From: Dominik Brodowski <linux@brodo.de>
To: James Bottomley <James.Bottomley@steeleye.com>, torvalds@transmeta.com
Cc: linux-kernel@vger.kernel.org, cpufreq@www.linux.org.uk
Subject: [2.5. PATCH - UPDATED] cpufreq: update HyperThreading support in p4-clockmod.c driver
Date: Fri, 1 Nov 2002 19:20:53 +0100 [thread overview]
Message-ID: <20021101192053.A4212@brodo.de> (raw)
In-Reply-To: <200211011603.gA1G3Z503174@localhost.localdomain>; from James.Bottomley@steeleye.com on Fri, Nov 01, 2002 at 11:03:35AM -0500
[-- Attachment #1: Type: text/plain, Size: 4909 bytes --]
On Fri, Nov 01, 2002 at 11:03:35AM -0500, James Bottomley wrote:
> the #define for hyperthreading should be #ifdef CONFIG_X86_HT.
>
> Could you also make the symbol export conditional on this so that subarch's
> which don't have hyperthreading will still compile?
Sorry for that, updated patch below:
[2.5. PATCH] cpufreq: update HyperThreading support in p4-clockmod.c driver
This patch updates the p4-clockmod.c driver to correctly manage
HyperThreading-enabled Pentium IVs as well as those models which do
not support HyperThreading. Additionally, an EXPORT_SYMBOL was
missing. (spotted by Marc-Christian Petersen - thanks!)
Dominik
diff -ruN linux-2545original/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c linux/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
--- linux-2545original/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c Thu Oct 31 12:00:00 2002
+++ linux/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c Thu Oct 31 20:00:00 2002
@@ -50,7 +50,6 @@
MODULE_PARM(stock_freq, "i");
static struct cpufreq_driver *cpufreq_p4_driver;
-static unsigned int cpufreq_p4_old_state = 0;
static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
@@ -58,24 +57,50 @@
u32 l, h;
unsigned long cpus_allowed;
struct cpufreq_freqs freqs;
+ int hyperthreading;
+
if (!cpu_online(cpu) || (newstate > DC_DISABLE) ||
(newstate == DC_RESV))
return -EINVAL;
- cpu = cpu >> 1; /* physical CPU #nr */
+
+ /* switch to physical CPU where state is to be changed*/
+ cpus_allowed = current->cpus_allowed;
+
+ /* hyperthreading? */
+#ifdef CONFIG_X86_HT
+ hyperthreading = ((cpu_has_ht) && (smp_num_siblings == 2));
+#else
+ hyperthreading = 0;
+#endif
+ if (hyperthreading) {
+ unsigned int phys_cpu = cpu / 2;
+ set_cpus_allowed(current, 3 << (phys_cpu));
+ BUG_ON((cpu & ~1) != (smp_processor_id() & ~1));
+ cpu = phys_cpu * 2;
+ } else {
+ set_cpus_allowed(current, 1 << cpu);
+ BUG_ON(cpu != smp_processor_id());
+ }
+ /* get current state */
+ rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+ l = l >> 1;
+ l &= 0x7;
+
+ if (l == newstate) {
+ set_cpus_allowed(current, cpus_allowed);
+ return 0;
+ }
/* notifiers */
- freqs.old = stock_freq * cpufreq_p4_old_state / 8;
+ freqs.old = stock_freq * l / 8;
freqs.new = stock_freq * newstate / 8;
- freqs.cpu = 2*cpu;
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- freqs.cpu++;
+ freqs.cpu = cpu;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- /* switch to physical CPU where state is to be changed*/
- cpus_allowed = current->cpus_allowed;
- set_cpus_allowed(current, 3 << (2 * cpu));
- BUG_ON(cpu != (smp_processor_id() >> 1));
+ if (hyperthreading) {
+ freqs.cpu++;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
rdmsr(MSR_IA32_THERM_STATUS, l, h);
if (l & 0x01)
@@ -86,10 +111,10 @@
rdmsr(MSR_IA32_THERM_CONTROL, l, h);
if (newstate == DC_DISABLE) {
- printk(KERN_INFO PFX "CPU#%d,%d disabling modulation\n", cpu, (cpu + 1));
+ printk(KERN_INFO PFX "CPU#%d disabling modulation\n", cpu);
wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
} else {
- printk(KERN_INFO PFX "CPU#%d,%d setting duty cycle to %d%%\n", cpu, (cpu + 1), ((125 * newstate) / 10));
+ printk(KERN_INFO PFX "CPU#%d setting duty cycle to %d%%\n", cpu, ((125 * newstate) / 10));
/* bits 63 - 5 : reserved
* bit 4 : enable/disable
* bits 3-1 : duty cycle
@@ -104,9 +129,10 @@
/* notifiers */
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- freqs.cpu--;
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- cpufreq_p4_old_state = newstate;
+ if (hyperthreading) {
+ freqs.cpu--;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
return 0;
}
@@ -143,9 +169,9 @@
/* if (number_states == 1) */
{
if (policy->cpu == CPUFREQ_ALL_CPUS) {
- for (i=0; i<(NR_CPUS/2); i++)
- if (cpu_online(2*i))
- cpufreq_p4_setdc((2*i), newstate);
+ for (i=0; i<NR_CPUS; i++)
+ if (cpu_online(i))
+ cpufreq_p4_setdc(i, newstate);
} else {
cpufreq_p4_setdc(policy->cpu, newstate);
}
@@ -235,7 +261,6 @@
for (i=0;i<NR_CPUS;i++)
driver->cpu_cur_freq[i] = stock_freq;
#endif
- cpufreq_p4_old_state = DC_DISABLE;
driver->verify = &cpufreq_p4_verify;
driver->setpolicy = &cpufreq_p4_setpolicy;
diff -ruN linux-2545original/arch/i386/kernel/i386_ksyms.c linux/arch/i386/kernel/i386_ksyms.c
--- linux-2545original/arch/i386/kernel/i386_ksyms.c.original Thu Oct 31 12:00:00 2002
+++ linux/arch/i386/kernel/i386_ksyms.c Thu Oct 31 20:00:00 2002
@@ -145,6 +145,9 @@
#ifdef CONFIG_SMP
EXPORT_SYMBOL(cpu_data);
+#ifdef CONFIG_X86_HT
+EXPORT_SYMBOL(smp_num_siblings);
+#endif
EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(cpu_callout_map);
EXPORT_SYMBOL_NOVERS(__write_lock_failed);
[-- Attachment #2: Type: application/pgp-signature, Size: 240 bytes --]
next prev parent reply other threads:[~2002-11-01 18:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-01 16:03 [2.5. PATCH] cpufreq: update HyperThreading support in p4-clockmod.c driver James Bottomley
2002-11-01 18:20 ` Dominik Brodowski [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-11-01 18:41 [2.5. PATCH - UPDATED] " Pallipadi, Venkatesh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021101192053.A4212@brodo.de \
--to=linux@brodo.de \
--cc=James.Bottomley@steeleye.com \
--cc=cpufreq@www.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.