From: 于婧 <yuj@mail.ndsc.com.cn>
To: "linuxppc-embedded@lists.linuxppc.org"
<linuxppc-embedded@lists.linuxppc.org>
Subject: Re: RE: zynx zx212 dual-port ethernet card
Date: Tue, 26 Nov 2002 15:14:45 +0800 [thread overview]
Message-ID: <200211260711.BAA18681@lists.linuxppc.org> (raw)
hi!
I'm confused about your words.I noticed that
"#define request_8xxirq request_irq" in /include/asm-ppc/mpc8260.h ,so there should be no difference between request_irq()and request_8xxirq().Right?
I have no other PCI card at hand,so I didn't boot with other card.
>I am running a 4 port ZX214 on our mpc8265 board. The only change I had to
>make to the Tulip driver was to change request_irq() to request_8xxirq(). I
>am using a modified 2.18-pre3 kernel.
>
>Can you boot with any other PCI card?
>
>> -----Original Message-----
>> From: yuj@mail.ndsc.com.cn [mailto:yuj@mail.ndsc.com.cn]
>> Sent: Monday, November 25, 2002 7:43 PM
>> To: linuxppc-embedded@lists.linuxppc.org
>> Subject: zynx zx212 dual-port ethernet card
>>
>> I'm porting hardhat linux v2.1 on my motorola lopec mpc7410
>> board with a zynx zx212 dual-port ethernet card on it.The
>> problem is that the kernel can't start up with the ethernet
>> card on,while without it everything is perfect.Since zx212 is
>> compatible with 21143,I build the kernel with the "tulip"
>> option on.It should be no problem,but it happened.Can anybody
>> tell me the reason?
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡yuj@mail.ndsc.com.cn
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2002-11-26
>From bouncefilter@lists.linuxppc.org Tue Nov 26 02:14:56 2002
Received: from eins.siemens.at (eins.siemens.at [193.81.246.11])
by lists.linuxppc.org (8.9.3/8.9.3) with ESMTP id CAA18954
for <linuxppc-embedded@lists.linuxppc.org>; Tue, 26 Nov 2002 02:14:56 -0600
Received: from scesie13.sie.siemens.at (forix [10.1.140.2])
by eins.siemens.at with ESMTP id gAQ8EUU24599
for <linuxppc-embedded@lists.linuxppc.org>; Tue, 26 Nov 2002 09:14:30 +0100
Received: from vies194a.sie.siemens.at (atws15tc.sie.siemens.at [158.226.135.41])
by scesie13.sie.siemens.at (8.12.1/8.12.1) with ESMTP id gAQ8EQk1007317
for <linuxppc-embedded@lists.linuxppc.org>; Tue, 26 Nov 2002 09:14:26 +0100 (MET)
Received: by vies194a.sie.siemens.at with Internet Mail Service (5.5.2653.19)
id <X13A1D5K>; Tue, 26 Nov 2002 09:15:22 +0100
Message-ID: <4D50D5110555D5119F270800062B41650E921F@viee10pa.erd.siemens.at>
From: Grubmair Peter <peter.grubmair@siemens.com>
To: "'linuxppc-embedded post'" <linuxppc-embedded@lists.linuxppc.org>
Subject: Problem with ping at sash + console
Date: Tue, 26 Nov 2002 09:15:14 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: multipart/alternative;
boundary="----_=_NextPart_001_01C29523.F24E31C0"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C29523.F24E31C0
Content-Type: text/plain;
charset="iso-8859-1"
At a custom mpc850 board,
only ping -c 1 works,
normal ping does not work.
Ping ist started from a progam with "system()" call.
This program was started at sash on serial console.
Any suggestions ?
Best regards
Peter Grubmair
------_=_NextPart_001_01C29523.F24E31C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: base64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------_=_NextPart_001_01C29523.F24E31C0--
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
reply other threads:[~2002-11-26 7:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200211260711.BAA18681@lists.linuxppc.org \
--to=yuj@mail.ndsc.com.cn \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.