* [PATCH 2.5] cpufreq: move x86 configuration to "Power Management"
@ 2002-12-13 15:47 Dominik Brodowski
0 siblings, 0 replies; only message in thread
From: Dominik Brodowski @ 2002-12-13 15:47 UTC (permalink / raw)
To: torvalds; +Cc: linux-kernel, cpufreq, alan, davej
This patch moves the Kconfig entries for CPUfreq from "Processor type and
features" to "Power management options".
Dominik
diff -ruN linux-cpuinfo/arch/i386/Kconfig linux/arch/i386/Kconfig
--- linux-cpuinfo/arch/i386/Kconfig 2002-12-13 15:56:21.000000000 +0100
+++ linux/arch/i386/Kconfig 2002-12-13 16:20:24.000000000 +0100
@@ -465,104 +465,6 @@
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
-config CPU_FREQ
- bool "CPU Frequency scaling"
- help
- Clock scaling allows you to change the clock speed of CPUs on the
- fly. This is a nice method to save battery power on notebooks,
- because the lower the clock speed, the less power the CPU consumes.
-
- For more information, take a look at linux/Documentation/cpufreq or
- at <http://www.brodo.de/cpufreq/>
-
- If in doubt, say N.
-
-config CPU_FREQ_24_API
- bool "/proc/sys/cpu/ interface (2.4. / OLD)"
- depends on CPU_FREQ
- help
- This enables the /proc/sys/cpu/ sysctl interface for controlling
- CPUFreq, as known from the 2.4.-kernel patches for CPUFreq. 2.5
- uses /proc/cpufreq instead. Please note that some drivers do not
- work well with the 2.4. /proc/sys/cpu sysctl interface, so if in
- doubt, say N here.
-
- For details, take a look at linux/Documentation/cpufreq.
-
- If in doubt, say N.
-
-config X86_POWERNOW_K6
- tristate "AMD Mobile K6-2/K6-3 PowerNow!"
- depends on CPU_FREQ
- help
- This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
- AMD K6-3+ processors.
-
- For details, take a look at linux/Documentation/cpufreq.
-
- If in doubt, say N.
-
-config ELAN_CPUFREQ
- tristate "AMD Elan"
- depends on CPU_FREQ && MELAN
- ---help---
- This adds the CPUFreq driver for AMD Elan SC400 and SC410
- processors.
-
- You need to specify the processor maximum speed as boot
- parameter: elanfreq=maxspeed (in kHz) or as module
- parameter "max_freq".
-
- For details, take a look at linux/Documentation/cpufreq.
-
- If in doubt, say N.
-
-config X86_LONGHAUL
- tristate "VIA Cyrix III Longhaul"
- depends on CPU_FREQ
- help
- This adds the CPUFreq driver for VIA Samuel/CyrixIII,
- VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
- processors.
-
- For details, take a look at linux/Documentation/cpufreq.
-
- If in doubt, say N.
-
-config X86_SPEEDSTEP
- tristate "Intel Speedstep"
- depends on CPU_FREQ
- help
- This adds the CPUFreq driver for certain mobile Intel Pentium III
- (Coppermine), all mobile Intel Pentium III-M (Tulatin) and all
- mobile Intel Pentium 4 P4-Ms.
-
- For details, take a look at linux/Documentation/cpufreq.
-
- If in doubt, say N.
-
-config X86_P4_CLOCKMOD
- tristate "Intel Pentium 4 clock modulation"
- depends on CPU_FREQ
- help
- This adds the CPUFreq driver for Intel Pentium 4 / XEON
- processors.
-
- For details, take a look at linux/Documentation/cpufreq.
-
- If in doubt, say N.
-
-config X86_LONGRUN
- tristate "Transmeta LongRun"
- depends on CPU_FREQ
- help
- This adds the CPUFreq driver for Transmeta Crusoe processors which
- support LongRun.
-
- For details, take a look at linux/Documentation/cpufreq.
-
- If in doubt, say N.
-
config TOSHIBA
tristate "Toshiba Laptop support"
---help---
@@ -985,6 +887,104 @@
a work-around for a number of buggy BIOSes. Switch this option on if
your computer crashes instead of powering off properly.
+config CPU_FREQ
+ bool "CPU Frequency scaling"
+ help
+ Clock scaling allows you to change the clock speed of CPUs on the
+ fly. This is a nice method to save battery power on notebooks,
+ because the lower the clock speed, the less power the CPU consumes.
+
+ For more information, take a look at linux/Documentation/cpufreq or
+ at <http://www.brodo.de/cpufreq/>
+
+ If in doubt, say N.
+
+config CPU_FREQ_24_API
+ bool "/proc/sys/cpu/ interface (2.4. / OLD)"
+ depends on CPU_FREQ
+ help
+ This enables the /proc/sys/cpu/ sysctl interface for controlling
+ CPUFreq, as known from the 2.4.-kernel patches for CPUFreq. 2.5
+ uses /proc/cpufreq instead. Please note that some drivers do not
+ work well with the 2.4. /proc/sys/cpu sysctl interface, so if in
+ doubt, say N here.
+
+ For details, take a look at linux/Documentation/cpufreq.
+
+ If in doubt, say N.
+
+config X86_POWERNOW_K6
+ tristate "AMD Mobile K6-2/K6-3 PowerNow!"
+ depends on CPU_FREQ
+ help
+ This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
+ AMD K6-3+ processors.
+
+ For details, take a look at linux/Documentation/cpufreq.
+
+ If in doubt, say N.
+
+config ELAN_CPUFREQ
+ tristate "AMD Elan"
+ depends on CPU_FREQ && MELAN
+ ---help---
+ This adds the CPUFreq driver for AMD Elan SC400 and SC410
+ processors.
+
+ You need to specify the processor maximum speed as boot
+ parameter: elanfreq=maxspeed (in kHz) or as module
+ parameter "max_freq".
+
+ For details, take a look at linux/Documentation/cpufreq.
+
+ If in doubt, say N.
+
+config X86_LONGHAUL
+ tristate "VIA Cyrix III Longhaul"
+ depends on CPU_FREQ
+ help
+ This adds the CPUFreq driver for VIA Samuel/CyrixIII,
+ VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
+ processors.
+
+ For details, take a look at linux/Documentation/cpufreq.
+
+ If in doubt, say N.
+
+config X86_SPEEDSTEP
+ tristate "Intel Speedstep"
+ depends on CPU_FREQ
+ help
+ This adds the CPUFreq driver for certain mobile Intel Pentium III
+ (Coppermine), all mobile Intel Pentium III-M (Tulatin) and all
+ mobile Intel Pentium 4 P4-Ms.
+
+ For details, take a look at linux/Documentation/cpufreq.
+
+ If in doubt, say N.
+
+config X86_P4_CLOCKMOD
+ tristate "Intel Pentium 4 clock modulation"
+ depends on CPU_FREQ
+ help
+ This adds the CPUFreq driver for Intel Pentium 4 / XEON
+ processors.
+
+ For details, take a look at linux/Documentation/cpufreq.
+
+ If in doubt, say N.
+
+config X86_LONGRUN
+ tristate "Transmeta LongRun"
+ depends on CPU_FREQ
+ help
+ This adds the CPUFreq driver for Transmeta Crusoe processors which
+ support LongRun.
+
+ For details, take a look at linux/Documentation/cpufreq.
+
+ If in doubt, say N.
+
endmenu
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-12-13 15:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-12-13 15:47 [PATCH 2.5] cpufreq: move x86 configuration to "Power Management" Dominik Brodowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.