From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Heatwole Subject: Re: [PATCH] cs46xx, independant rear PCM channel, IEC958 PCM channel Date: Tue, 29 Oct 2002 07:14:56 -0800 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20021029151456.GA776@porky> References: <3DBE3EDA.80900@cucumelo.org> Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Return-path: Content-Disposition: inline In-Reply-To: <3DBE3EDA.80900@cucumelo.org>; from gorm@cucumelo.org on Mon, Oct 28, 2002 at 23:55:06 -0800 Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Benny Sjostrand Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On 2002.10.28 23:55 Benny Sjostrand wrote: > I've got some reports that stuffs dont seems to work very well with > the Santa Cruz card, course for some unknown reason the driver dont > manage to raise GPIO 7 and 9 on the secondary codec that > enables the rear output, you probably will see the message > "cs46xx_setup_eapd_slot() Failure to write the GPIO pins for > slot 12. " and that will probably freeze you computer > for a while too. I should clarify that the freezing only happened while I was testing the driver by removing the GPIO write-complete check. This caused the function to be called multiple times in a row, which was what caused the temporary freeze. I've had no problems with freezing with the current driver. (So don't let that statement scare you.) ;-) -- Peter Heatwole "Murphy was just a well known pessimist." ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf