From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Osterried Subject: Re: Strange AXIP / AX25 Frames Date: Wed, 8 Jan 2003 01:01:58 +0100 Sender: linux-hams-owner@vger.kernel.org Message-ID: <20030108000158.GA25575@osterried.de> References: <200301071516.56542.robert@steinhaeusser.com> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <200301071516.56542.robert@steinhaeusser.com> List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Robert =?iso-8859-1?Q?Steinh=E4u=DFer?= Cc: linux-hams@vger.kernel.org > > > 9: fm [invalid] to [invalid] via 90gGB7-2* M0GB7-3* [invalid] [invalid]* > > > [invalid] gGB7BM 0GB7CR [invalid] ctl [invalid]0^ [DAMA] > > > > Kernel 2.4.20 & latest AX25 apps, lib, tools. TNC-2 in KISS-mode. > > KISS mode normally has no checksumming, so any stray HF will mess up the data > on your serial line between TNC and PC. Use shielded cabling and SMACK or > RMNC-CRC-KISS or (even better for numerous reasons) 6PACK. the initial question was for a problem with axip. because axip frames have a checksum, these errors should not occur. kiss: there are some checksum variants for kiss. one is crc-rmnc, the other is smack. for crc-cmnc, there's no tnc software available. on the other hand, smack is not implemented in the linux kernel kiss module. considering this, 6pack is the better choice. back to the problem. kernel 2.4.20 is quite new. it would be great if you could test, if it is - a kernel problem - a problem with libax25 / ax25tools - listen does not exactly match with the libax25 library - a recompile may help whil still running kernel-2.4.19, i could say nothing abt 2.4.20 issuses, but if i remember correctly, there were only some scc driver fixes. 73, - thomas dl9sau