From: "bladi" <bladi-sec@novasec.es>
To: linux-kernel@vger.kernel.org
Subject: Problem with 2.4.21-pre1 Promise PDC20276
Date: Sat, 14 Dec 2002 16:20:08 +0100 [thread overview]
Message-ID: <20021214152008.M92869@novasec.es> (raw)
Hi.
i have PDC20276 BIOS ver 2.20.1020.13 promise device
And with kernel 2.4.21-pre1 the kernel recognize correctly the promise card
but not the IDE devices. With 2.4.20 it work correctly using the same .config
file.
--------- 2.4.21-pre1 -----------------
PDC20276: IDE controller at PCI slot 00:0f.0
PDC20276: chipset revision 1
PDC20276: not 100% native mode: will probe irqs later
PDC20276: neither IDE port enabled (BIOS)
I try to load as kernel module too and pdc202xx_new.o give me the same error.
/proc/ide/pdcnew
MBFastTrak 133 Lite Chipset.
---------- 2.4.20 -----------
PDC20276: IDE controller on PCI bus 00 dev 78
PDC20276: chipset revision 1
PDC20276: not 100% native mode: will probe irqs later
PDC20276: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode. ide2: BM-DMA at 0xd000-0xd007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xd008-0xd00f, BIOS settings: hdg:pio, hdh:pio
/proc/ide/pdc202xx
PROMISE Ultra series driver Ver 1.20.0.7 2002-05-23 Adapter: Ultra Series
--------------- Primary Channel ---------------- Secondary Channel
------------- enabled enabled
66 Clocking enabled enabled
Mode MASTER MASTER
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1
------DMA enabled: no no yes no
UDMA Mode: 0 0 2 0
PIO Mode: 0 0 4 0
--
NovaSec Servicios de Seguridad
http://www.novasec.es
C\ Evaristo San Miguel 4 2º6 (Princesa)
28008 Madrid (España)
Tel: 91 547 30 51
Fax: 91 559 41 75
reply other threads:[~2002-12-14 15:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021214152008.M92869@novasec.es \
--to=bladi-sec@novasec.es \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.