From: Kenny Simpson <theonetruekenny@yahoo.com>
To: linux-kernel@vger.kernel.org
Subject: [PATCH] exception typos
Date: Sun, 27 Oct 2002 00:17:42 -0700 (PDT) [thread overview]
Message-ID: <20021027071742.75385.qmail@web20002.mail.yahoo.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 7369 bytes --]
'exception' seems to be a hard word to spell.
This patch fixes the use of 'exeption' and
'execption'.
Here is the patch (I'm also attaching it in case this
webmail wraps the lines)
diff -ruN linux-2.5.44/arch/i386/kernel/entry.S
linux/arch/i386/kernel/entry.S
--- linux-2.5.44/arch/i386/kernel/entry.S Sat Oct 19
00:01:19 2002
+++ linux/arch/i386/kernel/entry.S Sun Oct 27 01:42:17
2002
@@ -211,7 +211,7 @@
movl TI_FLAGS(%ebx), %ecx # need_resched set ?
testb $_TIF_NEED_RESCHED, %cl
jz restore_all
- testl $IF_MASK,EFLAGS(%esp) # interrupts off
(execption path) ?
+ testl $IF_MASK,EFLAGS(%esp) # interrupts off
(exception path) ?
jz restore_all
movl $PREEMPT_ACTIVE,TI_PRE_COUNT(%ebx)
sti
diff -ruN linux-2.5.44/arch/m68k/lib/checksum.c
linux/arch/m68k/lib/checksum.c
--- linux-2.5.44/arch/m68k/lib/checksum.c Sat Oct 19
00:02:35 2002
+++ linux/arch/m68k/lib/checksum.c Sun Oct 27 02:05:29
2002
@@ -243,7 +243,7 @@
"8:\n"
".section .fixup,\"ax\"\n"
".even\n"
- /* If any execption occurs zero out the rest.
+ /* If any exception occurs zero out the rest.
Similarities with the code above are intentional
:-) */
"90:\t"
"clrw %3@+\n\t"
diff -ruN linux-2.5.44/arch/mips64/config.in
linux/arch/mips64/config.in
--- linux-2.5.44/arch/mips64/config.in Sat Oct 19
00:02:24 2002
+++ linux/arch/mips64/config.in Sun Oct 27 02:05:47
2002
@@ -239,7 +239,7 @@
#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Are you using a crosscompiler'
CONFIG_CROSSCOMPILE
if [ "$CONFIG_MODULES" = "y" ]; then
- bool ' Build fp execption handler module'
CONFIG_MIPS_FPE_MODULE
+ bool ' Build fp exception handler module'
CONFIG_MIPS_FPE_MODULE
fi
bool 'Remote GDB kernel debugging'
CONFIG_REMOTE_DEBUG
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
diff -ruN
linux-2.5.44/arch/ppc/boot/simple/rw4/ppc_40x.h
linux/arch/ppc/boot/simple/rw4/ppc_40x.h
--- linux-2.5.44/arch/ppc/boot/simple/rw4/ppc_40x.h
Sat Oct 19 00:01:16 2002
+++ linux/arch/ppc/boot/simple/rw4/ppc_40x.h Sun Oct
27 02:08:44 2002
@@ -41,9 +41,9 @@
#define dbsr 0x3f0 /* debug
status register */
#define dccr 0x3fa /* data
cache control reg. */
#define dcwr 0x3ba /* data
cache write-thru reg */
-#define dear 0x3d5 /* data
exeption address reg */
-#define esr 0x3d4 /*
execption syndrome registe */
-#define evpr 0x3d6 /*
exeption vector prefix reg */
+#define dear 0x3d5 /* data
exception address reg */
+#define esr 0x3d4 /*
exception syndrome registe */
+#define evpr 0x3d6 /*
exception vector prefix reg */
#define iccr 0x3fb /*
instruction cache cntrl re */
#define icdbdr 0x3d3 /* instr
cache dbug data reg */
#define lrreg 0x008 /* link
register */
diff -ruN
linux-2.5.44/drivers/acpi/namespace/nsxfobj.c
linux/drivers/acpi/namespace/nsxfobj.c
--- linux-2.5.44/drivers/acpi/namespace/nsxfobj.c Sat
Oct 19 00:00:42 2002
+++ linux/drivers/acpi/namespace/nsxfobj.c Sun Oct 27
02:10:38 2002
@@ -141,7 +141,7 @@
*ret_handle =
acpi_ns_convert_entry_to_handle
(acpi_ns_get_parent_node (node));
- /* Return exeption if parent is null */
+ /* Return exception if parent is null */
if (!acpi_ns_get_parent_node (node)) {
status = AE_NULL_ENTRY;
diff -ruN
linux-2.5.44/drivers/isdn/hardware/eicon/mi_pc.h
linux/drivers/isdn/hardware/eicon/mi_pc.h
--- linux-2.5.44/drivers/isdn/hardware/eicon/mi_pc.h
Sat Oct 19 00:01:55 2002
+++ linux/drivers/isdn/hardware/eicon/mi_pc.h Sun Oct
27 02:10:57 2002
@@ -65,7 +65,7 @@
#define _MP_LED1 0x04 /* 1 = on
*/
#define _MP_DSP_RESET 0x02 /* active lo
*/
#define _MP_RISC_RESET 0x81 /* active hi,
bit 7 for compatibility with old boards */
-/* CPU exeption context structure in MP shared ram
after trap */
+/* CPU exception context structure in MP shared ram
after trap */
typedef struct mp_xcptcontext_s MP_XCPTC;
struct mp_xcptcontext_s {
dword sr;
diff -ruN linux-2.5.44/drivers/md/lvm-snap.c
linux/drivers/md/lvm-snap.c
--- linux-2.5.44/drivers/md/lvm-snap.c Sat Oct 19
00:02:27 2002
+++ linux/drivers/md/lvm-snap.c Sun Oct 27 02:06:12
2002
@@ -387,7 +387,7 @@
#endif
/* the original chunk is now stored on the snapshot
volume
- so update the execption table */
+ so update the exception table */
lv_snap->u.lv_block_exception[idx].rdev_org =
org_phys_dev;
lv_snap->u.lv_block_exception[idx].rsector_org =
org_start;
diff -ruN linux-2.5.44/drivers/net/sk98lin/h/skgehw.h
linux/drivers/net/sk98lin/h/skgehw.h
--- linux-2.5.44/drivers/net/sk98lin/h/skgehw.h Sat
Oct 19 00:02:33 2002
+++ linux/drivers/net/sk98lin/h/skgehw.h Sun Oct 27
02:07:17 2002
@@ -813,7 +813,7 @@
/* Bit 31..12: reserved */
#define IS_IRQ_MST_ERR (1L<<11) /* Bit 11: IRQ master
error */
/* PERR,RMABORT,RTABORT,DATAPERR */
-#define IS_IRQ_STAT (1L<<10) /* Bit 10: IRQ status
execption */
+#define IS_IRQ_STAT (1L<<10) /* Bit 10: IRQ status
exception */
/* RMABORT, RTABORT, DATAPERR */
#define IS_NO_STAT_M1 (1L<<9) /* Bit 9: No Rx Status
from MAC1*/
#define IS_NO_STAT_M2 (1L<<8) /* Bit 8: No Rx Status
from MAC2*/
diff -ruN linux-2.5.44/drivers/net/skfp/h/skfbi.h
linux/drivers/net/skfp/h/skfbi.h
--- linux-2.5.44/drivers/net/skfp/h/skfbi.h Sat Oct 19
00:01:51 2002
+++ linux/drivers/net/skfp/h/skfbi.h Sun Oct 27
02:06:50 2002
@@ -1308,7 +1308,7 @@
#define IS_I2C_READY (1L<<27) /* Bit 27: (ML) IRQ on
end of I2C tx */
#define IS_IRQ_SW (1L<<26) /* Bit 26: (ML) SW forced
IRQ */
#define IS_EXT_REG (1L<<25) /* Bit 25: (ML) IRQ from
external reg*/
-#define IS_IRQ_STAT (1L<<24) /* Bit 24: IRQ status
execption */
+#define IS_IRQ_STAT (1L<<24) /* Bit 24: IRQ status
exception */
/* PERR, RMABORT, RTABORT DATAPERR */
#define IS_IRQ_MST_ERR (1L<<23) /* Bit 23: IRQ master
error */
/* RMABORT, RTABORT, DATAPERR */
@@ -1360,7 +1360,7 @@
#define IRQ_I2C_READY (1L<<27) /* Bit 27: (ML) IRQ on
end of I2C tx */
#define IRQ_SW (1L<<26) /* Bit 26: (ML) SW forced
IRQ */
#define IRQ_EXT_REG (1L<<25) /* Bit 25: (ML) IRQ from
external reg*/
-#define IRQ_STAT (1L<<24) /* Bit 24: IRQ status
execption */
+#define IRQ_STAT (1L<<24) /* Bit 24: IRQ status
exception */
/* PERR, RMABORT, RTABORT DATAPERR */
#define IRQ_MST_ERR (1L<<23) /* Bit 23: IRQ master
error */
/* RMABORT, RTABORT, DATAPERR */
diff -ruN linux-2.5.44/drivers/sbus/char/bpp.c
linux/drivers/sbus/char/bpp.c
--- linux-2.5.44/drivers/sbus/char/bpp.c Sat Oct 19
00:01:08 2002
+++ linux/drivers/sbus/char/bpp.c Sun Oct 27 02:11:19
2002
@@ -95,7 +95,7 @@
/*
* These are for data access.
* Control lines accesses are hidden in set_bits()
and get_bits().
- * The exeption is the probe procedure, which is
system-dependent.
+ * The exception is the probe procedure, which is
system-dependent.
*/
#define bpp_outb_p(data, base) outb_p((data),
(base))
#define bpp_inb(base) inb(base)
-Kenny
__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: exception_patch --]
[-- Type: text/x-diff; name=exception_patch, Size: 7030 bytes --]
diff -ruN linux-2.5.44/arch/i386/kernel/entry.S linux/arch/i386/kernel/entry.S
--- linux-2.5.44/arch/i386/kernel/entry.S Sat Oct 19 00:01:19 2002
+++ linux/arch/i386/kernel/entry.S Sun Oct 27 01:42:17 2002
@@ -211,7 +211,7 @@
movl TI_FLAGS(%ebx), %ecx # need_resched set ?
testb $_TIF_NEED_RESCHED, %cl
jz restore_all
- testl $IF_MASK,EFLAGS(%esp) # interrupts off (execption path) ?
+ testl $IF_MASK,EFLAGS(%esp) # interrupts off (exception path) ?
jz restore_all
movl $PREEMPT_ACTIVE,TI_PRE_COUNT(%ebx)
sti
diff -ruN linux-2.5.44/arch/m68k/lib/checksum.c linux/arch/m68k/lib/checksum.c
--- linux-2.5.44/arch/m68k/lib/checksum.c Sat Oct 19 00:02:35 2002
+++ linux/arch/m68k/lib/checksum.c Sun Oct 27 02:05:29 2002
@@ -243,7 +243,7 @@
"8:\n"
".section .fixup,\"ax\"\n"
".even\n"
- /* If any execption occurs zero out the rest.
+ /* If any exception occurs zero out the rest.
Similarities with the code above are intentional :-) */
"90:\t"
"clrw %3@+\n\t"
diff -ruN linux-2.5.44/arch/mips64/config.in linux/arch/mips64/config.in
--- linux-2.5.44/arch/mips64/config.in Sat Oct 19 00:02:24 2002
+++ linux/arch/mips64/config.in Sun Oct 27 02:05:47 2002
@@ -239,7 +239,7 @@
#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
if [ "$CONFIG_MODULES" = "y" ]; then
- bool ' Build fp execption handler module' CONFIG_MIPS_FPE_MODULE
+ bool ' Build fp exception handler module' CONFIG_MIPS_FPE_MODULE
fi
bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
diff -ruN linux-2.5.44/arch/ppc/boot/simple/rw4/ppc_40x.h linux/arch/ppc/boot/simple/rw4/ppc_40x.h
--- linux-2.5.44/arch/ppc/boot/simple/rw4/ppc_40x.h Sat Oct 19 00:01:16 2002
+++ linux/arch/ppc/boot/simple/rw4/ppc_40x.h Sun Oct 27 02:08:44 2002
@@ -41,9 +41,9 @@
#define dbsr 0x3f0 /* debug status register */
#define dccr 0x3fa /* data cache control reg. */
#define dcwr 0x3ba /* data cache write-thru reg */
-#define dear 0x3d5 /* data exeption address reg */
-#define esr 0x3d4 /* execption syndrome registe */
-#define evpr 0x3d6 /* exeption vector prefix reg */
+#define dear 0x3d5 /* data exception address reg */
+#define esr 0x3d4 /* exception syndrome registe */
+#define evpr 0x3d6 /* exception vector prefix reg */
#define iccr 0x3fb /* instruction cache cntrl re */
#define icdbdr 0x3d3 /* instr cache dbug data reg */
#define lrreg 0x008 /* link register */
diff -ruN linux-2.5.44/drivers/acpi/namespace/nsxfobj.c linux/drivers/acpi/namespace/nsxfobj.c
--- linux-2.5.44/drivers/acpi/namespace/nsxfobj.c Sat Oct 19 00:00:42 2002
+++ linux/drivers/acpi/namespace/nsxfobj.c Sun Oct 27 02:10:38 2002
@@ -141,7 +141,7 @@
*ret_handle =
acpi_ns_convert_entry_to_handle (acpi_ns_get_parent_node (node));
- /* Return exeption if parent is null */
+ /* Return exception if parent is null */
if (!acpi_ns_get_parent_node (node)) {
status = AE_NULL_ENTRY;
diff -ruN linux-2.5.44/drivers/isdn/hardware/eicon/mi_pc.h linux/drivers/isdn/hardware/eicon/mi_pc.h
--- linux-2.5.44/drivers/isdn/hardware/eicon/mi_pc.h Sat Oct 19 00:01:55 2002
+++ linux/drivers/isdn/hardware/eicon/mi_pc.h Sun Oct 27 02:10:57 2002
@@ -65,7 +65,7 @@
#define _MP_LED1 0x04 /* 1 = on */
#define _MP_DSP_RESET 0x02 /* active lo */
#define _MP_RISC_RESET 0x81 /* active hi, bit 7 for compatibility with old boards */
-/* CPU exeption context structure in MP shared ram after trap */
+/* CPU exception context structure in MP shared ram after trap */
typedef struct mp_xcptcontext_s MP_XCPTC;
struct mp_xcptcontext_s {
dword sr;
diff -ruN linux-2.5.44/drivers/md/lvm-snap.c linux/drivers/md/lvm-snap.c
--- linux-2.5.44/drivers/md/lvm-snap.c Sat Oct 19 00:02:27 2002
+++ linux/drivers/md/lvm-snap.c Sun Oct 27 02:06:12 2002
@@ -387,7 +387,7 @@
#endif
/* the original chunk is now stored on the snapshot volume
- so update the execption table */
+ so update the exception table */
lv_snap->u.lv_block_exception[idx].rdev_org = org_phys_dev;
lv_snap->u.lv_block_exception[idx].rsector_org = org_start;
diff -ruN linux-2.5.44/drivers/net/sk98lin/h/skgehw.h linux/drivers/net/sk98lin/h/skgehw.h
--- linux-2.5.44/drivers/net/sk98lin/h/skgehw.h Sat Oct 19 00:02:33 2002
+++ linux/drivers/net/sk98lin/h/skgehw.h Sun Oct 27 02:07:17 2002
@@ -813,7 +813,7 @@
/* Bit 31..12: reserved */
#define IS_IRQ_MST_ERR (1L<<11) /* Bit 11: IRQ master error */
/* PERR,RMABORT,RTABORT,DATAPERR */
-#define IS_IRQ_STAT (1L<<10) /* Bit 10: IRQ status execption */
+#define IS_IRQ_STAT (1L<<10) /* Bit 10: IRQ status exception */
/* RMABORT, RTABORT, DATAPERR */
#define IS_NO_STAT_M1 (1L<<9) /* Bit 9: No Rx Status from MAC1*/
#define IS_NO_STAT_M2 (1L<<8) /* Bit 8: No Rx Status from MAC2*/
diff -ruN linux-2.5.44/drivers/net/skfp/h/skfbi.h linux/drivers/net/skfp/h/skfbi.h
--- linux-2.5.44/drivers/net/skfp/h/skfbi.h Sat Oct 19 00:01:51 2002
+++ linux/drivers/net/skfp/h/skfbi.h Sun Oct 27 02:06:50 2002
@@ -1308,7 +1308,7 @@
#define IS_I2C_READY (1L<<27) /* Bit 27: (ML) IRQ on end of I2C tx */
#define IS_IRQ_SW (1L<<26) /* Bit 26: (ML) SW forced IRQ */
#define IS_EXT_REG (1L<<25) /* Bit 25: (ML) IRQ from external reg*/
-#define IS_IRQ_STAT (1L<<24) /* Bit 24: IRQ status execption */
+#define IS_IRQ_STAT (1L<<24) /* Bit 24: IRQ status exception */
/* PERR, RMABORT, RTABORT DATAPERR */
#define IS_IRQ_MST_ERR (1L<<23) /* Bit 23: IRQ master error */
/* RMABORT, RTABORT, DATAPERR */
@@ -1360,7 +1360,7 @@
#define IRQ_I2C_READY (1L<<27) /* Bit 27: (ML) IRQ on end of I2C tx */
#define IRQ_SW (1L<<26) /* Bit 26: (ML) SW forced IRQ */
#define IRQ_EXT_REG (1L<<25) /* Bit 25: (ML) IRQ from external reg*/
-#define IRQ_STAT (1L<<24) /* Bit 24: IRQ status execption */
+#define IRQ_STAT (1L<<24) /* Bit 24: IRQ status exception */
/* PERR, RMABORT, RTABORT DATAPERR */
#define IRQ_MST_ERR (1L<<23) /* Bit 23: IRQ master error */
/* RMABORT, RTABORT, DATAPERR */
diff -ruN linux-2.5.44/drivers/sbus/char/bpp.c linux/drivers/sbus/char/bpp.c
--- linux-2.5.44/drivers/sbus/char/bpp.c Sat Oct 19 00:01:08 2002
+++ linux/drivers/sbus/char/bpp.c Sun Oct 27 02:11:19 2002
@@ -95,7 +95,7 @@
/*
* These are for data access.
* Control lines accesses are hidden in set_bits() and get_bits().
- * The exeption is the probe procedure, which is system-dependent.
+ * The exception is the probe procedure, which is system-dependent.
*/
#define bpp_outb_p(data, base) outb_p((data), (base))
#define bpp_inb(base) inb(base)
reply other threads:[~2002-10-27 7:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021027071742.75385.qmail@web20002.mail.yahoo.com \
--to=theonetruekenny@yahoo.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.