All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dominik Brodowski <linux@brodo.de>
To: torvalds@transmeta.com
Cc: linux-kernel@vger.kernel.org, cpufreq@www.linux.org.uk
Subject: [2.5. PATCH] cpufreq: update HyperThreading support in p4-clockmod.c driver
Date: Sun, 3 Nov 2002 13:16:29 +0100	[thread overview]
Message-ID: <20021103131629.A3058@brodo.de> (raw)

[-- Attachment #1: Type: text/plain, Size: 5152 bytes --]

[2.5. PATCH] cpufreq: update HyperThreading support in p4-clockmod.c driver

This patch updates the p4-clockmod.c driver to correctly manage
HyperThreading-enabled Pentium IVs as well as those models which do
not support HyperThreading - thanks to Venkatesh Pallipadi for
explaining cpu_sibling_map to me. Additionally, an EXPORT_SYMBOL 
was missing. (spotted by Marc-Christian Petersen - thanks!)

	 Dominik

diff -ruN linux-2545original/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c linux/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
--- linux-2545original/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c	Fri Nov  1 21:12:23 2002
+++ linux/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c	Sun Nov  3 12:30:34 2002
@@ -50,32 +50,55 @@
 MODULE_PARM(stock_freq, "i");
 
 static struct cpufreq_driver *cpufreq_p4_driver;
-static unsigned int cpufreq_p4_old_state = 0;
 
 
 static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 {
 	u32 l, h;
 	unsigned long cpus_allowed;
-	struct cpufreq_freqs    freqs;
+	struct cpufreq_freqs freqs;
+	int hyperthreading = 0;
+	int affected_cpu_map = 0;
+	int sibling = 0;
 
 	if (!cpu_online(cpu) || (newstate > DC_DISABLE) || 
 		(newstate == DC_RESV))
 		return -EINVAL;
-	cpu = cpu >> 1; /* physical CPU #nr */
+
+	/* switch to physical CPU where state is to be changed*/
+	cpus_allowed = current->cpus_allowed;
+
+	/* only run on CPU to be set, or on its sibling */
+	affected_cpu_map = 1 << cpu;
+#ifdef CONFIG_X86_HT
+	hyperthreading = ((cpu_has_ht) && (smp_num_siblings == 2));
+	if (hyperthreading) {
+		sibling = cpu_sibling_map[cpu];
+		affected_cpu_map |= (1 << sibling);
+	}
+#endif
+	set_cpus_allowed(current, affected_cpu_map);
+	BUG_ON(!(smp_processor_id() & affected_cpu_map));
+
+	/* get current state */
+	rdmsr(MSR_IA32_THERM_CONTROL, l, h);
+	l = l >> 1;
+	l &= 0x7;
+
+	if (l == newstate) {
+		set_cpus_allowed(current, cpus_allowed);
+		return 0;
+	}
 
 	/* notifiers */
-	freqs.old = stock_freq * cpufreq_p4_old_state / 8;
+	freqs.old = stock_freq * l / 8;
 	freqs.new = stock_freq * newstate / 8;
-	freqs.cpu = 2*cpu;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	freqs.cpu++;
+	freqs.cpu = cpu;
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* switch to physical CPU where state is to be changed*/
-	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, 3 << (2 * cpu));
-	BUG_ON(cpu != (smp_processor_id() >> 1));
+	if (hyperthreading) {
+		freqs.cpu = sibling;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
 
 	rdmsr(MSR_IA32_THERM_STATUS, l, h);
 	if (l & 0x01)
@@ -86,10 +109,10 @@
 
 	rdmsr(MSR_IA32_THERM_CONTROL, l, h);
 	if (newstate == DC_DISABLE) {
-		printk(KERN_INFO PFX "CPU#%d,%d disabling modulation\n", cpu, (cpu + 1));
+		printk(KERN_INFO PFX "CPU#%d disabling modulation\n", cpu);
 		wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
 	} else {
-		printk(KERN_INFO PFX "CPU#%d,%d setting duty cycle to %d%%\n", cpu, (cpu + 1), ((125 * newstate) / 10));
+		printk(KERN_INFO PFX "CPU#%d setting duty cycle to %d%%\n", cpu, ((125 * newstate) / 10));
 		/* bits 63 - 5	: reserved 
 		 * bit  4	: enable/disable
 		 * bits 3-1	: duty cycle
@@ -104,9 +127,10 @@
 
 	/* notifiers */
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	freqs.cpu--;
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	cpufreq_p4_old_state = newstate;
+	if (hyperthreading) {
+		freqs.cpu = cpu;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
 
 	return 0;
 }
@@ -123,7 +147,7 @@
 
 	if (policy->policy == CPUFREQ_POLICY_POWERSAVE)
 	{
-		for (i=8; i>0; i++)
+		for (i=8; i>0; i--)
 			if ((policy->min <= ((stock_freq / 8) * i)) &&
 			    (policy->max >= ((stock_freq / 8) * i))) 
 			{
@@ -131,7 +155,7 @@
 				number_states++;
 			}
 	} else {
-		for (i=0; i<=8; i--)
+		for (i=1; i<=8; i++)
 			if ((policy->min <= ((stock_freq / 8) * i)) &&
 			    (policy->max >= ((stock_freq / 8) * i))) 
 			{
@@ -143,9 +167,9 @@
 	/* if (number_states == 1) */
 	{
 		if (policy->cpu == CPUFREQ_ALL_CPUS) {
-			for (i=0; i<(NR_CPUS/2); i++)
-				if (cpu_online(2*i))
-					cpufreq_p4_setdc((2*i), newstate);
+			for (i=0; i<NR_CPUS; i++)
+				if (cpu_online(i))
+					cpufreq_p4_setdc(i, newstate);
 		} else {
 			cpufreq_p4_setdc(policy->cpu, newstate);
 		}
@@ -235,7 +259,6 @@
 	for (i=0;i<NR_CPUS;i++)
 		driver->cpu_cur_freq[i] = stock_freq;
 #endif
-	cpufreq_p4_old_state  = DC_DISABLE;
 
 	driver->verify        = &cpufreq_p4_verify;
 	driver->setpolicy     = &cpufreq_p4_setpolicy;
diff -ruN linux-2545original/arch/i386/kernel/i386_ksyms.c linux/arch/i386/kernel/i386_ksyms.c
--- linux-2545original/arch/i386/kernel/i386_ksyms.c	Fri Nov  1 21:12:23 2002
+++ linux/arch/i386/kernel/i386_ksyms.c	Fri Nov  1 21:08:44 2002
@@ -143,6 +143,11 @@
 EXPORT_SYMBOL(mmx_copy_page);
 #endif
 
+#ifdef CONFIG_X86_HT
+EXPORT_SYMBOL(smp_num_siblings);
+EXPORT_SYMBOL(cpu_sibling_map);
+#endif
+
 #ifdef CONFIG_SMP
 EXPORT_SYMBOL(cpu_data);
 EXPORT_SYMBOL(cpu_online_map);

[-- Attachment #2: Type: application/pgp-signature, Size: 240 bytes --]

             reply	other threads:[~2002-11-03 12:11 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-11-03 12:16 Dominik Brodowski [this message]
  -- strict thread matches above, loose matches on Subject: below --
2002-11-01 16:03 [2.5. PATCH] cpufreq: update HyperThreading support in p4-clockmod.c driver James Bottomley
2002-11-01  8:22 Dominik Brodowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20021103131629.A3058@brodo.de \
    --to=linux@brodo.de \
    --cc=cpufreq@www.linux.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@transmeta.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.