From: CaT <cat@zip.com.au>
To: Adam Belay <ambx1@neo.rr.com>,
greg@kroah.com, linux@brodo.de, Tamagucci@libero.it,
alan@lxorguk.ukuu.org.uk, linux-kernel@vger.kernel.org
Subject: Re: 2.5.45 / boottime oops (pnp bios I think)
Date: Tue, 5 Nov 2002 13:06:30 +1100 [thread overview]
Message-ID: <20021105020630.GA644@zip.com.au> (raw)
In-Reply-To: <20021104202800.GD316@neo.rr.com>
On Mon, Nov 04, 2002 at 08:28:00PM +0000, Adam Belay wrote:
> occured when the pnp bios protocol reached node 0x13. This node, pnp id
> PNP0f13, is of course a standard mouse port. If you look at the output of
> lspnp for my system, the following can be seen.
>
> 12 PNP0f13 input device: mouse
> flags: [no disable] [no config] [static]
> allocated resources:
> irq 12 [high edge]
Mine is #13 (ie the first line reads 13 PNP0f13...)
> Please feel free to send any questions or comments. The patch is below.
The patch lets me boot just fine. (Woo) One hassle though, doing
lspci -v 13 or cat /proc/bus/pnp/13 causes an oops. I presume it's the
same deal as what you were talking about?
general protection fault: 0040
e100
CPU: 0
EIP: 0088:[<0000992d>] Not tainted
EFLAGS: 00010046
EIP is at E Using_Versions+0x992c/0xc01188ff
eax: 00000040 ebx: 00009bd1 ecx: 00150000 edx: 00000005
esi: 0000c1b1 edi: 00000000 ebp: cc56dde8 esp: cc56dd98
ds: 0090 es: 00a0 ss: 0068
Process lspnp (pid: 539, threadinfo=cc56c000 task=cd51a160)
Stack: c1f60090 9bd10005 c1d03032 c1940003 0a110011 0018c157 c1449bcb 0000c130
c11b9bca 0000c109 00030000 dde80000 dddecc56 9bb2cc56 00000000 00180000
03010015 c7110000 cc56c000 00000000 cffea600 c015fa28 de60df00 0000cc56
Call Trace:
[<c015fa28>] proc_alloc_inode+0x10/0x4c
[<c0159ba3>] dio_get_page+0x4f/0x54
[<c0153917>] wake_up_inode+0xb/0x34
[<c0152f95>] unlock_new_inode+0x11/0x18
[<c015fc0f>] proc_get_inode+0x5f/0x124
[<c02737bc>] __pnp_bios_get_dev_node+0x120/0x17c
[<c0140000>] sync_blockdev+0x20/0x3c
[<c027382e>] pnp_bios_get_dev_node+0x16/0x34
[<c027543f>] proc_read_node+0x47/0x8c
[<c0161958>] proc_file_read+0xec/0x190
[<c013e571>] vfs_read+0xc1/0x158
[<c013eba2>] sys_read+0x2a/0x3c
[<c0106f0f>] syscall_call+0x7/0xb
Code: Bad EIP value.
<6>note: lspnp[539] exited with preempt_count 1
Warning: null TTY for (88:04) in tty_fasync
general protection fault: 0040
e100
CPU: 0
EIP: 0088:[<0000992d>] Not tainted
EFLAGS: 00010046
EIP is at E Using_Versions+0x992c/0xc01188ff
eax: 00000040 ebx: 00009bd1 ecx: 00150000 edx: 00000005
esi: 0000c1b1 edi: 00000000 ebp: c65efde8 esp: c65efd98
ds: 0090 es: 00a0 ss: 0068
Process cat (pid: 734, threadinfo=c65ee000 task=cbae81e0)
Stack: c1f60090 9bd10005 c1d03032 c1940003 0a110011 0018c157 c1449bcb 0000c130
c11b9bca 0000c109 00030000 fde80000 fddec65e 9bb2c65e 00000000 00180000
03010015 c7110000 c11efb68 c65efe88 40014a25 00000a25 fe60fb68 c012c65e
Call Trace:
[<c012c65e>] filemap_nopage+0x1ae/0x2bc
[<c013abcd>] do_page_cache_readahead+0x7d/0x150
[<c02737bc>] __pnp_bios_get_dev_node+0x120/0x17c
[<c0120000>] init_timers_cpu+0x0/0x88
[<c027382e>] pnp_bios_get_dev_node+0x16/0x34
[<c027543f>] proc_read_node+0x47/0x8c
[<c0161958>] proc_file_read+0xec/0x190
[<c013e571>] vfs_read+0xc1/0x158
[<c013eba2>] sys_read+0x2a/0x3c
[<c0106f0f>] syscall_call+0x7/0xb
Code: Bad EIP value.
<6>note: cat[734] exited with preempt_count 1
--
All people are equal,
But some are more equal then others.
- George W. Bush Jr, President of the United States
September 21, 2002 (Abridged version of security speech)
next prev parent reply other threads:[~2002-11-05 2:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-04 2:54 2.5.45 / boottime oops (pnp bios I think) CaT
2002-11-04 13:05 ` Alan Cox
2002-11-04 13:46 ` CaT
2002-11-04 14:21 ` Alan Cox
2002-11-07 14:33 ` David Woodhouse
2002-11-07 14:51 ` Dave Jones
2002-11-07 14:55 ` David Woodhouse
2002-11-07 15:46 ` Dave Jones
2002-11-07 15:50 ` David Woodhouse
2002-11-07 15:54 ` Brian Gerst
2002-11-04 16:15 ` Adam Belay
2002-11-04 23:54 ` CaT
2002-11-04 20:28 ` Adam Belay
2002-11-05 2:06 ` CaT [this message]
2002-11-04 21:24 ` Adam Belay
2002-11-05 2:29 ` CaT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021105020630.GA644@zip.com.au \
--to=cat@zip.com.au \
--cc=Tamagucci@libero.it \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=ambx1@neo.rr.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@brodo.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.