Re: Keyboard unuseable on laptop with current 2.5-BK linux

[Vojtech Pavlik <vojtech@suse.cz>]

[-- Attachment #1: Type: text/plain, Size: 926 bytes --]

On Thu, Oct 10, 2002 at 11:34:55AM +1000, Peter Chubb wrote:
> 
> Hi,
> 	With the current BK linux, my AT keyboard and touchpad (PS/2
> emulation) are unuseable on my laptop.
> 
> The laptop uses an Intel 801 integrated controller.
> This is the log output on boot:
> 
> i8042.c: Detected active multiplexing controller,  rev-15.1.
> serio: i8042  port at 0x60,0x64 irq 12
> drivers/usb/host/uhci-hcd.c: 1800: suspend_hc
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> input: AT Set 2 keyboard on isa0060/serio0
> serio: i8042 KBD port at 0x60,0x64 irq 1
> 
> but then keys pressed are totally bogus (e.g., 1234 generates ulkc;
> `a' generates a carriage return, etc.)
> 
> This worked with 2.5.40 vanilla, so it's a recent changeset that's
> caused the problem.

Can you try the attached modified i8042.c?

-- 
Vojtech Pavlik
SuSE Labs

[-- Attachment #2: i8042.c --]
[-- Type: text/plain, Size: 20691 bytes --]

/*
 *  i8042 keyboard and mouse controller driver for Linux
 *
 *  Copyright (c) 1999-2002 Vojtech Pavlik
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 */

#include <asm/io.h>

#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/config.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/sched.h>

MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver");
MODULE_LICENSE("GPL");

MODULE_PARM(i8042_noaux, "1i");
MODULE_PARM(i8042_nomux, "1i");
MODULE_PARM(i8042_unlock, "1i");
MODULE_PARM(i8042_reset, "1i");
MODULE_PARM(i8042_direct, "1i");
MODULE_PARM(i8042_dumbkbd, "1i");

static int i8042_reset;
static int i8042_noaux;
static int i8042_nomux;
static int i8042_unlock;
static int i8042_direct;
static int i8042_dumbkbd;

#undef DEBUG
#include "i8042.h"

spinlock_t i8042_lock = SPIN_LOCK_UNLOCKED;

struct i8042_values {
	int irq;
	unsigned char disable;
	unsigned char irqen;
	unsigned char exists;
	signed char mux;
	unsigned char *name;
	unsigned char *phys;
};

static struct serio i8042_kbd_port;
static struct serio i8042_aux_port;
static unsigned char i8042_initial_ctr;
static unsigned char i8042_ctr;
static unsigned char i8042_last_e0;
static unsigned char i8042_mux_open;
struct timer_list i8042_timer;

extern struct pt_regs *kbd_pt_regs;

static unsigned long i8042_unxlate_seen[256 / BITS_PER_LONG];
static unsigned char i8042_unxlate_table[128] = {
	  0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
	 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
	 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
	 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88,  5,  6,  4, 12,  3,
	 11,  2, 10,  1,  9,119,126,108,117,125,123,107,115,116,121,105,
	114,122,112,113,127, 96, 97,120,  7, 15, 23, 31, 39, 47, 55, 63,
	 71, 79, 86, 94,  8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
	 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
};

static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);

/*
 * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
 * be ready for reading values from it / writing values to it.
 */

static int i8042_wait_read(void)
{
	int i = 0;
	while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
		udelay(50);
		i++;
	}
	return -(i == I8042_CTL_TIMEOUT);
}

static int i8042_wait_write(void)
{
	int i = 0;
	while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
		udelay(50);
		i++;
	}
	return -(i == I8042_CTL_TIMEOUT);
}

/*
 * i8042_flush() flushes all data that may be in the keyboard and mouse buffers
 * of the i8042 down the toilet.
 */

static int i8042_flush(void)
{
	unsigned long flags;
	unsigned char data;
	int i = 0;

	spin_lock_irqsave(&i8042_lock, flags);

	while ((i8042_read_status() & I8042_STR_OBF) && (i++ < I8042_BUFFER_SIZE)) {
		data = i8042_read_data();
		dbg("%02x <- i8042 (flush, %s)", data,
			i8042_read_status() & I8042_STR_AUXDATA ? "aux" : "kbd");
	}

	spin_unlock_irqrestore(&i8042_lock, flags);

	return i;
}

/*
 * i8042_command() executes a command on the i8042. It also sends the input
 * parameter(s) of the commands to it, and receives the output value(s). The
 * parameters are to be stored in the param array, and the output is placed
 * into the same array. The number of the parameters and output values is
 * encoded in bits 8-11 of the command number.
 */

static int i8042_command(unsigned char *param, int command)
{ 
	unsigned long flags;
	int retval = 0, i = 0;

	spin_lock_irqsave(&i8042_lock, flags);

	retval = i8042_wait_write();
	if (!retval) {
		dbg("%02x -> i8042 (command)", command & 0xff);
		i8042_write_command(command & 0xff);
	}
	
	if (!retval)
		for (i = 0; i < ((command >> 12) & 0xf); i++) {
			if ((retval = i8042_wait_write())) break;
			dbg("%02x -> i8042 (parameter)", param[i]);
			i8042_write_data(param[i]);
		}

	if (!retval)
		for (i = 0; i < ((command >> 8) & 0xf); i++) {
			if ((retval = i8042_wait_read())) break;
			if (i8042_read_status() & I8042_STR_AUXDATA) 
				param[i] = ~i8042_read_data();
			else
				param[i] = i8042_read_data();
			dbg("%02x <- i8042 (return)", param[i]);
		}

	spin_unlock_irqrestore(&i8042_lock, flags);

	if (retval)
		dbg("     -- i8042 (timeout)");

	return retval;
}

/*
 * i8042_kbd_write() sends a byte out through the keyboard interface.
 */

static int i8042_kbd_write(struct serio *port, unsigned char c)
{
	unsigned long flags;
	int retval = 0;

	spin_lock_irqsave(&i8042_lock, flags);

	if(!(retval = i8042_wait_write())) {
		dbg("%02x -> i8042 (kbd-data)", c);
		i8042_write_data(c);
	}

	spin_unlock_irqrestore(&i8042_lock, flags);

	return retval;
}

/*
 * i8042_aux_write() sends a byte out through the aux interface.
 */

static int i8042_aux_write(struct serio *port, unsigned char c)
{
	struct i8042_values *values = port->driver;
	int retval;

/*
 * Send the byte out.
 */

	if (values->mux == -1)
		retval = i8042_command(&c, I8042_CMD_AUX_SEND);
	else
		retval = i8042_command(&c, I8042_CMD_MUX_SEND + values->mux);

/*
 * Make sure the interrupt happens and the character is received even
 * in the case the IRQ isn't wired, so that we can receive further
 * characters later.
 */

	i8042_interrupt(0, NULL, NULL);
	return retval;
}


/*
 * i8042_open() is called when a port is open by the higher layer.
 * It allocates the interrupt and enables in in the chip.
 */

static int i8042_open(struct serio *port)
{
	struct i8042_values *values = port->driver;

	i8042_flush();

	if (values->mux != -1)
		if (i8042_mux_open++)
			return 0;

	if (request_irq(values->irq, i8042_interrupt, 0, "i8042", NULL)) {
		printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", values->irq, values->name);
		values->exists = 0;
		serio_unregister_port(port);
		return -1;
	}

	i8042_ctr |= values->irqen;

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
		printk(KERN_ERR "i8042.c: Can't write CTR while opening %s.\n", values->name);
		return -1;
	}

	i8042_interrupt(0, NULL, NULL);

	return 0;
}

/*
 * i8042_close() frees the interrupt, so that it can possibly be used
 * by another driver. We never know - if the user doesn't have a mouse,
 * the BIOS could have used the AUX interupt for PCI.
 */

static void i8042_close(struct serio *port)
{
	struct i8042_values *values = port->driver;

	if (values->mux != -1)
		if (--i8042_mux_open)
			return;

	i8042_ctr &= ~values->irqen;

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
		printk(KERN_ERR "i8042.c: Can't write CTR while closing %s.\n", values->name);
		return;
	}

	free_irq(values->irq, NULL);

	i8042_flush();
}

/*
 * Structures for registering the devices in the serio.c module.
 */

static struct i8042_values i8042_kbd_values = {
	.irqen =	I8042_CTR_KBDINT,
	.disable =	I8042_CTR_KBDDIS,
	.name =		"KBD",
	.mux =		-1,
};

static struct serio i8042_kbd_port =
{
	.type =		SERIO_8042,
	.write =	i8042_kbd_write,
	.open =		i8042_open,
	.close =	i8042_close,
	.driver =	&i8042_kbd_values,
	.name =		"i8042 Kbd Port",
	.phys =		I8042_KBD_PHYS_DESC,
};

static struct i8042_values i8042_aux_values = {
	.irqen =	I8042_CTR_AUXINT,
	.disable =	I8042_CTR_AUXDIS,
	.name =		"AUX",
	.mux =		-1,
};

static struct serio i8042_aux_port =
{
	.type =		SERIO_8042,
	.write =	i8042_aux_write,
	.open =		i8042_open,
	.close =	i8042_close,
	.driver =	&i8042_aux_values,
	.name =		"i8042 Aux Port",
	.phys =		I8042_AUX_PHYS_DESC,
};

static struct i8042_values i8042_mux_values[4];
static struct serio i8042_mux_port[4];
static char i8042_mux_names[4][16];
static char i8042_mux_short[4][8];
static char i8042_mux_phys[4][32];

/*
 * i8042_interrupt() is the most important function in this driver -
 * it handles the interrupts from the i8042, and sends incoming bytes
 * to the upper layers.
 */

static void i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
	unsigned long flags;
	unsigned char str, data;
	unsigned int dfl;
	struct {
		int data;
		int str;
	} buffer[I8042_BUFFER_SIZE];
	int i, j = 0;

#ifdef CONFIG_VT
	kbd_pt_regs = regs;
#endif

	spin_lock_irqsave(&i8042_lock, flags);

	while (j < I8042_BUFFER_SIZE && 
	    (buffer[j].str = i8042_read_status()) & I8042_STR_OBF)
		buffer[j++].data = i8042_read_data();

	spin_unlock_irqrestore(&i8042_lock, flags);

	for (i = 0; i < j; i++) {

		str = buffer[i].str;
		data = buffer[i].data;

		dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) |
		      ((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);

		if (i8042_mux_values[0].exists && (buffer[i].str & I8042_STR_AUXDATA)) {

			if (buffer[i].str & I8042_STR_MUXERR) {
				switch (buffer[i].data) {
					case 0xfd:
					case 0xfe: dfl = SERIO_TIMEOUT; break;
					case 0xff: dfl = SERIO_PARITY; break;
				}
				buffer[i].data = 0xfe;
			} else dfl = 0;

			dbg("%02x <- i8042 (interrupt, aux%d, %d%s%s)",
				data, (str >> 6), irq, 
				dfl & SERIO_PARITY ? ", bad parity" : "",
				dfl & SERIO_TIMEOUT ? ", timeout" : "");

			if (i8042_mux_values[(str >> 6)].exists)
				serio_interrupt(i8042_mux_port + (str >> 6), buffer[i].data, dfl);
			continue;
		}

		dbg("%02x <- i8042 (interrupt, %s, %d%s%s)",
			data, (str & I8042_STR_AUXDATA) ? "aux" : "kbd", irq, 
			dfl & SERIO_PARITY ? ", bad parity" : "",
			dfl & SERIO_TIMEOUT ? ", timeout" : "");

		if (i8042_aux_values.exists && (buffer[i].str & I8042_STR_AUXDATA)) {
			serio_interrupt(&i8042_aux_port, buffer[i].data, dfl);
			continue;
		}

		if (!i8042_kbd_values.exists)
			continue;

		if (i8042_direct) {
			serio_interrupt(&i8042_kbd_port, data, dfl);
			continue;
		}

		if (data > 0x7f) {
			unsigned char index = (data & 0x7f) | (i8042_last_e0 << 7);
			if (index == 0xaa || index == 0xb6)
				set_bit(index, i8042_unxlate_seen);
			if (test_and_clear_bit(index, i8042_unxlate_seen)) {
				serio_interrupt(&i8042_kbd_port, 0xf0, dfl);
				data = i8042_unxlate_table[data & 0x7f];
			}
		} else {
			set_bit(data | (i8042_last_e0 << 7), i8042_unxlate_seen);
			data = i8042_unxlate_table[data];
		}

		i8042_last_e0 = (data == 0xe0);

		serio_interrupt(&i8042_kbd_port, data, dfl);
	}

}

/*
 * i8042_controller init initializes the i8042 controller, and,
 * most importantly, sets it into non-xlated mode if that's
 * desired.
 */
	
static int __init i8042_controller_init(void)
{

/*
 * Test the i8042. We need to know if it thinks it's working correctly
 * before doing anything else.
 */

	i8042_flush();

	if (i8042_reset) {

		unsigned char param;

		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
			return -1;
		}

		if (param != I8042_RET_CTL_TEST) {
			printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
				 param, I8042_RET_CTL_TEST);
			return -1;
		}
	}

/*
 * Save the CTR for restoral on unload / reboot.
 */

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
		printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
		return -1;
	}

	i8042_initial_ctr = i8042_ctr;

/*
 * Disable the keyboard interface and interrupt. 
 */

	i8042_ctr |= I8042_CTR_KBDDIS;
	i8042_ctr &= ~I8042_CTR_KBDINT;

/*
 * Handle keylock.
 */

	if (~i8042_read_status() & I8042_STR_KEYLOCK) {
		if (i8042_unlock)
			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
		 else
			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
	}

/*
 * If the chip is configured into nontranslated mode by the BIOS, don't
 * bother enabling translating and be happy.
 */

	if (~i8042_ctr & I8042_CTR_XLATE)
		i8042_direct = 1;

/*
 * Set nontranslated mode for the kbd interface if requested by an option.
 * After this the kbd interface becomes a simple serial in/out, like the aux
 * interface is. We don't do this by default, since it can confuse notebook
 * BIOSes.
 */

	if (i8042_direct)
		i8042_ctr &= ~I8042_CTR_XLATE;

/*
 * Write CTR back.
 */

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
		return -1;
	}

	return 0;
}

/*
 * Here we try to reset everything back to a state in which the BIOS will be
 * able to talk to the hardware when rebooting.
 */

void i8042_controller_cleanup(void)
{
	int i;

	i8042_flush();

/*
 * Reset anything that is connected to the ports.
 */

	if (i8042_kbd_values.exists)
		serio_cleanup(&i8042_kbd_port);

	if (i8042_aux_values.exists)
		serio_cleanup(&i8042_aux_port);

	for (i = 0; i < 4; i++)
		if (i8042_mux_values[i].exists)
			serio_cleanup(i8042_mux_port + i);

/*
 * Reset the controller.
 */

	if (i8042_reset) {
		unsigned char param;

		if (i8042_command(&param, I8042_CMD_CTL_TEST))
			printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n");
	}

/*
 * Restore the original control register setting.
 */

	i8042_ctr = i8042_initial_ctr;

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");

}

/*
 * i8042_check_mux() checks whether the controller supports the PS/2 Active
 * Multiplexing specification by Synaptics, Phoenix, Insyde and
 * LCS/Telegraphics.
 */

static int __init i8042_check_mux(struct i8042_values *values)
{
	unsigned char param;
	int i;

/*
 * Check if AUX irq is available.
 */

	if (request_irq(values->irq, i8042_interrupt, 0, "i8042", NULL))
                return -1;
	free_irq(values->irq, NULL);

/*
 * Get rid of bytes in the queue.
 */

	i8042_flush();

/*
 * Internal loopback test - send three bytes, they should come back from the
 * mouse interface, the last should be version. Note that we negate mouseport
 * command responses for the i8042_check_aux() routine.
 */

	param = 0xf0;
	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x0f)
		return -1;
	param = 0x56;
	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa9)
		return -1;
	param = 0xa4;
	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == 0x5b)
		return -1;

	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev%d.%d.\n",
		(~param >> 4) & 0xf, ~param & 0xf);
 
/*
 * Re-read the CTR to check if the KBD controller switched off scancode
 * translation.
 */

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
		printk(KERN_ERR "i8042.c: Can't read CTR while initializing MUX.\n");
		return -1;
	}

	if (~i8042_ctr & I8042_CTR_XLATE) {
		printk(KERN_INFO "i8042.c: Controller uses untranslated KBD in MUX mode.\n");
		i8042_direct = 1;
	}

/*
 * Disable all muxed ports by disabling AUX.
 */

	i8042_ctr &= I8042_CTR_AUXDIS;
	i8042_ctr &= ~I8042_CTR_AUXINT;

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
		return -1;

/*
 * Enable all muxed ports.
 */

	for (i = 0; i < 4; i++) {
		i8042_command(&param, I8042_CMD_MUX_PFX + i);
		i8042_command(&param, I8042_CMD_AUX_ENABLE);
	}

	return 0;
}

/*
 * i8042_check_aux() applies as much paranoia as it can at detecting
 * the presence of an AUX interface.
 */

static int __init i8042_check_aux(struct i8042_values *values)
{
	unsigned char param;

/*
 * Check if AUX irq is available. If it isn't, then there is no point
 * in trying to detect AUX presence.
 */

	if (request_irq(values->irq, i8042_interrupt, 0, "i8042", NULL))
                return -1;
	free_irq(values->irq, NULL);

/*
 * Get rid of bytes in the queue.
 */

	i8042_flush();

/*
 * Internal loopback test - filters out AT-type i8042's. Unfortunately
 * SiS screwed up and their 5597 doesn't support the LOOP command even
 * though it has an AUX port.
 */

	param = 0x5a;
	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa5) {

/*
 * External connection test - filters out AT-soldered PS/2 i8042's
 * 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error
 * 0xfa - no error on some notebooks which ignore the spec
 * Because it's common for chipsets to return error on perfectly functioning
 * AUX ports, we test for this only when the LOOP command failed.
 */

		if (i8042_command(&param, I8042_CMD_AUX_TEST)
		    	|| (param && param != 0xfa && param != 0xff))
				return -1;
	}

/*
 * Bit assignment test - filters out PS/2 i8042's in AT mode
 */
	
	if (i8042_command(&param, I8042_CMD_AUX_DISABLE))
		return -1;
	if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS))
		return -1;	

	if (i8042_command(&param, I8042_CMD_AUX_ENABLE))
		return -1;
	if (i8042_command(&param, I8042_CMD_CTL_RCTR) || (param & I8042_CTR_AUXDIS))
		return -1;	

/*
 * Disable the interface.
 */

	i8042_ctr |= I8042_CTR_AUXDIS;
	i8042_ctr &= ~I8042_CTR_AUXINT;

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
		return -1;

	return 0;
}

/*
 * i8042_port_register() marks the device as existing,
 * registers it, and reports to the user.
 */

static int __init i8042_port_register(struct i8042_values *values, struct serio *port)
{
	values->exists = 1;

	i8042_ctr &= ~values->disable;

	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
		printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n");
		return -1; 
	}

	serio_register_port(port);

	printk(KERN_INFO "serio: i8042 %s port at %#lx,%#lx irq %d\n",
	       values->name,
	       (unsigned long) I8042_DATA_REG,
	       (unsigned long) I8042_COMMAND_REG,
	       values->irq);

	return 0;
}

static void i8042_timer_func(unsigned long data)
{
	i8042_interrupt(0, NULL, NULL);
	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
}

#ifndef MODULE
static int __init i8042_setup_reset(char *str)
{
	i8042_reset = 1;
	return 1;
}
static int __init i8042_setup_noaux(char *str)
{
	i8042_noaux = 1;
	i8042_nomux = 1;
	return 1;
}
static int __init i8042_setup_nomux(char *str)
{
	i8042_nomux = 1;
	return 1;
}
static int __init i8042_setup_unlock(char *str)
{
	i8042_unlock = 1;
	return 1;
}
static int __init i8042_setup_direct(char *str)
{
	i8042_direct = 1;
	return 1;
}
static int __init i8042_setup_dumbkbd(char *str)
{
	i8042_dumbkbd = 1;
	return 1;
}

__setup("i8042_reset", i8042_setup_reset);
__setup("i8042_noaux", i8042_setup_noaux);
__setup("i8042_nomux", i8042_setup_nomux);
__setup("i8042_unlock", i8042_setup_unlock);
__setup("i8042_direct", i8042_setup_direct);
__setup("i8042_dumbkbd", i8042_setup_dumbkbd);
#endif

/*
 * We need to reset the 8042 back to original mode on system shutdown,
 * because otherwise BIOSes will be confused.
 */

static int i8042_notify_sys(struct notifier_block *this, unsigned long code,
        		    void *unused)
{
        if (code==SYS_DOWN || code==SYS_HALT) 
        	i8042_controller_cleanup();
        return NOTIFY_DONE;
}

static struct notifier_block i8042_notifier=
{
        i8042_notify_sys,
        NULL,
        0
};

static void __init i8042_init_mux_values(struct i8042_values *values, struct serio *port, int index)
{
	memcpy(port, &i8042_aux_port, sizeof(struct serio));
	memcpy(values, &i8042_aux_values, sizeof(struct i8042_values));
	sprintf(i8042_mux_names[index], "i8042 Aux-%d Port", index);
	sprintf(i8042_mux_phys[index], I8042_MUX_PHYS_DESC, index + 1);
	sprintf(i8042_mux_short[index], "AUX%d", index);
	port->name = i8042_mux_names[index];
	port->phys = i8042_mux_phys[index];
	values->name = i8042_mux_short[index];
	values->mux = index;
}

int __init i8042_init(void)
{
	int i;

	dbg_init();

	if (i8042_platform_init())
		return -EBUSY;

	i8042_aux_values.irq = I8042_AUX_IRQ;
	i8042_kbd_values.irq = I8042_KBD_IRQ;

	if (i8042_controller_init())
		return -ENODEV;

	if (i8042_dumbkbd)
		i8042_kbd_port.write = NULL;

	for (i = 0; i < 4; i++)
		i8042_init_mux_values(i8042_mux_values + i, i8042_mux_port + i, i);

	if (!i8042_nomux && !i8042_check_mux(&i8042_aux_values))
		for (i = 0; i < 4; i++)
			i8042_port_register(i8042_mux_values + i, i8042_mux_port + i);
	else 
		if (!i8042_noaux && !i8042_check_aux(&i8042_aux_values))
			i8042_port_register(&i8042_aux_values, &i8042_aux_port);

	i8042_port_register(&i8042_kbd_values, &i8042_kbd_port);

	i8042_timer.function = i8042_timer_func;
	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);

	register_reboot_notifier(&i8042_notifier);

	return 0;
}

void __exit i8042_exit(void)
{
	int i;

	unregister_reboot_notifier(&i8042_notifier);

	del_timer(&i8042_timer);

	i8042_controller_cleanup();
	
	if (i8042_kbd_values.exists)
		serio_unregister_port(&i8042_kbd_port);

	if (i8042_aux_values.exists)
		serio_unregister_port(&i8042_aux_port);
	
	for (i = 0; i < 4; i++)
		if (i8042_mux_values[i].exists)
			serio_unregister_port(i8042_mux_port + i);

	i8042_platform_exit();
}

module_init(i8042_init);
module_exit(i8042_exit);