labs CT4780 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at cc60 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:0e.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at cc58 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
------------------------------------------------------------------------
5) cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: FUJITSU Model: MAM3184MP Rev: 5A01
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: FUJITSU Model: MAM3184MP Rev: 5A01
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: _NEC Model: NR-7800A Rev: 1.0B
Type: CD-ROM ANSI SCSI revision: 02
------------------------------------------------------------------------
next reply other threads:[~2002-10-02 3:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-02 4:01 lists [this message]
2002-10-04 1:44 ` Oops (ide?) with 2.4.20-pre8-ac3 at boot on scsi only smp lists
2002-10-05 2:38 ` lists
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021002040135.GA6652@sapience.com \
--to=lists@sapience.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.