From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Tue, 17 Dec 2002 15:09:09 +1100 From: Erik Christiansen To: Jin Cheng Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Compiling ucd-snmp using ELDK for PPC Message-ID: <20021217040909.GA694@dd.nec.com.au> Reply-To: linuxppc-embedded@lists.linuxppc.org References: <3DFA33AE.A1F2C35D@redswitch.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <3DFA33AE.A1F2C35D@redswitch.com> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Fri, Dec 13, 2002 at 11:23:26AM -0800, Jin Cheng wrote: > I have compiled one, but only can snmpget/snmpwalk/etc, but can not > snmpset, it always returns timeout. Presumably you have looked in /var/log/snmpd.log , to see what it is telling you about the problem. Chances are that your access control is not right. Have you tried everything in the FAQs on http://www.net-snmp.org/ ?? You might like to try the mailing list (ucd-snmp was renamed net-snmp some time ago): List-Id: General discussion forum for net-snmp users List-Subscribe: net-snmp-users-request@lists.sourceforge.net subject=subscribe List-Post: net-snmp-users@lists.sourceforge.net Searchable Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=4959 The archive will give you plenty of things to check. That list will be better equipped to advise. Regards, Erik ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/