From: Art Haas <ahaas@airmail.net>
To: linux-kernel@vger.kernel.org
Cc: Linus Torvalds <torvalds@transmeta.com>
Subject: [PATCH] C99 initializers for drivers/scsi (2 of 4)
Date: Thu, 12 Dec 2002 08:06:47 -0600 [thread overview]
Message-ID: <20021212140647.GD1794@debian> (raw)
Hi.
Here are some more patches for converting drivers/scsi to use C99
initializers. The patches are all against 2.5.51.
Art Haas
--- linux-2.5.51/drivers/scsi/dc390.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/dc390.h 2002-12-10 14:28:33.000000000 -0600
@@ -52,41 +52,41 @@
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,30)
#define DC390_T { \
- proc_name: "tmscsim", \
- proc_info: DC390_proc_info, \
- name: DC390_BANNER " V" DC390_VERSION, \
- detect: DC390_detect, \
- release: DC390_release, \
- queuecommand: DC390_queue_command, \
- abort: DC390_abort, \
- reset: DC390_reset, \
- bios_param: DC390_bios_param, \
- can_queue: 42, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 16, \
- unchecked_isa_dma: 0, \
- use_clustering: DISABLE_CLUSTERING \
+ .proc_name = "tmscsim", \
+ .proc_info = DC390_proc_info, \
+ .name = DC390_BANNER " V" DC390_VERSION, \
+ .detect = DC390_detect, \
+ .release = DC390_release, \
+ .queuecommand = DC390_queue_command, \
+ .abort = DC390_abort, \
+ .reset = DC390_reset, \
+ .bios_param = DC390_bios_param, \
+ .can_queue = 42, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 16, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = DISABLE_CLUSTERING \
}
#else
extern struct proc_dir_entry DC390_proc_scsi_tmscsim;
#define DC390_T { \
- proc_dir: &DC390_proc_scsi_tmscsim, \
- proc_info: DC390_proc_info, \
- name: DC390_BANNER " V" DC390_VERSION, \
- detect: DC390_detect, \
- release: DC390_release, \
- queuecommand: DC390_queue_command, \
- abort: DC390_abort, \
- reset: DC390_reset, \
- bios_param: DC390_bios_param, \
- can_queue: 42, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 16, \
+ .proc_dir = &DC390_proc_scsi_tmscsim, \
+ .proc_info = DC390_proc_info, \
+ .name = DC390_BANNER " V" DC390_VERSION, \
+ .detect = DC390_detect, \
+ .release = DC390_release, \
+ .queuecommand = DC390_queue_command, \
+ .abort = DC390_abort, \
+ .reset = DC390_reset, \
+ .bios_param = DC390_bios_param, \
+ .can_queue = 42, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 16, \
NEW_EH \
- unchecked_isa_dma: 0, \
- use_clustering: DISABLE_CLUSTERING \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = DISABLE_CLUSTERING \
}
#endif
#endif /* defined(HOSTS_C) || defined(MODULE) */
--- linux-2.5.51/drivers/scsi/dec_esp.h.old 2002-07-05 18:42:05.000000000 -0500
+++ linux-2.5.51/drivers/scsi/dec_esp.h 2002-12-10 14:28:33.000000000 -0600
@@ -27,19 +27,19 @@
int hostno, int inout);
#define SCSI_DEC_ESP { \
- proc_name: "esp", \
- proc_info: &esp_proc_info, \
- name: "NCR53C94", \
- detect: dec_esp_detect, \
- info: esp_info, \
- command: esp_command, \
- queuecommand: esp_queue, \
- abort: esp_abort, \
- reset: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING, }
+ .proc_name = "esp", \
+ .proc_info = &esp_proc_info, \
+ .name = "NCR53C94", \
+ .detect = dec_esp_detect, \
+ .info = esp_info, \
+ .command = esp_command, \
+ .queuecommand = esp_queue, \
+ .abort = esp_abort, \
+ .reset = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING, }
#endif /* DEC_ESP_H */
--- linux-2.5.51/drivers/scsi/dmx3191d.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/dmx3191d.h 2002-12-10 14:28:34.000000000 -0600
@@ -32,22 +32,22 @@
#define DMX3191D { \
- proc_info: dmx3191d_proc_info, \
- name: "Domex DMX3191D", \
- detect: dmx3191d_detect, \
- release: dmx3191d_release_resources, \
- info: dmx3191d_info, \
- queuecommand: dmx3191d_queue_command, \
- eh_abort_handler: dmx3191d_abort, \
- eh_bus_reset_handler: dmx3191d_bus_reset, \
- eh_device_reset_handler:dmx3191d_device_reset, \
- eh_host_reset_handler: dmx3191d_host_reset, \
- bios_param: NULL, \
- can_queue: 32, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 2, \
- use_clustering: DISABLE_CLUSTERING \
+ .proc_info = dmx3191d_proc_info, \
+ .name = "Domex DMX3191D", \
+ .detect = dmx3191d_detect, \
+ .release = dmx3191d_release_resources, \
+ .info = dmx3191d_info, \
+ .queuecommand = dmx3191d_queue_command, \
+ .eh_abort_handler = dmx3191d_abort, \
+ .eh_bus_reset_handler = dmx3191d_bus_reset, \
+ .eh_device_reset_handler = dmx3191d_device_reset, \
+ .eh_host_reset_handler = dmx3191d_host_reset, \
+ .bios_param = NULL, \
+ .can_queue = 32, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 2, \
+ .use_clustering = DISABLE_CLUSTERING \
}
--- linux-2.5.51/drivers/scsi/dpti.h.old 2002-11-29 09:24:17.000000000 -0600
+++ linux-2.5.51/drivers/scsi/dpti.h 2002-12-10 14:28:32.000000000 -0600
@@ -62,44 +62,44 @@
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,00)
#define DPT_I2O { \
- proc_info: adpt_proc_info, \
- detect: adpt_detect, \
- release: adpt_release, \
- info: adpt_info, \
- queuecommand: adpt_queue, \
- eh_abort_handler: adpt_abort, \
- eh_device_reset_handler: adpt_device_reset, \
- eh_bus_reset_handler: adpt_bus_reset, \
- eh_host_reset_handler: adpt_reset, \
- bios_param: adpt_bios_param, \
- can_queue: MAX_TO_IOP_MESSAGES ,/* max simultaneous cmds */\
- this_id: 7, /* scsi id of host adapter */\
- sg_tablesize: 0, /* max scatter-gather cmds */\
- cmd_per_lun: 256, /* cmds per lun (linked cmds) */\
- use_clustering: ENABLE_CLUSTERING, \
- use_new_eh_code: 1 \
+ .proc_info = adpt_proc_info, \
+ .detect = adpt_detect, \
+ .release = adpt_release, \
+ .info = adpt_info, \
+ .queuecommand = adpt_queue, \
+ .eh_abort_handler = adpt_abort, \
+ .eh_device_reset_handler = adpt_device_reset, \
+ .eh_bus_reset_handler = adpt_bus_reset, \
+ .eh_host_reset_handler = adpt_reset, \
+ .bios_param = adpt_bios_param, \
+ .can_queue = MAX_TO_IOP_MESSAGES ,/* max simultaneous cmds */\
+ .this_id = 7, /* scsi id of host adapter */\
+ .sg_tablesize = 0, /* max scatter-gather cmds */\
+ .cmd_per_lun = 256, /* cmds per lun (linked cmds) */\
+ .use_clustering = ENABLE_CLUSTERING, \
+ .use_new_eh_code = 1 \
}
#else /* KERNEL_VERSION > 2.2.16 */
#define DPT_I2O { \
- proc_info: adpt_proc_info, \
- detect: adpt_detect, \
- release: adpt_release, \
- info: adpt_info, \
- queuecommand: adpt_queue, \
- eh_abort_handler: adpt_abort, \
- eh_device_reset_handler: adpt_device_reset, \
- eh_bus_reset_handler: adpt_bus_reset, \
- eh_host_reset_handler: adpt_reset, \
- bios_param: adpt_bios_param, \
- slave_configure: adpt_slave_configure, \
- can_queue: MAX_TO_IOP_MESSAGES, /* max simultaneous cmds */\
- this_id: 7, /* scsi id of host adapter */\
- sg_tablesize: 0, /* max scatter-gather cmds */\
- cmd_per_lun: 1, /* cmds per lun (linked cmds) */\
- use_clustering: ENABLE_CLUSTERING, \
- proc_name: "dpt_i2o" /* this is the name of our proc node*/ \
+ .proc_info = adpt_proc_info, \
+ .detect = adpt_detect, \
+ .release = adpt_release, \
+ .info = adpt_info, \
+ .queuecommand = adpt_queue, \
+ .eh_abort_handler = adpt_abort, \
+ .eh_device_reset_handler = adpt_device_reset, \
+ .eh_bus_reset_handler = adpt_bus_reset, \
+ .eh_host_reset_handler = adpt_reset, \
+ .bios_param = adpt_bios_param, \
+ .slave_configure = adpt_slave_configure, \
+ .can_queue = MAX_TO_IOP_MESSAGES, /* max simultaneous cmds */\
+ .this_id = 7, /* scsi id of host adapter */\
+ .sg_tablesize = 0, /* max scatter-gather cmds */\
+ .cmd_per_lun = 1, /* cmds per lun (linked cmds) */\
+ .use_clustering = ENABLE_CLUSTERING, \
+ .proc_name = "dpt_i2o" /* this is the name of our proc node*/ \
}
#endif
--- linux-2.5.51/drivers/scsi/dtc.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/dtc.h 2002-12-10 14:28:33.000000000 -0600
@@ -54,19 +54,19 @@
*/
#define DTC3x80 { \
- name: "DTC 3180/3280 ", \
- detect: dtc_detect, \
- queuecommand: dtc_queue_command, \
- eh_abort_handler: dtc_abort, \
- eh_bus_reset_handler: dtc_bus_reset, \
- eh_device_reset_handler: dtc_device_reset, \
- eh_host_reset_handler: dtc_host_reset, \
- bios_param: dtc_biosparam, \
- can_queue: CAN_QUEUE, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: CMD_PER_LUN , \
- use_clustering: DISABLE_CLUSTERING}
+ .name = "DTC 3180/3280 ", \
+ .detect = dtc_detect, \
+ .queuecommand = dtc_queue_command, \
+ .eh_abort_handler = dtc_abort, \
+ .eh_bus_reset_handler = dtc_bus_reset, \
+ .eh_device_reset_handler = dtc_device_reset, \
+ .eh_host_reset_handler = dtc_host_reset, \
+ .bios_param = dtc_biosparam, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN , \
+ .use_clustering = DISABLE_CLUSTERING}
#define NCR5380_implementation_fields \
unsigned int base
--- linux-2.5.51/drivers/scsi/eata.h.old 2002-11-29 09:24:17.000000000 -0600
+++ linux-2.5.51/drivers/scsi/eata.h 2002-12-10 14:28:33.000000000 -0600
@@ -14,17 +14,17 @@
#define EATA_VERSION "8.00.00"
#define EATA { \
- name: "EATA/DMA 2.0x rev. " EATA_VERSION " ", \
- detect: eata2x_detect, \
- release: eata2x_release, \
- queuecommand: eata2x_queuecommand, \
- eh_abort_handler: eata2x_eh_abort, \
- eh_device_reset_handler: NULL, \
- eh_bus_reset_handler: NULL, \
- eh_host_reset_handler: eata2x_eh_host_reset, \
- bios_param: eata2x_bios_param, \
- slave_configure: eata2x_slave_configure, \
- this_id: 7, \
- unchecked_isa_dma: 1, \
- use_clustering: ENABLE_CLUSTERING \
+ .name = "EATA/DMA 2.0x rev. " EATA_VERSION " ", \
+ .detect = eata2x_detect, \
+ .release = eata2x_release, \
+ .queuecommand = eata2x_queuecommand, \
+ .eh_abort_handler = eata2x_eh_abort, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = NULL, \
+ .eh_host_reset_handler = eata2x_eh_host_reset, \
+ .bios_param = eata2x_bios_param, \
+ .slave_configure = eata2x_slave_configure, \
+ .this_id = 7, \
+ .unchecked_isa_dma = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
}
--- linux-2.5.51/drivers/scsi/eata_dma.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/eata_dma.h 2002-12-10 14:28:35.000000000 -0600
@@ -81,15 +81,15 @@
#include <scsi/scsicam.h>
#define EATA_DMA { \
- proc_info: eata_proc_info, /* procinfo */ \
- name: "EATA (Extended Attachment) HBA driver", \
- detect: eata_detect, \
- release: eata_release, \
- queuecommand: eata_queue, \
- abort: eata_abort, \
- reset: eata_reset, \
- unchecked_isa_dma: 1, /* True if ISA */ \
- use_clustering: ENABLE_CLUSTERING }
+ .proc_info = eata_proc_info, /* procinfo */ \
+ .name = "EATA (Extended Attachment) HBA driver", \
+ .detect = eata_detect, \
+ .release = eata_release, \
+ .queuecommand = eata_queue, \
+ .abort = eata_abort, \
+ .reset = eata_reset, \
+ .unchecked_isa_dma = 1, /* True if ISA */ \
+ .use_clustering = ENABLE_CLUSTERING }
#endif /* _EATA_DMA_H */
--- linux-2.5.51/drivers/scsi/eata_pio.h.old 2002-11-11 07:14:45.000000000 -0600
+++ linux-2.5.51/drivers/scsi/eata_pio.h 2002-12-10 14:28:35.000000000 -0600
@@ -65,14 +65,14 @@
static int eata_pio_release(struct Scsi_Host *);
#define EATA_PIO { \
- proc_info: eata_pio_proc_info, /* procinfo */ \
- name: "EATA (Extended Attachment) PIO driver",\
- detect: eata_pio_detect, \
- release: eata_pio_release, \
- queuecommand: eata_pio_queue, \
- eh_abort_handler: eata_pio_abort, \
- eh_host_reset_handler: eata_pio_host_reset, \
- use_clustering: ENABLE_CLUSTERING \
+ .proc_info = eata_pio_proc_info, /* procinfo */ \
+ .name = "EATA (Extended Attachment) PIO driver",\
+ .detect = eata_pio_detect, \
+ .release = eata_pio_release, \
+ .queuecommand = eata_pio_queue, \
+ .eh_abort_handler = eata_pio_abort, \
+ .eh_host_reset_handler = eata_pio_host_reset, \
+ .use_clustering = ENABLE_CLUSTERING \
}
#endif /* _EATA_PIO_H */
--- linux-2.5.51/drivers/scsi/fastlane.h.old 2002-07-05 18:42:03.000000000 -0500
+++ linux-2.5.51/drivers/scsi/fastlane.h 2002-12-10 14:28:32.000000000 -0600
@@ -48,18 +48,18 @@
extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
int hostno, int inout);
-#define SCSI_FASTLANE { proc_name: "esp-fastlane", \
- proc_info: esp_proc_info, \
- name: "Fastlane SCSI", \
- detect: fastlane_esp_detect, \
- release: fastlane_esp_release, \
- queuecommand: esp_queue, \
- abort: esp_abort, \
- reset: esp_reset, \
- can_queue: 7, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define SCSI_FASTLANE { .proc_name = "esp-fastlane", \
+ .proc_info = esp_proc_info, \
+ .name = "Fastlane SCSI", \
+ .detect = fastlane_esp_detect, \
+ .release = fastlane_esp_release, \
+ .queuecommand = esp_queue, \
+ .abort = esp_abort, \
+ .reset = esp_reset, \
+ .can_queue = 7, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING }
#endif /* FASTLANE_H */
--- linux-2.5.51/drivers/scsi/fcal.h.old 2002-11-29 09:24:18.000000000 -0600
+++ linux-2.5.51/drivers/scsi/fcal.h 2002-12-10 14:28:32.000000000 -0600
@@ -26,21 +26,21 @@
int fcal_slave_configure(Scsi_Device *);
#define FCAL { \
- name: "Fibre Channel Arbitrated Loop",\
- detect: fcal_detect, \
- release: fcal_release, \
- proc_info: fcal_proc_info, \
- queuecommand: fcp_scsi_queuecommand, \
- slave_configure: fcal_slave_configure, \
- can_queue: FCAL_CAN_QUEUE, \
- this_id: -1, \
- sg_tablesize: 1, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING, \
- eh_abort_handler: fcp_scsi_abort, \
- eh_device_reset_handler:fcp_scsi_dev_reset, \
- eh_bus_reset_handler: fcp_scsi_bus_reset, \
- eh_host_reset_handler: fcp_scsi_host_reset, \
+ .name = "Fibre Channel Arbitrated Loop",\
+ .detect = fcal_detect, \
+ .release = fcal_release, \
+ .proc_info = fcal_proc_info, \
+ .queuecommand = fcp_scsi_queuecommand, \
+ .slave_configure = fcal_slave_configure, \
+ .can_queue = FCAL_CAN_QUEUE, \
+ .this_id = -1, \
+ .sg_tablesize = 1, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING, \
+ .eh_abort_handler = fcp_scsi_abort, \
+ .eh_device_reset_handler = fcp_scsi_dev_reset, \
+ .eh_bus_reset_handler = fcp_scsi_bus_reset, \
+ .eh_host_reset_handler = fcp_scsi_host_reset, \
}
#endif /* !(_FCAL_H) */
--- linux-2.5.51/drivers/scsi/fd_mcs.h.old 2002-11-11 07:14:46.000000000 -0600
+++ linux-2.5.51/drivers/scsi/fd_mcs.h 2002-12-10 14:28:33.000000000 -0600
@@ -36,23 +36,23 @@
static const char *fd_mcs_info(struct Scsi_Host *);
#define FD_MCS {\
- proc_name: "fd_mcs", \
- proc_info: fd_mcs_proc_info, \
- detect: fd_mcs_detect, \
- release: fd_mcs_release, \
- info: fd_mcs_info, \
- command: fd_mcs_command, \
- queuecommand: fd_mcs_queue, \
- eh_abort_handler: fd_mcs_abort, \
- eh_bus_reset_handler: fd_mcs_bus_reset, \
- eh_host_reset_handler: fd_mcs_host_reset, \
- eh_device_reset_handler: fd_mcs_device_reset, \
- bios_param: fd_mcs_biosparam, \
- can_queue: 1, \
- this_id: 7, \
- sg_tablesize: 64, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING \
+ .proc_name = "fd_mcs", \
+ .proc_info = fd_mcs_proc_info, \
+ .detect = fd_mcs_detect, \
+ .release = fd_mcs_release, \
+ .info = fd_mcs_info, \
+ .command = fd_mcs_command, \
+ .queuecommand = fd_mcs_queue, \
+ .eh_abort_handler = fd_mcs_abort, \
+ .eh_bus_reset_handler = fd_mcs_bus_reset, \
+ .eh_host_reset_handler = fd_mcs_host_reset, \
+ .eh_device_reset_handler = fd_mcs_device_reset, \
+ .bios_param = fd_mcs_biosparam, \
+ .can_queue = 1, \
+ .this_id = 7, \
+ .sg_tablesize = 64, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING \
}
#endif /* _FD_MCS_H */
--- linux-2.5.51/drivers/scsi/fdomain.h.old 2002-10-31 16:20:04.000000000 -0600
+++ linux-2.5.51/drivers/scsi/fdomain.h 2002-12-10 14:28:33.000000000 -0600
@@ -39,21 +39,21 @@
int length, int hostno, int inout );
static int fdomain_16x0_release(struct Scsi_Host *shpnt);
-#define FDOMAIN_16X0 { proc_info: fdomain_16x0_proc_info, \
- detect: fdomain_16x0_detect, \
- info: fdomain_16x0_info, \
- command: fdomain_16x0_command, \
- queuecommand: fdomain_16x0_queue, \
- eh_abort_handler: fdomain_16x0_abort, \
- eh_bus_reset_handler: fdomain_16x0_bus_reset, \
- eh_device_reset_handler: fdomain_16x0_device_reset, \
- eh_host_reset_handler: fdomain_16x0_host_reset, \
- bios_param: fdomain_16x0_biosparam, \
- release: fdomain_16x0_release, \
- can_queue: 1, \
- this_id: 6, \
- sg_tablesize: 64, \
- cmd_per_lun: 1, \
- use_clustering: DISABLE_CLUSTERING \
+#define FDOMAIN_16X0 { .proc_info = fdomain_16x0_proc_info, \
+ .detect = fdomain_16x0_detect, \
+ .info = fdomain_16x0_info, \
+ .command = fdomain_16x0_command, \
+ .queuecommand = fdomain_16x0_queue, \
+ .eh_abort_handler = fdomain_16x0_abort, \
+ .eh_bus_reset_handler = fdomain_16x0_bus_reset, \
+ .eh_device_reset_handler = fdomain_16x0_device_reset, \
+ .eh_host_reset_handler = fdomain_16x0_host_reset, \
+ .bios_param = fdomain_16x0_biosparam, \
+ .release = fdomain_16x0_release, \
+ .can_queue = 1, \
+ .this_id = 6, \
+ .sg_tablesize = 64, \
+ .cmd_per_lun = 1, \
+ .use_clustering = DISABLE_CLUSTERING \
}
#endif
--- linux-2.5.51/drivers/scsi/g_NCR5380.h.old 2002-11-11 07:14:46.000000000 -0600
+++ linux-2.5.51/drivers/scsi/g_NCR5380.h 2002-12-10 14:28:32.000000000 -0600
@@ -66,22 +66,22 @@
#endif
#define GENERIC_NCR5380 { \
- proc_info: generic_NCR5380_proc_info, \
- name: "Generic NCR5380/NCR53C400 Scsi Driver", \
- detect: generic_NCR5380_detect, \
- release: generic_NCR5380_release_resources, \
- info: (void *)generic_NCR5380_info, \
- queuecommand: generic_NCR5380_queue_command, \
- eh_abort_handler:generic_NCR5380_abort, \
- eh_bus_reset_handler:generic_NCR5380_bus_reset, \
- eh_device_reset_handler:generic_NCR5380_device_reset, \
- eh_host_reset_handler:generic_NCR5380_host_reset, \
- bios_param: NCR5380_BIOSPARAM, \
- can_queue: CAN_QUEUE, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: CMD_PER_LUN , \
- use_clustering: DISABLE_CLUSTERING}
+ .proc_info = generic_NCR5380_proc_info, \
+ .name = "Generic NCR5380/NCR53C400 Scsi Driver", \
+ .detect = generic_NCR5380_detect, \
+ .release = generic_NCR5380_release_resources, \
+ .info = (void *)generic_NCR5380_info, \
+ .queuecommand = generic_NCR5380_queue_command, \
+ .eh_abort_handler = generic_NCR5380_abort, \
+ .eh_bus_reset_handler = generic_NCR5380_bus_reset, \
+ .eh_device_reset_handler = generic_NCR5380_device_reset, \
+ .eh_host_reset_handler = generic_NCR5380_host_reset, \
+ .bios_param = NCR5380_BIOSPARAM, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN , \
+ .use_clustering = DISABLE_CLUSTERING}
#ifndef HOSTS_C
--- linux-2.5.51/drivers/scsi/gdth.h.old 2002-10-31 16:20:05.000000000 -0600
+++ linux-2.5.51/drivers/scsi/gdth.h 2002-12-10 14:28:33.000000000 -0600
@@ -1037,28 +1037,28 @@
int gdth_eh_device_reset(Scsi_Cmnd *scp);
int gdth_eh_bus_reset(Scsi_Cmnd *scp);
int gdth_eh_host_reset(Scsi_Cmnd *scp);
-#define GDTH { proc_name: "gdth", \
- proc_info: gdth_proc_info, \
- name: "GDT SCSI Disk Array Controller",\
- detect: gdth_detect, \
- release: gdth_release, \
- info: gdth_info, \
- command: NULL, \
- queuecommand: gdth_queuecommand, \
- eh_abort_handler: gdth_eh_abort, \
- eh_device_reset_handler: gdth_eh_device_reset, \
- eh_bus_reset_handler: gdth_eh_bus_reset, \
- eh_host_reset_handler: gdth_eh_host_reset, \
- abort: gdth_abort, \
- reset: gdth_reset, \
- bios_param: gdth_bios_param, \
- can_queue: GDTH_MAXCMDS, \
- this_id: -1, \
- sg_tablesize: GDTH_MAXSG, \
- cmd_per_lun: GDTH_MAXC_P_L, \
- present: 0, \
- unchecked_isa_dma: 1, \
- use_clustering: ENABLE_CLUSTERING }
+#define GDTH { .proc_name = "gdth", \
+ .proc_info = gdth_proc_info, \
+ .name = "GDT SCSI Disk Array Controller",\
+ .detect = gdth_detect, \
+ .release = gdth_release, \
+ .info = gdth_info, \
+ .command = NULL, \
+ .queuecommand = gdth_queuecommand, \
+ .eh_abort_handler = gdth_eh_abort, \
+ .eh_device_reset_handler = gdth_eh_device_reset, \
+ .eh_bus_reset_handler = gdth_eh_bus_reset, \
+ .eh_host_reset_handler = gdth_eh_host_reset, \
+ .abort = gdth_abort, \
+ .reset = gdth_reset, \
+ .bios_param = gdth_bios_param, \
+ .can_queue = GDTH_MAXCMDS, \
+ .this_id = -1, \
+ .sg_tablesize = GDTH_MAXSG, \
+ .cmd_per_lun = GDTH_MAXC_P_L, \
+ .present = 0, \
+ .unchecked_isa_dma = 1, \
+ .use_clustering = ENABLE_CLUSTERING }
#endif
--- linux-2.5.51/drivers/scsi/gvp11.h.old 2002-07-05 18:42:33.000000000 -0500
+++ linux-2.5.51/drivers/scsi/gvp11.h 2002-12-10 14:28:34.000000000 -0600
@@ -32,18 +32,18 @@
#ifdef HOSTS_C
-#define GVP11_SCSI { proc_name: "GVP11", \
- name: "GVP Series II SCSI", \
- detect: gvp11_detect, \
- release: gvp11_release, \
- queuecommand: wd33c93_queuecommand, \
- abort: wd33c93_abort, \
- reset: wd33c93_reset, \
- can_queue: CAN_QUEUE, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: CMD_PER_LUN, \
- use_clustering: DISABLE_CLUSTERING }
+#define GVP11_SCSI { .proc_name = "GVP11", \
+ .name = "GVP Series II SCSI", \
+ .detect = gvp11_detect, \
+ .release = gvp11_release, \
+ .queuecommand = wd33c93_queuecommand, \
+ .abort = wd33c93_abort, \
+ .reset = wd33c93_reset, \
+ .can_queue = CAN_QUEUE, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = CMD_PER_LUN, \
+ .use_clustering = DISABLE_CLUSTERING }
#else
/*
--- linux-2.5.51/drivers/scsi/ibmmca.h.old 2002-11-18 01:02:09.000000000 -0600
+++ linux-2.5.51/drivers/scsi/ibmmca.h 2002-12-10 14:28:33.000000000 -0600
@@ -27,22 +27,22 @@
* about this, but it will break things in the future.
*/
#define IBMMCA { \
- proc_name: "ibmmca", /*proc_name*/ \
- proc_info: ibmmca_proc_info, /*proc info fn*/ \
- name: "IBM SCSI-Subsystem", /*name*/ \
- detect: ibmmca_detect, /*detect fn*/ \
- release: ibmmca_release, /*release fn*/ \
- command: ibmmca_command, /*command fn*/ \
- queuecommand: ibmmca_queuecommand, /*queuecommand fn*/ \
- eh_abort_handler:ibmmca_abort, /*abort fn*/ \
- eh_host_reset_handler:ibmmca_host_reset, /*reset fn*/ \
- bios_param: ibmmca_biosparam, /*bios fn*/ \
- can_queue: 16, /*can_queue*/ \
- this_id: 7, /*set by detect*/ \
- sg_tablesize: 16, /*sg_tablesize*/ \
- cmd_per_lun: 1, /*cmd_per_lun*/ \
- unchecked_isa_dma: 0, /*32-Bit Busmaster */ \
- use_clustering: ENABLE_CLUSTERING /*use_clustering*/ \
+ .proc_name = "ibmmca", /*proc_name*/ \
+ .proc_info = ibmmca_proc_info, /*proc info fn*/ \
+ .name = "IBM SCSI-Subsystem", /*name*/ \
+ .detect = ibmmca_detect, /*detect fn*/ \
+ .release = ibmmca_release, /*release fn*/ \
+ .command = ibmmca_command, /*command fn*/ \
+ .queuecommand = ibmmca_queuecommand, /*queuecommand fn*/ \
+ .eh_abort_handler = ibmmca_abort, /*abort fn*/ \
+ .eh_host_reset_handler = ibmmca_host_reset, /*reset fn*/ \
+ .bios_param = ibmmca_biosparam, /*bios fn*/ \
+ .can_queue = 16, /*can_queue*/ \
+ .this_id = 7, /*set by detect*/ \
+ .sg_tablesize = 16, /*sg_tablesize*/ \
+ .cmd_per_lun = 1, /*cmd_per_lun*/ \
+ .unchecked_isa_dma = 0, /*32-Bit Busmaster */ \
+ .use_clustering = ENABLE_CLUSTERING /*use_clustering*/ \
}
#endif /* _IBMMCA_H */
--- linux-2.5.51/drivers/scsi/imm.h.old 2002-10-31 16:20:05.000000000 -0600
+++ linux-2.5.51/drivers/scsi/imm.h 2002-12-10 14:28:32.000000000 -0600
@@ -163,21 +163,21 @@
int imm_biosparam(struct scsi_device *, struct block_device *,
sector_t, int *);
-#define IMM { proc_name: "imm", \
- proc_info: imm_proc_info, \
- name: "Iomega VPI2 (imm) interface",\
- detect: imm_detect, \
- release: imm_release, \
- command: imm_command, \
- queuecommand: imm_queuecommand, \
- eh_abort_handler: imm_abort, \
- eh_device_reset_handler: NULL, \
- eh_bus_reset_handler: imm_reset, \
- eh_host_reset_handler: imm_reset, \
- bios_param: imm_biosparam, \
- this_id: 7, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- use_clustering: ENABLE_CLUSTERING \
+#define IMM { .proc_name = "imm", \
+ .proc_info = imm_proc_info, \
+ .name = "Iomega VPI2 (imm) interface",\
+ .detect = imm_detect, \
+ .release = imm_release, \
+ .command = imm_command, \
+ .queuecommand = imm_queuecommand, \
+ .eh_abort_handler = imm_abort, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = imm_reset, \
+ .eh_host_reset_handler = imm_reset, \
+ .bios_param = imm_biosparam, \
+ .this_id = 7, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .use_clustering = ENABLE_CLUSTERING \
}
#endif /* _IMM_H */
--- linux-2.5.51/drivers/scsi/in2000.h.old 2002-10-31 16:20:05.000000000 -0600
+++ linux-2.5.51/drivers/scsi/in2000.h 2002-12-10 14:28:32.000000000 -0600
@@ -414,22 +414,22 @@
#define IN2000_CPL 2
#define IN2000_HOST_ID 7
-#define IN2000 { proc_name: "in2000", /* name of /proc/scsi directory entry */ \
- proc_info: in2000_proc_info, /* pointer to proc info function */ \
- name: "Always IN2000", /* device name */ \
- detect: in2000_detect, /* returns number of in2000's found */ \
- release: in2000_release, /* release the in2000 controller */ \
- queuecommand: in2000_queuecommand, /* queue scsi command, don't wait */ \
- eh_abort_handler: in2000_abort, /* abort current command */ \
- eh_bus_reset_handler: in2000_bus_reset, /* reset scsi bus */ \
- eh_device_reset_handler: in2000_device_reset, /* reset scsi device */ \
- eh_host_reset_handler: in2000_host_reset, /* reset scsi hba */ \
- bios_param: in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \
- can_queue: IN2000_CAN_Q, /* max commands we can queue up */ \
- this_id: IN2000_HOST_ID, /* host-adapter scsi id */ \
- sg_tablesize: IN2000_SG, /* scatter-gather table size */ \
- cmd_per_lun: IN2000_CPL, /* commands per lun */ \
- use_clustering: DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \
+#define IN2000 { .proc_name = "in2000", /* name of /proc/scsi directory entry */ \
+ .proc_info = in2000_proc_info, /* pointer to proc info function */ \
+ .name = "Always IN2000", /* device name */ \
+ .detect = in2000_detect, /* returns number of in2000's found */ \
+ .release = in2000_release, /* release the in2000 controller */ \
+ .queuecommand = in2000_queuecommand, /* queue scsi command, don't wait */ \
+ .eh_abort_handler = in2000_abort, /* abort current command */ \
+ .eh_bus_reset_handler = in2000_bus_reset, /* reset scsi bus */ \
+ .eh_device_reset_handler = in2000_device_reset, /* reset scsi device */ \
+ .eh_host_reset_handler = in2000_host_reset, /* reset scsi hba */ \
+ .bios_param = in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \
+ .can_queue = IN2000_CAN_Q, /* max commands we can queue up */ \
+ .this_id = IN2000_HOST_ID, /* host-adapter scsi id */ \
+ .sg_tablesize = IN2000_SG, /* scatter-gather table size */ \
+ .cmd_per_lun = IN2000_CPL, /* commands per lun */ \
+ .use_clustering = DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \
}
#endif /* IN2000_H */
--- linux-2.5.51/drivers/scsi/ini9100u.h.old 2002-11-29 09:24:18.000000000 -0600
+++ linux-2.5.51/drivers/scsi/ini9100u.h 2002-12-10 14:28:34.000000000 -0600
@@ -88,31 +88,31 @@
#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.03g"
#define INI9100U { \
- next: NULL, \
- module: NULL, \
- proc_name: "INI9100U", \
- proc_info: NULL, \
- name: i91u_REVID, \
- detect: i91u_detect, \
- release: i91u_release, \
- info: NULL, \
- command: i91u_command, \
- queuecommand: i91u_queue, \
- eh_strategy_handler: NULL, \
- eh_abort_handler: NULL, \
- eh_device_reset_handler: NULL, \
- eh_bus_reset_handler: NULL, \
- eh_host_reset_handler: NULL, \
- abort: i91u_abort, \
- reset: i91u_reset, \
- bios_param: i91u_biosparam, \
- can_queue: 1, \
- this_id: 1, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- present: 0, \
- unchecked_isa_dma: 0, \
- use_clustering: ENABLE_CLUSTERING, \
+ .next = NULL, \
+ .module = NULL, \
+ .proc_name = "INI9100U", \
+ .proc_info = NULL, \
+ .name = i91u_REVID, \
+ .detect = i91u_detect, \
+ .release = i91u_release, \
+ .info = NULL, \
+ .command = i91u_command, \
+ .queuecommand = i91u_queue, \
+ .eh_strategy_handler = NULL, \
+ .eh_abort_handler = NULL, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = NULL, \
+ .eh_host_reset_handler = NULL, \
+ .abort = i91u_abort, \
+ .reset = i91u_reset, \
+ .bios_param = i91u_biosparam, \
+ .can_queue = 1, \
+ .this_id = 1, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING, \
}
#define VIRT_TO_BUS(i) (unsigned int) virt_to_bus((void *)(i))
--- linux-2.5.51/drivers/scsi/inia100.h.old 2002-11-29 09:24:18.000000000 -0600
+++ linux-2.5.51/drivers/scsi/inia100.h 2002-12-10 14:28:32.000000000 -0600
@@ -85,21 +85,21 @@
#define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d"
#define INIA100 { \
- proc_name: "inia100", \
- name: inia100_REVID, \
- detect: inia100_detect, \
- release: inia100_release, \
- queuecommand: inia100_queue, \
- eh_abort_handler:inia100_abort, \
- eh_bus_reset_handler: inia100_bus_reset, \
- eh_device_reset_handler:inia100_device_reset, \
- can_queue: 1, \
- this_id: 1, \
- sg_tablesize: SG_ALL, \
- cmd_per_lun: 1, \
- present: 0, \
- unchecked_isa_dma: 0, \
- use_clustering: ENABLE_CLUSTERING, \
+ .proc_name = "inia100", \
+ .name = inia100_REVID, \
+ .detect = inia100_detect, \
+ .release = inia100_release, \
+ .queuecommand = inia100_queue, \
+ .eh_abort_handler = inia100_abort, \
+ .eh_bus_reset_handler = inia100_bus_reset, \
+ .eh_device_reset_handler = inia100_device_reset, \
+ .can_queue = 1, \
+ .this_id = 1, \
+ .sg_tablesize = SG_ALL, \
+ .cmd_per_lun = 1, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING, \
}
#define ULONG unsigned long
--- linux-2.5.51/drivers/scsi/ips.h.old 2002-11-29 09:24:19.000000000 -0600
+++ linux-2.5.51/drivers/scsi/ips.h 2002-12-10 14:28:33.000000000 -0600
@@ -407,80 +407,80 @@
* Scsi_Host Template
*/
#if LINUX_VERSION_CODE < LinuxVersionCode(2,4,0)
- #define IPS { \
- module : NULL, \
- proc_info : NULL, \
- proc_dir : NULL, \
- name : NULL, \
- detect : ips_detect, \
- release : ips_release, \
- info : ips_info, \
- command : NULL, \
- queuecommand : ips_queue, \
- eh_strategy_handler : NULL, \
- eh_abort_handler : ips_eh_abort, \
- eh_device_reset_handler : NULL, \
- eh_bus_reset_handler : NULL, \
- eh_host_reset_handler : ips_eh_reset, \
- abort : NULL, \
- reset : NULL, \
- slave_attach : NULL, \
- bios_param : ips_biosparam, \
- can_queue : 0, \
- this_id: -1, \
- sg_tablesize : IPS_MAX_SG, \
- cmd_per_lun: 3, \
- present : 0, \
- unchecked_isa_dma : 0, \
- use_clustering : ENABLE_CLUSTERING, \
- use_new_eh_code : 1 \
+#define IPS { \
+ .module = NULL, \
+ .proc_info = NULL, \
+ .proc_dir = NULL, \
+ .name = NULL, \
+ .detect = ips_detect, \
+ .release = ips_release, \
+ .info = ips_info, \
+ .command = NULL, \
+ .queuecommand = ips_queue, \
+ .eh_strategy_handler = NULL, \
+ .eh_abort_handler = ips_eh_abort, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = NULL, \
+ .eh_host_reset_handler = ips_eh_reset, \
+ .abort = NULL, \
+ .reset = NULL, \
+ .slave_attach = NULL, \
+ .bios_param = ips_biosparam,\
+ .can_queue = 0, \
+ .this_id = -1, \
+ .sg_tablesize = IPS_MAX_SG, \
+ .cmd_per_lun = 3, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING, \
+ .use_new_eh_code = 1 \
}
#elif LINUX_VERSION_CODE < LinuxVersionCode(2,5,0)
- #define IPS { \
- module : NULL, \
- proc_info : NULL, \
- name : NULL, \
- detect : ips_detect, \
- release : ips_release, \
- info : ips_info, \
- command : NULL, \
- queuecommand : ips_queue, \
- eh_strategy_handler : NULL, \
- eh_abort_handler : ips_eh_abort, \
- eh_device_reset_handler : NULL, \
- eh_bus_reset_handler : NULL, \
- eh_host_reset_handler : ips_eh_reset, \
- abort : NULL, \
- reset : NULL, \
- slave_attach : NULL, \
- bios_param : ips_biosparam, \
- can_queue : 0, \
- this_id: -1, \
- sg_tablesize : IPS_MAX_SG, \
- cmd_per_lun: 3, \
- present : 0, \
- unchecked_isa_dma : 0, \
- use_clustering : ENABLE_CLUSTERING, \
- use_new_eh_code : 1 \
+#define IPS{ \
+ .module = NULL, \
+ .proc_info = NULL, \
+ .name = NULL, \
+ .detect = ips_detect, \
+ .release = ips_release, \
+ .info = ips_info, \
+ .command = NULL, \
+ .queuecommand = ips_queue, \
+ .eh_strategy_handler = NULL, \
+ .eh_abort_handler = ips_eh_abort, \
+ .eh_device_reset_handler = NULL, \
+ .eh_bus_reset_handler = NULL, \
+ .eh_host_reset_handler = ips_eh_reset, \
+ .abort = NULL, \
+ .reset = NULL, \
+ .slave_attach = NULL, \
+ .bios_param = ips_biosparam,\
+ .can_queue = 0, \
+ .this_id = -1, \
+ .sg_tablesize = IPS_MAX_SG, \
+ .cmd_per_lun = 3, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING,\
+ .use_new_eh_code = 1 \
}
#else
- #define IPS { \
- detect : ips_detect, \
- release : ips_release, \
- info : ips_info, \
- queuecommand : ips_queue, \
- eh_abort_handler : ips_eh_abort, \
- eh_host_reset_handler : ips_eh_reset, \
- slave_configure : ips_slave_configure,\
- bios_param : ips_biosparam, \
- can_queue : 0, \
- this_id: -1, \
- sg_tablesize : IPS_MAX_SG, \
- cmd_per_lun: 3, \
- present : 0, \
- unchecked_isa_dma : 0, \
- use_clustering : ENABLE_CLUSTERING, \
- highmem_io : 1 \
+#define IPS { \
+ .detect = ips_detect, \
+ .release = ips_release, \
+ .info = ips_info, \
+ .queuecommand = ips_queue, \
+ .eh_abort_handler = ips_eh_abort, \
+ .eh_host_reset_handler = ips_eh_reset, \
+ .slave_configure = ips_slave_configure, \
+ .bios_param = ips_biosparam, \
+ .can_queue = 0, \
+ .this_id = -1, \
+ .sg_tablesize = IPS_MAX_SG, \
+ .cmd_per_lun = 3, \
+ .present = 0, \
+ .unchecked_isa_dma = 0, \
+ .use_clustering = ENABLE_CLUSTERING, \
+ .highmem_io = 1 \
}
#endif
--
They that can give up essential liberty to obtain a little temporary safety
deserve neither liberty nor safety.
-- Benjamin Franklin, Historical Review of Pennsylvania, 1759
reply other threads:[~2002-12-12 13:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021212140647.GD1794@debian \
--to=ahaas@airmail.net \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.