From: Gerd Knorr <kraxel@bytesex.org>
To: Linus Torvalds <torvalds@transmeta.com>,
Kernel List <linux-kernel@vger.kernel.org>
Subject: [patch] bttv driver update.
Date: Wed, 8 Jan 2003 12:59:25 +0100 [thread overview]
Message-ID: <20030108115925.GA12607@bytesex.org> (raw)
Hi,
This patch updates the bttv driver. Changes:
* adaptions to the video-buf changes send in a previous mail.
* adaptions to recent i2c changes in the kernel.
* first code bits the pixelview digital camera support (not
working yet).
* lots of small fixes/changes for specific TV cards.
Please apply,
Gerd
--- linux-2.5.54/drivers/media/video/bttv-cards.c 2003-01-08 10:34:28.000000000 +0100
+++ linux/drivers/media/video/bttv-cards.c 2003-01-08 10:59:58.000000000 +0100
@@ -37,15 +37,15 @@
#include "bttvp.h"
#include "tuner.h"
-#if 0
-# include "bt832.h"
-#endif
+#include "bt832.h"
/* fwd decl */
static void boot_msp34xx(struct bttv *btv, int pin);
+static void boot_bt832(struct bttv *btv);
static void hauppauge_eeprom(struct bttv *btv);
static void avermedia_eeprom(struct bttv *btv);
static void osprey_eeprom(struct bttv *btv);
+static void modtec_eeprom(struct bttv *btv);
static void init_PXC200(struct bttv *btv);
static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
@@ -64,12 +64,15 @@
static int terratec_active_radio_upgrade(struct bttv *btv);
static int tea5757_read(struct bttv *btv);
static int tea5757_write(struct bttv *btv, int value);
+int is_MM20xPCTV(unsigned char eeprom_data[256]);
/* config variables */
static int triton1=0;
static int vsfx=0;
-int no_overlay=-1;
+static int no_overlay=-1;
+static int latency = -1;
+
static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = -1};
static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = -1};
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = -1};
@@ -90,6 +93,8 @@
MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
"[yet another chipset flaw workaround]");
MODULE_PARM(no_overlay,"i");
+MODULE_PARM(latency,"i");
+MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM(card,"1-" __stringify(BTTV_MAX) "i");
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM(pll,"1-" __stringify(BTTV_MAX) "i");
@@ -153,7 +158,7 @@
{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV" },
{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
- { 0x001c11bd, BTTV_PINNACLE, "Pinnacle PCTV Sat" },
+ { 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
{ 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
@@ -166,21 +171,23 @@
{ 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
{ 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
+ { 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
{ 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
{ 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
- { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue" },
- { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue" },
- { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue" },
- { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue" },
+ { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
+ { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
+ { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
+ { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
+
{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
- { 0x1127153b, BTTV_TERRATV, "Terratec TV+" },
+ { 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
// clashes with FlyVideo
- //{ 0x18521852, BTTV_TERRATV, "Terratec TV+" },
- { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue" },
- { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" },
- { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" },
+ //{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" },
+ { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
+ { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
+ { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
{ 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
@@ -189,7 +196,7 @@
{ 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x010115cb, BTTV_GMV1, "AG GMV1" },
- { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM205 PCTV" },
+ { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
{ 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
{ 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
@@ -198,6 +205,7 @@
{ 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
{ 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
{ 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
+ { 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
{ 0, -1, NULL }
};
@@ -479,13 +487,14 @@
.pll = PLL_28,
.tuner_type = -1,
},{
- .name = "Modular Technology MM205 PCTV, bt878",
- .video_inputs = 2,
+ .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
+ .video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = -1,
.gpiomask = 7,
- .muxsel = { 2, 3 },
+ .muxsel = { 2, 3, -1 },
+ .digital_mode = DIGITAL_MODE_CAMERA,
.audiomux = { 0, 0, 0, 0, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
@@ -608,14 +617,15 @@
.tuner_type = -1,
},{
.name = "Formac iProTV",
- .video_inputs = 3,
+ .video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
- .svhs = 2,
+ .svhs = 3,
.gpiomask = 1,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 1, 0, 0, 0, 0 },
- .tuner_type = -1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
},{
/* ---- card 0x20 ---------------------------------- */
@@ -861,12 +871,13 @@
.audio_hook = gvbctv3pci_audio,
},{
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
- .video_inputs = 4,
+ .video_inputs = 5,
.audio_inputs = 1,
.tuner = 0,
.svhs = 3,
.gpiomask = 0xAA0000,
- .muxsel = { 2,3,1,1 },
+ .muxsel = { 2,3,1,1,-1 },
+ .digital_mode = DIGITAL_MODE_CAMERA,
.audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
.no_msp34xx = 1,
.pll = PLL_28,
@@ -902,7 +913,7 @@
.svhs = 2,
.gpiomask = 0x03000F,
.muxsel = { 2, 3, 1, 1},
- .audiomux = { 1, 0x10001, 0, 0, 10},
+ .audiomux = { 1, 0xd0001, 0, 0, 10},
/* sound path (5 sources):
MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
0= ext. Audio IN
@@ -1165,10 +1176,10 @@
.tuner_type = -1,
.pll = PLL_28,
.muxsel = { 2 },
- .gpiomask = 0
+ gpiomask: 0
},{
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
- .name = "Prolink Pixelview PV-BT878P+ (Rev.4C)",
+ .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
.video_inputs = 3,
.audio_inputs = 4,
.tuner = 0,
@@ -1252,7 +1263,7 @@
},{
.name = "Powercolor MTV878/ MTV878R/ MTV878F",
.video_inputs = 3,
- .audio_inputs = 2,
+ audio_inputs: 2,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
@@ -1292,7 +1303,7 @@
},{
.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
.video_inputs = 4,
- .audio_inputs = 3,
+ audio_inputs: 3,
.tuner = 0,
.svhs = 2,
.gpiomask = 7,
@@ -1313,7 +1324,7 @@
GPIO0,1: HEF4052 A0,A1
GPIO2: HEF4052 nENABLE
GPIO3-7: n.c.
- GPIO8-13: IRDC357 data0,5 (data6 n.c. ?) [chip not present on my card]
+ GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
GPIO14,15: ??
GPIO16-21: n.c.
GPIO22,23: ??
@@ -1513,6 +1524,65 @@
.no_msp34xx = 1,
.no_tda9875 = 1,
.pll = PLL_28,
+},{
+ .name = "Pinnacle PCTV Sat",
+ .video_inputs = 2,
+ .audio_inputs = 0,
+ .svhs = 1,
+ .tuner = -1,
+ .tuner_type = -1,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+ .muxsel = { 3, 0, 1, 2},
+ .needs_tvaudio = 0,
+ .pll = PLL_28,
+},{
+ .name = "Formac ProTV II",
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 3,
+ .gpiomask = 2,
+ // TV, Comp1, Composite over SVID con, SVID
+ .muxsel = { 2, 3, 1, 1},
+ .audiomux = { 2, 2, 0, 0, 0 },
+ .pll = PLL_28,
+ .has_radio = 1,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ /* sound routing:
+ GPIO=0x00,0x01,0x03: mute (?)
+ 0x02: both TV and radio (tuner: FM1216/I)
+ The card has onboard audio connectors labeled "cdrom" and "board",
+ not soldered here, though unknown wiring.
+ Card lacks: external audio in, pci subsystem id.
+ */
+
+},{
+ /* ---- card 0x60 ---------------------------------- */
+ .name = "MachTV",
+ .video_inputs = 3,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = -1,
+ .gpiomask = 7,
+ .muxsel = { 2, 3, 1, 1},
+ .audiomux = { 0, 1, 2, 3, 4},
+ .needs_tvaudio = 1,
+ .tuner_type = 5,
+ .pll = 1,
+},{
+ .name = "Euresys Picolo",
+ .video_inputs = 3,
+ .audio_inputs = 0,
+ .tuner = -1,
+ .svhs = 2,
+ .gpiomask = 0,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+ .muxsel = { 2, 0, 1},
+ .pll = PLL_28,
}};
const int bttv_num_tvcards = (sizeof(bttv_tvcards)/sizeof(struct tvcard));
@@ -1556,7 +1626,7 @@
printk(KERN_DEBUG "please mail id, board name and "
"the correct card= insmod option to kraxel@bytesex.org\n");
}
- }
+ }
/* let the user override the autodetected type */
if (card[btv->nr] >= 0 && card[btv->nr] < bttv_num_tvcards)
@@ -1601,6 +1671,16 @@
* (most) board specific initialisations goes here
*/
+/* Some Modular Technology cards have an eeprom, but no subsystem ID */
+int is_MM20xPCTV(unsigned char eeprom_data[256])
+{
+ if (0 == strncmp(eeprom_data,"GET.MM20xPCTV",13)) {
+ printk("bttv: GET.MM20xPCTV found\n");
+ return 1; // found
+ }
+ return 0;
+}
+
static void flyvideo_gpio(struct bttv *btv)
{
int gpio,outbits,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
@@ -1624,7 +1704,7 @@
ttype=(gpio&0x0f0000)>>16;
switch(ttype) {
- case 0x0: tuner=4; // None
+ case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
break;
case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
break;
@@ -1647,6 +1727,9 @@
is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
// gpio & 0x001000 // output bit for audio routing
+ if(is_capture_only)
+ tuner=4; // No tuner present
+
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
btv->nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
@@ -1659,7 +1742,7 @@
// LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
// LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
- // Audio options: from tuner, from tda9821/tda9821(mono,stereo.sap), from tda9874, ext., mute
+ // Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
//todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
}
@@ -1816,6 +1899,16 @@
{
btv->tuner_type = -1;
+ if (BTTV_UNKNOWN == btv->type) {
+ printk("bttv%d: Looking for eeprom\n",btv->nr);
+ bttv_readee(btv,eeprom_data,0xa0);
+ if(is_MM20xPCTV(eeprom_data)) {
+ btv->type = BTTV_MODTEC_205;
+ printk("bttv%d: Autodetect by eeprom:(%s) [card=%d]\n",
+ btv->nr, bttv_tvcards[btv->type].name, btv->type);
+ }
+ }
+
switch (btv->type) {
case BTTV_MIRO:
case BTTV_MIROPRO:
@@ -1896,6 +1989,10 @@
case BTTV_IDS_EAGLE:
init_ids_eagle(btv);
break;
+ case BTTV_MODTEC_205:
+ bttv_readee(btv,eeprom_data,0xa0);
+ modtec_eeprom(btv);
+ break;
}
/* pll configuration */
@@ -1930,6 +2027,7 @@
break;
}
}
+ btv->pll.pll_current = -1;
/* tuner configuration (from card list / autodetect / insmod option) */
if (-1 != bttv_tvcards[btv->type].tuner_type)
@@ -1947,33 +2045,12 @@
if (bttv_tvcards[btv->type].audio_hook)
btv->audio_hook=bttv_tvcards[btv->type].audio_hook;
-#if 0
- /* detect Bt832 chip for quartzsight digital camera */
- if((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
- (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0)) {
- int outbits,databits;
- request_module("bt832");
-
- bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
-
- printk("Reset Bt832 (0x400000 for Pixelview 4E)\n");
- btwrite(0, BT848_GPIO_DATA);
- outbits = btread(BT848_GPIO_OUT_EN);
- databits= btread(BT848_GPIO_DATA);
- btwrite(0x400000, BT848_GPIO_OUT_EN);
- udelay(5);
- btwrite(0x400000, BT848_GPIO_DATA);
- udelay(5);
- btwrite(0, BT848_GPIO_DATA);
- udelay(5);
- btwrite(outbits, BT848_GPIO_OUT_EN);
- btwrite(databits, BT848_GPIO_DATA);
-
- // bt832 on pixelview changes from i2c 0x8a to 0x88 after
- // being reset as above. So we must follow by this:
- bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
+ if (bttv_tvcards[btv->type].digital_mode == DIGITAL_MODE_CAMERA) {
+ /* detect Bt832 chip for quartzsight digital camera */
+ if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
+ (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
+ boot_bt832(btv);
}
-#endif
/* try to detect audio/fader chips */
if (!bttv_tvcards[btv->type].no_msp34xx &&
@@ -2069,6 +2146,16 @@
{ TUNER_LG_PAL_I, "LG TAPC-I701D"}
};
+static void modtec_eeprom(struct bttv *btv)
+{
+ if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
+ btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
+ printk("bttv Modtec: Tuner autodetected %s\n",&eeprom_data[0x1e]);
+ }
+ else
+ printk("bttv Modtec: Unknown TunerString:%s\n",&eeprom_data[0x1e]);
+}
+
static void __devinit hauppauge_eeprom(struct bttv *btv)
{
int blk2,tuner,radio,model;
@@ -2316,8 +2403,8 @@
/* AVermedia specific stuff, from bktr_card.c */
int tuner_0_table[] = {
- TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL,
- TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
+ TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
+ TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL};
@@ -2408,6 +2495,41 @@
"init [%d]\n", btv->nr, pin);
}
+static void __devinit boot_bt832(struct bttv *btv)
+{
+ int outbits,databits,resetbit=0;
+
+ switch (btv->type) {
+ case BTTV_PXELVWPLTVPAK:
+ resetbit = 0x400000;
+ break;
+ case BTTV_MODTEC_205:
+ resetbit = 1<<9;
+ break;
+ default:
+ BUG();
+ }
+
+ request_module("bt832");
+ bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
+
+ printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->nr,resetbit);
+ btwrite(0, BT848_GPIO_DATA);
+ outbits = btread(BT848_GPIO_OUT_EN);
+ databits= btread(BT848_GPIO_DATA);
+ btwrite(resetbit, BT848_GPIO_OUT_EN);
+ udelay(5);
+ btwrite(resetbit, BT848_GPIO_DATA);
+ udelay(5);
+ btwrite(0, BT848_GPIO_DATA);
+ udelay(5);
+ btwrite(outbits, BT848_GPIO_OUT_EN);
+ btwrite(databits, BT848_GPIO_DATA);
+
+ // bt832 on pixelview changes from i2c 0x8a to 0x88 after
+ // being reset as above. So we must follow by this:
+ bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
+}
/* ----------------------------------------------------------------------- */
/* Imagenation L-Model PXC200 Framegrabber */
@@ -2980,13 +3102,16 @@
int pcipci_fail = 0;
struct pci_dev *dev = NULL;
- /* for 2.4.x we'll use the pci quirks (drivers/pci/quirks.c) */
if (pci_pci_problems & PCIPCI_FAIL)
pcipci_fail = 1;
if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
triton1 = 1;
if (pci_pci_problems & PCIPCI_VSFX)
vsfx = 1;
+#ifdef PCIPCI_ALIMAGIK
+ if (pci_pci_problems & PCIPCI_ALIMAGIK)
+ latency = 0x0A;
+#endif
/* print which chipset we have */
while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
@@ -2997,7 +3122,6 @@
printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
if (vsfx)
printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
-
if (pcipci_fail) {
printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
if (-1 == no_overlay) {
@@ -3005,30 +3129,34 @@
no_overlay = 1;
}
}
+ if (-1 != latency)
+ printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82441, dev))) {
unsigned char b;
- pci_read_config_byte(dev, 0x53, &b);
+ pci_read_config_byte(dev, 0x53, &b);
if (bttv_debug)
printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
"bufcon=0x%02x\n",b);
}
-
}
int __devinit bttv_handle_chipset(struct bttv *btv)
{
unsigned char command;
- if (!triton1 && !vsfx)
+ if (!triton1 && !vsfx && -1 == latency)
return 0;
if (bttv_verbose) {
if (triton1)
- printk("bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr);
+ printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->nr);
if (vsfx && btv->id >= 878)
- printk("bttv%d: enabling VSFX\n",btv->nr);
+ printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->nr);
+ if (-1 != latency)
+ printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
+ btv->nr,latency);
}
if (btv->id < 878) {
@@ -3044,6 +3172,8 @@
command |= BT878_EN_VSFX;
pci_write_config_byte(btv->dev, BT878_DEVCTRL, command);
}
+ if (-1 != latency)
+ pci_write_config_byte(btv->dev, PCI_LATENCY_TIMER, latency);
return 0;
}
--- linux-2.5.54/drivers/media/video/bttv-driver.c 2003-01-08 10:34:54.000000000 +0100
+++ linux/drivers/media/video/bttv-driver.c 2003-01-08 10:59:58.000000000 +0100
@@ -39,8 +39,6 @@
#include "bttvp.h"
#include "tuner.h"
-/* 2.4 / 2.5 driver compatibility stuff */
-
int bttv_num; /* number of Bt848s in use */
struct bttv bttvs[BTTV_MAX];
@@ -58,13 +56,14 @@
static unsigned int irq_debug = 0;
static unsigned int gbuffers = 8;
static unsigned int gbufsize = 0x208000;
-static unsigned int fdsr = 0;
-static unsigned int latency = -1;
static int video_nr = -1;
static int radio_nr = -1;
static int vbi_nr = -1;
+static unsigned int fdsr = 0;
+static unsigned int gpint = 1;
+
/* options */
static unsigned int combfilter = 0;
static unsigned int lumafilter = 0;
@@ -94,14 +93,14 @@
MODULE_PARM_DESC(gbuffers,"number of capture buffers. range 2-32, default 8");
MODULE_PARM(gbufsize,"i");
MODULE_PARM_DESC(gbufsize,"size of the capture buffers, default is 0x208000");
-MODULE_PARM(fdsr,"i");
-MODULE_PARM(latency,"i");
-MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM(video_nr,"i");
MODULE_PARM(radio_nr,"i");
MODULE_PARM(vbi_nr,"i");
+MODULE_PARM(fdsr,"i");
+MODULE_PARM(gpint,"i");
+
MODULE_PARM(combfilter,"i");
MODULE_PARM(lumafilter,"i");
MODULE_PARM(automute,"i");
@@ -132,6 +131,7 @@
{
/* PAL digital input over GPIO[7:0] */
{
+ 45, // 45 bytes following
0x36,0x11,0x01,0x00,0x90,0x02,0x05,0x10,0x04,0x16,
0x12,0x05,0x11,0x00,0x04,0x12,0xC0,0x00,0x31,0x00,
0x06,0x51,0x08,0x03,0x89,0x08,0x07,0xC0,0x44,0x00,
@@ -140,6 +140,7 @@
},
/* NTSC digital input over GPIO[7:0] */
{
+ 51, // 51 bytes following
0x0C,0xC0,0x00,0x00,0x90,0x02,0x03,0x10,0x03,0x06,
0x10,0x04,0x12,0x12,0x05,0x02,0x13,0x04,0x19,0x00,
0x04,0x39,0x00,0x06,0x59,0x08,0x03,0x83,0x08,0x07,
@@ -147,6 +148,16 @@
0x0D,0x02,0x03,0x11,0x01,0x05,0x37,0x00,0xAC,0x21,
0x00,
},
+ // TGB_NTSC392 // quartzsight
+ // This table has been modified to be used for Fusion Rev D
+ {
+ 0x2A, // size of table = 42
+ 0x06, 0x08, 0x04, 0x0a, 0xc0, 0x00, 0x18, 0x08, 0x03, 0x24,
+ 0x08, 0x07, 0x02, 0x90, 0x02, 0x08, 0x10, 0x04, 0x0c, 0x10,
+ 0x05, 0x2c, 0x11, 0x04, 0x55, 0x48, 0x00, 0x05, 0x50, 0x00,
+ 0xbf, 0x0c, 0x02, 0x2f, 0x3d, 0x00, 0x2f, 0x3f, 0x00, 0xc3,
+ 0x20, 0x00
+ }
};
const struct bttv_tvnorm bttv_tvnorms[] = {
@@ -170,7 +181,7 @@
.vbipack = 255,
.sram = 0,
},{
- .v4l2_id = V4L2_STD_NTSC,
+ .v4l2_id = V4L2_STD_NTSC_M,
.name = "NTSC",
.Fsc = 28636363,
.swidth = 768,
@@ -635,28 +646,31 @@
btwrite(fi|BT848_PLL_X, BT848_PLL_XCI);
}
-static int set_pll(struct bttv *btv)
+static void set_pll(struct bttv *btv)
{
int i;
if (!btv->pll.pll_crystal)
- return 0;
+ return;
+
+ if (btv->pll.pll_ofreq == btv->pll.pll_current) {
+ dprintk("bttv%d: PLL: no change required\n",btv->nr);
+ return;
+ }
if (btv->pll.pll_ifreq == btv->pll.pll_ofreq) {
/* no PLL needed */
if (btv->pll.pll_current == 0)
- return 0;
- vprintk("bttv%d: PLL: switching off\n",btv->nr);
+ return;
+ vprintk(KERN_INFO "bttv%d: PLL can sleep, using XTAL (%d).\n",
+ btv->nr,btv->pll.pll_ifreq);
btwrite(0x00,BT848_TGCTRL);
btwrite(0x00,BT848_PLL_XCI);
btv->pll.pll_current = 0;
- return 0;
+ return;
}
- if (btv->pll.pll_ofreq == btv->pll.pll_current)
- return 0;
-
- vprintk("bttv%d: PLL: %d => %d ",btv->nr,
+ vprintk(KERN_INFO "bttv%d: PLL: %d => %d ",btv->nr,
btv->pll.pll_ifreq, btv->pll.pll_ofreq);
set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq);
@@ -672,40 +686,43 @@
btwrite(0x08,BT848_TGCTRL);
btv->pll.pll_current = btv->pll.pll_ofreq;
vprintk(" ok\n");
- return 0;
+ return;
}
}
btv->pll.pll_current = -1;
vprintk("failed\n");
- return -1;
+ return;
}
/* used to switch between the bt848's analog/digital video capture modes */
void bt848A_set_timing(struct bttv *btv)
{
- u8 dvsif_val = 0;
- int table_idx = bttv_tvnorms[btv->tvnorm].sram;
- int i;
-
- /* timing change...reset timing generator address */
- btwrite(0x00, BT848_TGCTRL);
- btwrite(0x02, BT848_TGCTRL);
- btwrite(0x00, BT848_TGCTRL);
-
- if (btv->digital_video && -1 != table_idx) {
- dprintk("bttv%d: load digital timing table (table_idx=%d)\n",
- btv->nr,table_idx);
- dvsif_val = 0x41;
- for(i = 0; i < 51; i++)
- btwrite(SRAM_Table[table_idx][i],BT848_TGLB);
-
- btwrite(0x75,BT848_PLL_F_LO);
- btwrite(0x50,BT848_PLL_F_HI);
- btwrite(0x8B,BT848_PLL_XCI);
- btwrite(0x11,BT848_TGCTRL);
- btv->pll.pll_current = 0;
- }
- btwrite(dvsif_val,BT848_DVSIF);
+ int i, len;
+ int table_idx = bttv_tvnorms[btv->tvnorm].sram;
+ int fsc = bttv_tvnorms[btv->tvnorm].Fsc;
+
+ if (bttv_tvcards[btv->type].muxsel[btv->input] < 0) {
+ dprintk("bttv%d: load digital timing table (table_idx=%d)\n",
+ btv->nr,table_idx);
+
+ /* timing change...reset timing generator address */
+ btwrite(0x00, BT848_TGCTRL);
+ btwrite(0x02, BT848_TGCTRL);
+ btwrite(0x00, BT848_TGCTRL);
+
+ len=SRAM_Table[table_idx][0];
+ for(i = 1; i <= len; i++)
+ btwrite(SRAM_Table[table_idx][i],BT848_TGLB);
+ btv->pll.pll_ofreq = 27000000;
+
+ set_pll(btv);
+ btwrite(0x11, BT848_TGCTRL);
+ btwrite(0x41, BT848_DVSIF);
+ } else {
+ btv->pll.pll_ofreq = fsc;
+ set_pll(btv);
+ btwrite(0x0, BT848_DVSIF);
+ }
}
/* ----------------------------------------------------------------------- */
@@ -878,13 +895,7 @@
BT848_IFORM);
btwrite(tvnorm->vbipack, BT848_VBI_PACK_SIZE);
btwrite(1, BT848_VBI_PACK_DEL);
-
- if (btv->digital_video) {
- bt848A_set_timing(btv);
- } else {
- btv->pll.pll_ofreq = tvnorm->Fsc;
- set_pll(btv);
- }
+ bt848A_set_timing(btv);
switch (btv->type) {
case BTTV_VOODOOTV_FM:
@@ -1133,9 +1144,7 @@
{
int need_count = 0;
- if (locked_btres(btv,RESOURCE_VIDEO))
- need_count++;
- if (locked_btres(btv,RESOURCE_VBI))
+ if (btv->users)
need_count++;
if (need_count) {
@@ -1245,7 +1254,7 @@
}
#if 0
- if (STATE_NEEDS_INIT == buf->vb.state)
+ if (STATE_NEEDS_INIT == buf->vb.state) {
if (redo_dma_risc)
bttv_dma_free(btv,buf);
}
@@ -1275,7 +1284,7 @@
{
struct bttv_fh *fh = file->private_data;
- *size = fh->buf.fmt->depth*fh->buf.vb.width*fh->buf.vb.height >> 3;
+ *size = fh->fmt->depth*fh->width*fh->height >> 3;
if (0 == *count)
*count = gbuffers;
while (*size * *count > gbuffers * gbufsize)
@@ -1284,14 +1293,14 @@
}
static int
-buffer_prepare(struct file *file, struct videobuf_buffer *vb)
+buffer_prepare(struct file *file, struct videobuf_buffer *vb,
+ enum v4l2_field field)
{
struct bttv_buffer *buf = (struct bttv_buffer*)vb;
struct bttv_fh *fh = file->private_data;
- return bttv_prepare_buffer(fh->btv,buf,fh->buf.fmt,
- fh->buf.vb.width,fh->buf.vb.height,
- fh->buf.vb.field);
+ return bttv_prepare_buffer(fh->btv, buf, fh->fmt,
+ fh->width, fh->height, field);
}
static void
@@ -1357,6 +1366,8 @@
{
struct video_tuner *v = arg;
+ if (-1 == bttv_tvcards[btv->type].tuner)
+ return -EINVAL;
if (v->tuner) /* Only tuner 0 */
return -EINVAL;
strcpy(v->name, "Television");
@@ -1517,10 +1528,15 @@
case VIDIOC_ENUMINPUT:
{
struct v4l2_input *i = arg;
-
- if (i->index >= bttv_tvcards[btv->type].video_inputs)
+ int n;
+
+ n = i->index;
+ if (n >= bttv_tvcards[btv->type].video_inputs)
return -EINVAL;
- i->type = V4L2_INPUT_TYPE_CAMERA;
+ memset(i,0,sizeof(*i));
+ i->index = n;
+ i->type = V4L2_INPUT_TYPE_CAMERA;
+ i->audioset = 1;
if (i->index == bttv_tvcards[btv->type].tuner) {
sprintf(i->name, "Television");
i->type = V4L2_INPUT_TYPE_TUNER;
@@ -1530,6 +1546,15 @@
} else {
sprintf(i->name,"Composite%d",i->index);
}
+ if (i->index == btv->input) {
+ __u32 dstatus = btread(BT848_DSTATUS);
+ if (0 == (dstatus & BT848_DSTATUS_PRES))
+ i->status |= V4L2_IN_ST_NO_SIGNAL;
+ if (0 == (dstatus & BT848_DSTATUS_HLOC))
+ i->status |= V4L2_IN_ST_NO_H_LOCK;
+ }
+ for (n = 0; n < BTTV_TVNORMS; n++)
+ i->std |= bttv_tvnorms[n].v4l2_id;
return 0;
}
case VIDIOC_G_INPUT:
@@ -1562,8 +1587,9 @@
down(&btv->lock);
memset(t,0,sizeof(*t));
strcpy(t->name, "Television");
+ t->type = V4L2_TUNER_ANALOG_TV;
t->capability = V4L2_TUNER_CAP_NORM;
- t->rangehigh = 0xffffffffUL;
+ t->rangehigh = 0xffffffffUL;
t->rxsubchans = V4L2_TUNER_SUB_MONO;
if (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC)
t->signal = 0xffff;
@@ -1680,6 +1706,15 @@
if (!fixup && (win->w.width > maxw || win->w.height > maxh))
return -EINVAL;
+ if (1 /* depth < 4bpp */) {
+ /* adjust and align writes */
+ int left = (win->w.left + 3) & ~3;
+ int width = win->w.width & ~3;
+ while (left + width > win->w.left + win->w.width)
+ width -= 4;
+ win->w.left = left;
+ win->w.width = width;
+ }
if (win->w.width > maxw)
win->w.width = maxw;
if (win->w.height > maxh)
@@ -1796,15 +1831,17 @@
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
memset(&f->fmt.pix,0,sizeof(struct v4l2_pix_format));
- f->fmt.pix.width = fh->buf.vb.width;
- f->fmt.pix.height = fh->buf.vb.height;
- f->fmt.pix.pixelformat = fh->buf.fmt->fourcc;
+ f->fmt.pix.width = fh->width;
+ f->fmt.pix.height = fh->height;
+ f->fmt.pix.field = fh->cap.field;
+ f->fmt.pix.pixelformat = fh->fmt->fourcc;
f->fmt.pix.sizeimage =
- (fh->buf.vb.width*fh->buf.vb.height*fh->buf.fmt->depth)/8;
+ (fh->width * fh->height * fh->fmt->depth)/8;
return 0;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
memset(&f->fmt.win,0,sizeof(struct v4l2_window));
- f->fmt.win.w = fh->ov.w;
+ f->fmt.win.w = fh->ov.w;
+ f->fmt.win.field = fh->ov.field;
return 0;
case V4L2_BUF_TYPE_VBI_CAPTURE:
bttv_vbi_fmt(fh,f);
@@ -1866,7 +1903,7 @@
if (f->fmt.pix.height > maxh)
f->fmt.pix.height = maxh;
f->fmt.pix.sizeimage =
- (fh->buf.vb.width * fh->buf.vb.height * fmt->depth)/8;
+ (fh->width * fh->height * fmt->depth)/8;
return 0;
}
@@ -1909,14 +1946,13 @@
/* update our state informations */
down(&fh->cap.lock);
- fh->buf.fmt = fmt;
- fh->buf.vb.field = f->fmt.pix.field;
- fh->buf.vb.width = f->fmt.pix.width;
- fh->buf.vb.height = f->fmt.pix.height;
- btv->init.buf.fmt = fmt;
- btv->init.buf.vb.field = f->fmt.pix.field;
- btv->init.buf.vb.width = f->fmt.pix.width;
- btv->init.buf.vb.height = f->fmt.pix.height;
+ fh->fmt = fmt;
+ fh->cap.field = f->fmt.pix.field;
+ fh->width = f->fmt.pix.width;
+ fh->height = f->fmt.pix.height;
+ btv->init.fmt = fmt;
+ btv->init.width = f->fmt.pix.width;
+ btv->init.height = f->fmt.pix.height;
up(&fh->cap.lock);
return 0;
@@ -1953,7 +1989,7 @@
v4l1_ioctls[_IOC_NR(cmd)] : "???");
break;
case 'V':
- printk("bttv%d: ioctl 0x%x (v4l2, VIDIOC_%s)\n",
+ printk("bttv%d: ioctl 0x%x (v4l2, %s)\n",
btv->nr, cmd, v4l2_ioctl_names[_IOC_NR(cmd)]);
break;
default:
@@ -2002,9 +2038,9 @@
pic->contrast = btv->contrast;
pic->hue = btv->hue;
pic->colour = btv->saturation;
- if (fh->buf.fmt) {
- pic->depth = fh->buf.fmt->depth;
- pic->palette = fh->buf.fmt->palette;
+ if (fh->fmt) {
+ pic->depth = fh->fmt->depth;
+ pic->palette = fh->fmt->palette;
}
return 0;
}
@@ -2021,9 +2057,9 @@
if (fmt->depth != pic->depth && !sloppy)
goto fh_unlock_and_return;
fh->ovfmt = fmt;
- fh->buf.fmt = fmt;
+ fh->fmt = fmt;
btv->init.ovfmt = fmt;
- btv->init.buf.fmt = fmt;
+ btv->init.fmt = fmt;
if (bigendian) {
/* dirty hack time: swap bytes for overlay if the
display adaptor is big endian (insmod option) */
@@ -2067,10 +2103,10 @@
retval = setup_window(fh, btv, &w2, 0);
if (0 == retval) {
/* on v4l1 this ioctl affects the read() size too */
- fh->buf.vb.width = fh->ov.w.width;
- fh->buf.vb.height = fh->ov.w.height;
- btv->init.buf.vb.width = fh->ov.w.width;
- btv->init.buf.vb.height = fh->ov.w.height;
+ fh->width = fh->ov.w.width;
+ fh->height = fh->ov.w.height;
+ btv->init.width = fh->ov.w.width;
+ btv->init.height = fh->ov.w.height;
}
return retval;
}
@@ -2120,10 +2156,10 @@
}
if (NULL == fmt)
goto fh_unlock_and_return;
- fh->ovfmt = fmt;
- fh->buf.fmt = fmt;
- btv->init.ovfmt = fmt;
- btv->init.buf.fmt = fmt;
+ fh->ovfmt = fmt;
+ fh->fmt = fmt;
+ btv->init.ovfmt = fmt;
+ btv->init.fmt = fmt;
} else {
if (15 == fbuf->depth)
fbuf->depth = 16;
@@ -2266,11 +2302,6 @@
case VIDIOCSAUDIO:
return bttv_common_ioctls(btv,cmd,arg);
- /* vbi/teletext ioctls */
- case BTTV_VBISIZE:
- bttv_switch_type(fh,V4L2_BUF_TYPE_VBI_CAPTURE);
- return fh->lines * 2 * 2048;
-
/* *** v4l2 *** ************************************************ */
case VIDIOC_QUERYCAP:
{
@@ -2295,8 +2326,24 @@
case VIDIOC_ENUM_FMT:
{
struct v4l2_fmtdesc *f = arg;
+ enum v4l2_buf_type type;
int i, index;
+ type = f->type;
+ if (V4L2_BUF_TYPE_VBI_CAPTURE == type) {
+ /* vbi */
+ index = f->index;
+ if (0 != index)
+ return -EINVAL;
+ memset(f,0,sizeof(*f));
+ f->index = index;
+ f->type = type;
+ f->pixelformat = V4L2_PIX_FMT_GREY;
+ strcpy(f->description,"vbi data");
+ return 0;
+ }
+
+ /* video capture + overlay */
index = -1;
for (i = 0; i < BTTV_FORMATS; i++) {
if (bttv_formats[i].fourcc != -1)
@@ -2318,9 +2365,10 @@
return -EINVAL;
}
memset(f,0,sizeof(*f));
- f->index = index;
- strncpy(f->description,bttv_formats[i].name,31);
+ f->index = index;
+ f->type = type;
f->pixelformat = bttv_formats[i].fourcc;
+ strncpy(f->description,bttv_formats[i].name,31);
return 0;
}
@@ -2438,7 +2486,6 @@
if (!check_alloc_btres(btv,fh,res))
return -EBUSY;
- bttv_field_count(btv);
return videobuf_streamon(file,bttv_queue(fh));
}
case VIDIOC_STREAMOFF:
@@ -2449,7 +2496,6 @@
if (retval < 0)
return retval;
free_btres(btv,fh,res);
- bttv_field_count(btv);
return 0;
}
@@ -2540,7 +2586,15 @@
static int bttv_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- return video_usercopy(inode, file, cmd, arg, bttv_do_ioctl);
+ struct bttv_fh *fh = file->private_data;
+
+ switch (cmd) {
+ case BTTV_VBISIZE:
+ bttv_switch_type(fh,V4L2_BUF_TYPE_VBI_CAPTURE);
+ return fh->lines * 2 * 2048;
+ default:
+ return video_usercopy(inode, file, cmd, arg, bttv_do_ioctl);
+ }
}
static ssize_t bttv_read(struct file *file, char *data,
@@ -2561,6 +2615,8 @@
retval = videobuf_read_one(file, &fh->cap, data, count, ppos);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
+ if (!check_alloc_btres(fh->btv,fh,RESOURCE_VBI))
+ return -EBUSY;
retval = videobuf_read_stream(file, &fh->vbi, data, count, ppos, 1);
break;
default:
@@ -2574,8 +2630,11 @@
struct bttv_fh *fh = file->private_data;
struct bttv_buffer *buf;
- if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type)
+ if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) {
+ if (!check_alloc_btres(fh->btv,fh,RESOURCE_VBI))
+ return -EBUSY;
return videobuf_poll_stream(file, &fh->vbi, wait);
+ }
if (check_btres(fh,RESOURCE_VIDEO)) {
/* streaming capture */
@@ -2596,7 +2655,7 @@
up(&fh->cap.lock);
return POLLERR;
}
- if (0 != fh->cap.ops->buf_prepare(file,fh->cap.read_buf)) {
+ if (0 != fh->cap.ops->buf_prepare(file,fh->cap.read_buf,fh->cap.field)) {
up(&fh->cap.lock);
return POLLERR;
}
@@ -2652,14 +2711,18 @@
videobuf_queue_init(&fh->cap, &bttv_video_qops,
btv->dev, &btv->s_lock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ V4L2_FIELD_INTERLACED,
sizeof(struct bttv_buffer));
videobuf_queue_init(&fh->vbi, &bttv_vbi_qops,
btv->dev, &btv->s_lock,
V4L2_BUF_TYPE_VBI_CAPTURE,
+ V4L2_FIELD_SEQ_TB,
sizeof(struct bttv_buffer));
-
i2c_vidiocschan(btv);
- return 0;
+
+ btv->users++;
+ bttv_field_count(btv);
+ return 0;
}
static int bttv_release(struct inode *inode, struct file *file)
@@ -2667,7 +2730,7 @@
struct bttv_fh *fh = file->private_data;
struct bttv *btv = fh->btv;
- /* turn off overlay, stop outstanding captures */
+ /* turn off overlay */
if (check_btres(fh, RESOURCE_OVERLAY))
bttv_switch_overlay(btv,fh,NULL);
@@ -2675,7 +2738,6 @@
if (check_btres(fh, RESOURCE_VIDEO)) {
videobuf_streamoff(file,&fh->cap);
free_btres(btv,fh,RESOURCE_VIDEO);
- bttv_field_count(btv);
}
if (fh->cap.read_buf) {
buffer_release(file,fh->cap.read_buf);
@@ -2683,13 +2745,19 @@
}
/* stop vbi capture */
- if (fh->vbi.streaming)
- videobuf_streamoff(file,&fh->vbi);
- if (fh->vbi.reading)
- videobuf_read_stop(file,&fh->vbi);
+ if (check_btres(fh, RESOURCE_VBI)) {
+ if (fh->vbi.streaming)
+ videobuf_streamoff(file,&fh->vbi);
+ if (fh->vbi.reading)
+ videobuf_read_stop(file,&fh->vbi);
+ free_btres(btv,fh,RESOURCE_VBI);
+ }
file->private_data = NULL;
kfree(fh);
+
+ btv->users--;
+ bttv_field_count(btv);
return 0;
}
@@ -2719,7 +2787,7 @@
static struct video_device bttv_video_template =
{
.name = "UNSET",
- .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY|
+ type: VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY|
VID_TYPE_CLIPPING|VID_TYPE_SCALES,
.hardware = VID_HARDWARE_BT848,
.fops = &bttv_fops,
@@ -2965,6 +3033,7 @@
{
struct bttv_buffer *o_bottom,*o_top,*o_vcurr;
struct bttv_buffer *capture;
+ dma_addr_t rc;
int irqflags = 0;
struct timeval ts;
@@ -3032,9 +3101,17 @@
}
if (irq_debug)
- printk(KERN_DEBUG
- "bttv: irq top=%p bottom=%p screen=%p vbi=%p\n",
- btv->top,btv->bottom,btv->screen,btv->vcurr);
+ printk(KERN_DEBUG "bttv%d: irq top=0x%08x bottom=0x%08x"
+ " vbi=0x%08x/0x%08x\n", btv->nr,
+ btv->top ? btv->top->top.dma : 0,
+ btv->bottom ? btv->bottom->bottom.dma : 0,
+ btv->vcurr ? btv->vcurr->top.dma : 0,
+ btv->vcurr ? btv->vcurr->bottom.dma : 0);
+
+ rc = btread(BT848_RISC_COUNT);
+ if (rc < btv->main.dma || rc > btv->main.dma + 0x100)
+ printk("bttv%d: Huh? IRQ latency? main=0x%x rc=0x%x\n",
+ btv->nr,btv->main.dma,rc);
/* activate new fields */
bttv_buffer_activate(btv,btv->top,btv->bottom);
@@ -3270,11 +3347,6 @@
goto fail1;
}
- if (-1 != latency) {
- printk(KERN_INFO "bttv%d: setting pci latency timer to %d\n",
- bttv_num,latency);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, latency);
- }
pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision);
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
printk(KERN_INFO "bttv%d: Bt%d (rev %d) at %s, ",
@@ -3315,14 +3387,13 @@
btv->opt_adc_crush = adc_crush;
/* fill struct bttv with some useful defaults */
- btv->init.btv = btv;
- btv->init.ov.w.width = 320;
- btv->init.ov.w.height = 240;
- btv->init.buf.fmt = format_by_palette(VIDEO_PALETTE_RGB24);
- btv->init.buf.vb.width = 320;
- btv->init.buf.vb.height = 240;
- btv->init.buf.vb.field = V4L2_FIELD_BOTTOM;
- btv->init.lines = 16;
+ btv->init.btv = btv;
+ btv->init.ov.w.width = 320;
+ btv->init.ov.w.height = 240;
+ btv->init.fmt = format_by_palette(VIDEO_PALETTE_RGB24);
+ btv->init.width = 320;
+ btv->init.height = 240;
+ btv->init.lines = 16;
btv->input = 0;
/* initialize hardware */
@@ -3341,7 +3412,7 @@
/* interrupt */
btwrite(0xfffffUL, BT848_INT_STAT);
btwrite((btv->triton1) |
- BT848_INT_GPINT|
+ (gpint ? BT848_INT_GPINT : 0) |
BT848_INT_SCERR|
(fdsr ? BT848_INT_FDSR : 0) |
BT848_INT_RISCI|BT848_INT_OCERR|BT848_INT_VPRES|
--- linux-2.5.54/drivers/media/video/bttv-if.c 2003-01-08 10:33:57.000000000 +0100
+++ linux/drivers/media/video/bttv-if.c 2003-01-08 10:59:58.000000000 +0100
@@ -54,7 +54,7 @@
/* gpio ports (IR for example) */
/* see bttv.h for comments */
-int bttv_get_cardinfo(unsigned int card, int *type, int *cardid)
+int bttv_get_cardinfo(unsigned int card, int *type, unsigned *cardid)
{
if (card >= bttv_num) {
return -1;
@@ -194,6 +194,7 @@
return state;
}
+
static int attach_inform(struct i2c_client *client)
{
struct bttv *btv = (struct bttv*)client->adapter->data;
@@ -262,7 +263,7 @@
};
static struct i2c_adapter bttv_i2c_adap_template = {
- .owner = THIS_MODULE,
+ .owner = THIS_MODULE,
.name = "bt848",
.id = I2C_HW_B_BT848,
.client_register = attach_inform,
--- linux-2.5.54/drivers/media/video/bttv-risc.c 2003-01-08 10:34:29.000000000 +0100
+++ linux/drivers/media/video/bttv-risc.c 2003-01-08 10:59:58.000000000 +0100
@@ -453,7 +453,7 @@
int totalwidth = tvnorm->totalwidth;
int scaledtwidth = tvnorm->scaledtwidth;
- if (btv->digital_video) {
+ if (bttv_tvcards[btv->type].muxsel[btv->input] < 0) {
swidth = 720;
totalwidth = 858;
scaledtwidth = 858;
@@ -764,15 +764,15 @@
case V4L2_FIELD_INTERLACED:
bttv_calc_geo(btv,&buf->geo,buf->vb.width,
buf->vb.height,1,buf->tvnorm);
- lines = buf->vb.height >> 1;
- ypadding = buf->vb.width;
+ lines = buf->vb.height >> 1;
+ ypadding = buf->vb.width;
cpadding = buf->vb.width >> buf->fmt->hshift;
bttv_risc_planar(btv,&buf->top,
buf->vb.dma.sglist,
0,buf->vb.width,ypadding,lines,
uoffset,voffset,
buf->fmt->hshift,
- buf->fmt->vshift >> 1,
+ buf->fmt->vshift,
cpadding);
bttv_risc_planar(btv,&buf->bottom,
buf->vb.dma.sglist,
@@ -780,7 +780,7 @@
uoffset+cpadding,
voffset+cpadding,
buf->fmt->hshift,
- buf->fmt->vshift >> 1,
+ buf->fmt->vshift,
cpadding);
break;
default:
--- linux-2.5.54/drivers/media/video/bttv-vbi.c 2003-01-08 10:34:39.000000000 +0100
+++ linux/drivers/media/video/bttv-vbi.c 2003-01-08 10:59:58.000000000 +0100
@@ -65,14 +65,17 @@
static int vbi_buffer_setup(struct file *file, int *count, int *size)
{
struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
if (0 == *count)
*count = vbibufs;
*size = fh->lines * 2 * 2048;
+ dprintk("setup: lines=%d\n",fh->lines);
return 0;
}
-static int vbi_buffer_prepare(struct file *file, struct videobuf_buffer *vb)
+static int vbi_buffer_prepare(struct file *file, struct videobuf_buffer *vb,
+ enum v4l2_field field)
{
struct bttv_fh *fh = file->private_data;
struct bttv *btv = fh->btv;
@@ -90,8 +93,10 @@
goto fail;
}
buf->vb.state = STATE_PREPARED;
- dprintk("buf prepare %p: top=%p bottom=%p\n",
- vb,&buf->top,&buf->bottom);
+ buf->vb.field = field;
+ dprintk("buf prepare %p: top=%p bottom=%p field=%s\n",
+ vb, &buf->top, &buf->bottom,
+ v4l2_field_names[buf->vb.field]);
return 0;
fail:
--- linux-2.5.54/drivers/media/video/bttv.h 2003-01-08 10:33:58.000000000 +0100
+++ linux/drivers/media/video/bttv.h 2003-01-08 10:59:58.000000000 +0100
@@ -90,6 +90,7 @@
#define BTTV_SENSORAY311 0x49
#define BTTV_RV605 0x4a
#define BTTV_WINDVR 0x4c
+#define BTTV_KWORLD 0x4e
#define BTTV_HAUPPAUGEPVR 0x50
#define BTTV_GVBCTV5PCI 0x51
#define BTTV_OSPREY1x0 0x52
@@ -104,6 +105,9 @@
#define BTTV_OSPREY540 0x5b
#define BTTV_OSPREY2000 0x5c
#define BTTV_IDS_EAGLE 0x5d
+#define BTTV_PINNACLESAT 0x5e
+#define BTTV_FORMAC_PROTV 0x5f
+#define BTTV_EURESYS_PICOLO 0x61
/* i2c address list */
#define I2C_TSA5522 0xc2
@@ -132,6 +136,10 @@
#define WINVIEW_PT2254_DATA 0x20
#define WINVIEW_PT2254_STROBE 0x80
+/* digital_mode */
+#define DIGITAL_MODE_VIDEO 1
+#define DIGITAL_MODE_CAMERA 2
+
struct bttv;
struct tvcard
@@ -141,6 +149,7 @@
int audio_inputs;
int tuner;
int svhs;
+ int digital_mode; // DIGITAL_MODE_CAMERA or DIGITAL_MODE_VIDEO
u32 gpiomask;
u32 muxsel[16];
u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
@@ -191,7 +200,8 @@
for possible values see lines below beginning with #define BTTV_UNKNOWN
returns negative value if error occurred
*/
-extern int bttv_get_cardinfo(unsigned int card, int *type, int *cardid);
+extern int bttv_get_cardinfo(unsigned int card, int *type,
+ unsigned int *cardid);
extern struct pci_dev* bttv_get_pcidev(unsigned int card);
/* obsolete, use bttv_get_cardinfo instead */
--- linux-2.5.54/drivers/media/video/bttvp.h 2003-01-08 10:34:21.000000000 +0100
+++ linux/drivers/media/video/bttvp.h 2003-01-08 10:59:58.000000000 +0100
@@ -24,7 +24,7 @@
#ifndef _BTTVP_H_
#define _BTTVP_H_
-#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,1)
+#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,4)
#include <linux/types.h>
#include <linux/wait.h>
@@ -55,7 +55,7 @@
#define RESOURCE_OVERLAY 1
#define RESOURCE_VIDEO 2
-#define RESOURCE_VBI 3
+#define RESOURCE_VBI 4
#define RAW_LINES 640
#define RAW_BPL 1024
@@ -136,7 +136,10 @@
/* video capture */
struct videobuf_queue cap;
- struct bttv_buffer buf;
+ /* struct bttv_buffer buf; */
+ const struct bttv_format *fmt;
+ int width;
+ int height;
/* current settings */
const struct bttv_format *ovfmt;
@@ -255,7 +258,7 @@
/* card configuration info */
unsigned int nr; /* dev nr (for printk("bttv%d: ..."); */
char name[8]; /* dev name */
- int cardid; /* pci subsystem id (bt878 based ones) */
+ unsigned int cardid; /* pci subsystem id (bt878 based ones) */
int type; /* card type (pointer into tvcards[]) */
int tuner_type; /* tuner chip type */
struct bttv_pll_info pll;
@@ -291,7 +294,6 @@
int tvnorm,hue,contrast,bright,saturation;
struct video_buffer fbuf;
int field_count;
- int digital_video;
/* various options */
int opt_combfilter;
@@ -334,7 +336,7 @@
struct timer_list timeout;
int errors;
- int user;
+ int users;
struct bttv_fh init;
};
--
Weil die späten Diskussionen nicht mal mehr den Rotwein lohnen.
-- Wacholder in "Melanie"
reply other threads:[~2003-01-08 11:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030108115925.GA12607@bytesex.org \
--to=kraxel@bytesex.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.