From: Teodor Iacob <Teodor.Iacob@astral.kappa.ro>
To: linux-kernel@vger.kernel.org
Subject: 2.4.1[89] Warning - running *really* short on DMA buffers .. and crash
Date: Wed, 9 Oct 2002 19:04:58 +0300 [thread overview]
Message-ID: <20021009160458.GA23810@linux.kappa.ro> (raw)
Hello,
I have this machine running either 2.4.18 or 19 with the same bad behavior.
I get from time to time the message in the Subject and if I do something
that uses the disk somewhat more it just reboots without any warning.
(for example if I use fsck or I type sync a lot when untarring .. )
Anyway the hardware configuration is like this:
2 X PIII 667MHz
MB chipset VIA VT82C693A/694x SMP board
512MB
2 Intel Etherexpress 82557
and the scsi adapter:
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 19160B Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Vendor: QUANTUM Model: ATLAS10K2-TY184L Rev: DA40
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
SCSI device sda: 35860910 512-byte hdwr sectors (18361 MB)
Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
It's really annoying to have the computer reboot without any warning or message to
track something ...
Teo
reply other threads:[~2002-10-09 15:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021009160458.GA23810@linux.kappa.ro \
--to=teodor.iacob@astral.kappa.ro \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.