From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Tue, 10 Dec 2002 17:10:55 -0700 From: Matt Porter To: Prakash kanthi Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Board specific info for no EEPROM case Message-ID: <20021210171055.A32292@home.com> References: <20021206024109.S1931@mind.be> <20021210231853.23902.qmail@web41203.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20021210231853.23902.qmail@web41203.mail.yahoo.com>; from pkanthi@yahoo.com on Tue, Dec 10, 2002 at 03:18:53PM -0800 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Tue, Dec 10, 2002 at 03:18:53PM -0800, Prakash kanthi wrote: > > Hi Folks, > > I do not have a NVRAM or EEPROM on my board (PPC405 > based). I see that during the linux booting, it is > trying to read bd_t info from EEPROM and failing. Is > there an alternative to this problem? Can i hardcode > the stuff in decompress_kernel method and go ahead? There are a pile of examples of this very thing in arch/ppc/boot/simple/embed_config.c. Create an embed_config() and hardcode your board-specific values into the bd_t. Regards, -- Matt Porter porter@cox.net This is Linux Country. On a quiet night, you can hear Windows reboot. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/