All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ralf Hildebrandt <Ralf.Hildebrandt@charite.de>
To: lkml <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.4.21-pre1
Date: Wed, 11 Dec 2002 10:08:39 +0100	[thread overview]
Message-ID: <20021211090829.GD8741@charite.de> (raw)
In-Reply-To: <Pine.LNX.4.50L.0212101834240.23096-100000@freak.distro.conectiva>

* Marcelo Tosatti <marcelo@conectiva.com.br>:
 
> So here goes the first pre of 2.4.21 including the new IDE code merged
> from Alan's tree.
> 
> Test it carefully, since the new IDE code is not yet fully tested.

And, alas, I do have problems with exactly that code. Background:

I've been trying the -ac kernels for quite some time now, but on my
new Toshiba Satellite Pro 6100 they all fail miserably.

I made three screenshots which illuminate the problem:
http://www.stahl.bau.tu-bs.de/~hildeb/kernel/

* 2.4.20/2.4.19/2.4.20-ck1 all boot OK, the old IDE code detects my drives.
* 2.4.19-acX, 2.4.20-ac1 or 2.4.21-pre1 boot, but then fail to detect my drives.

My /etc/lilo.conf contains as addiditonal boot parameters only:

append="hdc=ide-scsi max_scsi_luns=1 video=vesa:ywrap,mtrr"

lspci reports:

00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go] (rev a3)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset Ethernet Controller (rev 42)
02:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support (rev 32)
02:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support (rev 32)
02:0d.0 System peripheral: Toshiba America Info Systems: Unknown device 0805 (rev 03)

-- 
Ralf Hildebrandt (Im Auftrag des Referat V a)   Ralf.Hildebrandt@charite.de
Charite Campus Mitte                            Tel.  +49 (0)30-450 570-155
Referat V a - Kommunikationsnetze -             Fax.  +49 (0)30-450 570-916
"Looking at the proliferation of personal web pages on the net, it
looks like very soon everyone on earth will have 15 Megabytes of fame." 
 -MG Siriam


  parent reply	other threads:[~2002-12-11  9:00 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-12-10 20:37 Linux 2.4.21-pre1 Marcelo Tosatti
2002-12-11  1:14 ` Adrian Bunk
2002-12-11  8:55 ` Matthias Andree
2002-12-11  9:20   ` Marc-Christian Petersen
2002-12-11  9:08 ` Ralf Hildebrandt [this message]
2002-12-11 16:07   ` Alan Cox
2002-12-11 15:34     ` Ralf Hildebrandt
2002-12-11 15:56       ` Ralf Hildebrandt
2002-12-11 17:29         ` Alan Cox
2002-12-15  9:56           ` Ralf Hildebrandt
2002-12-16  6:34             ` Alan Cox
2002-12-17  8:02   ` Ralf Hildebrandt
2002-12-11  9:37 ` Linux 2.4.21-pre1 compile failure: drivers/net/pcmcia/fmvj18x_cs.c Eyal Lebedinsky
2002-12-11 12:51   ` Adrian Bunk
2002-12-11 10:50 ` Linux 2.4.21-pre1 - unresolved symbols: scx200_gpio.o Eyal Lebedinsky
2002-12-12  1:35 ` Linux 2.4.21-pre1 IDE Erik Andersen
2002-12-12 13:10   ` Alan Cox
2002-12-13 14:23     ` Tomas Szepe
2002-12-13 17:42       ` Alan Cox
  -- strict thread matches above, loose matches on Subject: below --
2002-12-11  3:58 Linux 2.4.21-pre1 Alex Davis
2002-12-12 15:12 ` Adrian Bunk
2002-12-11 17:51 Petr Vandrovec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20021211090829.GD8741@charite.de \
    --to=ralf.hildebrandt@charite.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.