From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 19 Dec 2002 09:39:41 -0700 From: Tom Rini To: James Don Cc: "'Prakash kanthi'" , LinuxPPC Subject: Re: After Uncompresseing Linux..., what's next Message-ID: <20021219163941.GC852@opus.bloom.county> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Thu, Dec 19, 2002 at 11:10:41AM -0500, James Don wrote: > 2.) Veryfy you have your mem map from ppcboot matching requirements for the > kernel i.e ram (physical=0x0, virtual=0xc0000000) and immr (phys 0xff000000 > virtual 0xff000000) ... I had my immr in ppc boot at 0x02200000 this screwed > me for quite a while ... otherwise you have no printk ... the memory map is > very important not to screw with some things depend on it (unless your > careful) ... > > 3.) verify you SMC1 (uart) is getting proper clocking config ... i.e > bus->brg1 and brg1 is 16 times baud rate ... otherwise you have no printk That's all 8xx-specific isn't it 'tho? It looks like this is a Xilinx ML300 board, and thus a '40x'. -- Tom Rini (TR1265) http://gate.crashing.org/~trini/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/