From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Wed, 08 Jan 2003 08:47:39 +0100 Subject: [U-Boot-Users] Configuring linux kernel for custom board In-Reply-To: Your message of "Wed, 08 Jan 2003 10:28:48 +1100." Message-ID: <20030108074744.7C6ACC608E@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message you wrote: > > I'm not to sure if this question is long overdue, but is there a guide > somewhere to help me with customising linux for my custom board? Not on this list. This is the U-Boot mailing list. Standard Linux configuration issues are off topic here. > At the moment, I have based my MPC860T around the fads860t > configuration, making changes where I *think* are appropriate (i.e. > getting rid of the BCSR references). I am concerned with the files I > have added to the kernel are not "right" and want to verify the process > of porting linux to a custom board. It will be difficult to answer such a question anyway, as you first have to explain exactly what you did and what you need. This will include a detailed description of your hardware (probably including the schematics) and your software requirements (devices, driver sources, ...). You cannot expect such detailed help on a mailing list. Hire an expert. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Another megabytes the dust.