From: Ladislav Michl <ladis@psi.cz>
To: linux-mips <linux-mips@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>, Guido Guenther <agx@sigxcpu.org>
Subject: [PATCH] proper bus error handling for IP22
Date: Wed, 8 Jan 2003 13:41:38 +0100 [thread overview]
Message-ID: <20030108134138.B17162@erebor.psi.cz> (raw)
This patch makes get_dbe/put_dbe useable. Additionaly prints some useful
informations on bus error. Depends on GIO interface removing patch.
ladis
Index: arch/mips/sgi-ip22/ip22-berr.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/sgi-ip22/ip22-berr.c,v
retrieving revision 1.1.2.2
diff -u -r1.1.2.2 ip22-berr.c
--- arch/mips/sgi-ip22/ip22-berr.c 5 Aug 2002 23:53:35 -0000 1.1.2.2
+++ arch/mips/sgi-ip22/ip22-berr.c 8 Jan 2003 12:22:32 -0000
@@ -15,12 +15,11 @@
#include <asm/sgi/sgimc.h>
#include <asm/sgi/sgihpc.h>
-unsigned int cpu_err_stat; /* Status reg for CPU */
-unsigned int gio_err_stat; /* Status reg for GIO */
-unsigned int cpu_err_addr; /* Error address reg for CPU */
-unsigned int gio_err_addr; /* Error address reg for GIO */
-volatile int nofault;
+static unsigned int cpu_err_stat; /* Status reg for CPU */
+static unsigned int gio_err_stat; /* Status reg for GIO */
+static unsigned int cpu_err_addr; /* Error address reg for CPU */
+static unsigned int gio_err_addr; /* Error address reg for GIO */
static void save_and_clear_buserr(void)
{
@@ -33,6 +32,35 @@
mcmisc_regs->cstat = mcmisc_regs->gstat = 0;
}
+#define GIO_ERRMASK 0xff00
+#define CPU_ERRMASK 0x3f00
+
+static void print_buserr(void)
+{
+ if (cpu_err_stat & CPU_ERRMASK)
+ printk(KERN_ALERT "CPU Error/Addr 0x%x<%s%s%s%s%s%s> 0x%08x\n",
+ cpu_err_stat,
+ cpu_err_stat & SGIMC_CSTAT_RD ? "RD " : "",
+ cpu_err_stat & SGIMC_CSTAT_PAR ? "PAR " : "",
+ cpu_err_stat & SGIMC_CSTAT_ADDR ? "ADDR " : "",
+ cpu_err_stat & SGIMC_CSTAT_SYSAD_PAR ? "SYSAD " : "",
+ cpu_err_stat & SGIMC_CSTAT_SYSCMD_PAR ? "SYSCMD " : "",
+ cpu_err_stat & SGIMC_CSTAT_BAD_DATA ? "BAD_DATA " : "",
+ cpu_err_addr);
+ if (gio_err_stat & GIO_ERRMASK)
+ printk(KERN_ALERT "GIO Error/Addr 0x%x:<%s%s%s%s%s%s%s%s> 0x08%x\n",
+ gio_err_stat,
+ gio_err_stat & SGIMC_GSTAT_RD ? "RD " : "",
+ gio_err_stat & SGIMC_GSTAT_WR ? "WR " : "",
+ gio_err_stat & SGIMC_GSTAT_TIME ? "TIME " : "",
+ gio_err_stat & SGIMC_GSTAT_PROM ? "PROM " : "",
+ gio_err_stat & SGIMC_GSTAT_ADDR ? "ADDR " : "",
+ gio_err_stat & SGIMC_GSTAT_BC ? "BC " : "",
+ gio_err_stat & SGIMC_GSTAT_PIO_RD ? "PIO_RD " : "",
+ gio_err_stat & SGIMC_GSTAT_PIO_WR ? "PIO_WR " : "",
+ gio_err_addr);
+}
+
/*
* MC sends an interrupt whenever bus or parity errors occur. In addition,
* if the error happened during a CPU read, it also asserts the bus error
@@ -43,33 +71,18 @@
void be_ip22_interrupt(int irq, struct pt_regs *regs)
{
save_and_clear_buserr();
- printk(KERN_ALERT "Bus error, epc == %08lx, ra == %08lx\n",
- regs->cp0_epc, regs->regs[31]);
- die_if_kernel("Oops", regs);
- force_sig(SIGBUS, current);
+ print_buserr();
+ panic("Bus error, epc == %08lx, ra == %08lx\n",
+ regs->cp0_epc, regs->regs[31]);
}
int be_ip22_handler(struct pt_regs *regs, int is_fixup)
{
save_and_clear_buserr();
- if (nofault) {
- nofault = 0;
- compute_return_epc(regs);
- return MIPS_BE_DISCARD;
- }
- return MIPS_BE_FIXUP;
-}
-
-int ip22_baddr(unsigned int *val, unsigned long addr)
-{
- nofault = 1;
- *val = *(volatile unsigned int *) addr;
- __asm__ __volatile__("nop;nop;nop;nop");
- if (nofault) {
- nofault = 0;
- return 0;
- }
- return -EFAULT;
+ if (is_fixup)
+ return MIPS_BE_FIXUP;
+ print_buserr();
+ return MIPS_BE_FATAL;
}
void __init bus_error_init(void)
Index: include/asm-mips/sgi/sgimc.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/sgi/sgimc.h,v
retrieving revision 1.5
diff -u -r1.5 sgimc.h
--- include/asm-mips/sgi/sgimc.h 6 Sep 2001 13:12:03 -0000 1.5
+++ include/asm-mips/sgi/sgimc.h 8 Jan 2003 12:22:33 -0000
@@ -15,144 +15,159 @@
struct sgimc_misc_ctrl {
u32 _unused1;
- volatile u32 cpuctrl0; /* CPU control register 0, readwrite */
-#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */
-#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */
-#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */
-#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */
-#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */
-#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */
-#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */
-#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */
-#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */
-#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */
-#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */
-#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */
-#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */
-#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
-#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */
-#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
-#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
-#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
-#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */
+ volatile u32 cpuctrl0; /* CPU control register 0, readwrite */
+#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */
+#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */
+#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */
+#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */
+#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */
+#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */
+#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */
+#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */
+#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */
+#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */
+#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */
+#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */
+#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */
+#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */
+#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_R4KNOPAR 0x04000000 /* Don't chk parity on mem data reads */
+#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */
u32 _unused2;
- volatile u32 cpuctrl1; /* CPU control register 1, readwrite */
-#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */
-#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */
-#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */
-#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
-#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
-#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
-#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
+ volatile u32 cpuctrl1; /* CPU control register 1, readwrite */
+#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */
+#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */
+#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */
+#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
u32 _unused3;
- volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
+ volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
u32 _unused4;
- volatile u32 systemid; /* MC system ID register, readonly */
-#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */
-#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */
+ volatile u32 systemid; /* MC system ID register, readonly */
+#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */
+#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */
u32 _unused5[3];
- volatile u32 divider; /* Divider reg for RPSS */
+ volatile u32 divider; /* Divider reg for RPSS */
u32 _unused6;
- volatile unsigned char eeprom; /* EEPROM byte reg for r4k */
-#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */
-#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */
-#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */
-#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */
-#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */
+ volatile unsigned char eeprom; /* EEPROM byte reg for r4k */
+#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */
+#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */
+#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */
+#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */
+#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */
unsigned char _unused7[3];
u32 _unused8[3];
- volatile unsigned short rcntpre; /* Preload refresh counter */
+ volatile unsigned short rcntpre; /* Preload refresh counter */
unsigned short _unused9;
u32 _unused9a;
- volatile unsigned short rcounter; /* Readonly refresh counter */
+ volatile unsigned short rcounter; /* Readonly refresh counter */
unsigned short _unused10;
u32 _unused11[13];
- volatile u32 gioparm; /* Parameter word for GIO64 */
-#define SGIMC_GIOPARM_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */
-#define SGIMC_GIOPARM_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */
-#define SGIMC_GIOPARM_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */
-#define SGIMC_GIOPARM_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */
-#define SGIMC_GIOPARM_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */
-#define SGIMC_GIOPARM_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */
-#define SGIMC_GIOPARM_RTIMEGFX 0x00000040 /* GFX device has realtime attr */
-#define SGIMC_GIOPARM_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */
-#define SGIMC_GIOPARM_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */
-#define SGIMC_GIOPARM_MASTEREISA 0x00000200 /* EISA bus can act as bus master */
-#define SGIMC_GIOPARM_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */
-#define SGIMC_GIOPARM_MASTERGFX 0x00000800 /* GFX can act as a bus master */
-#define SGIMC_GIOPARM_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */
-#define SGIMC_GIOPARM_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */
-#define SGIMC_GIOPARM_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */
-#define SGIMC_GIOPARM_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */
+ volatile u32 gioparm; /* Parameter word for GIO64 */
+#define SGIMC_GIOPARM_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */
+#define SGIMC_GIOPARM_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */
+#define SGIMC_GIOPARM_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */
+#define SGIMC_GIOPARM_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */
+#define SGIMC_GIOPARM_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */
+#define SGIMC_GIOPARM_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */
+#define SGIMC_GIOPARM_RTIMEGFX 0x00000040 /* GFX device has realtime attr */
+#define SGIMC_GIOPARM_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */
+#define SGIMC_GIOPARM_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */
+#define SGIMC_GIOPARM_MSTREISA 0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPARM_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */
+#define SGIMC_GIOPARM_MSTRGFX 0x00000800 /* GFX can act as a bus master */
+#define SGIMC_GIOPARM_MSTREXP0 0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPARM_MSTREXP1 0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPARM_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */
+#define SGIMC_GIOPARM_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */
u32 _unused13;
- volatile unsigned short cputp; /* CPU bus arb time period */
+ volatile unsigned short cputp; /* CPU bus arb time period */
unsigned short _unused14;
u32 _unused15[3];
- volatile unsigned short lbursttp; /* Time period for long bursts */
+ volatile unsigned short lbursttp; /* Time period for long bursts */
unsigned short _unused16;
u32 _unused17[9];
- volatile u32 mconfig0; /* Memory config register zero */
+ volatile u32 mconfig0; /* Memory config register zero */
u32 _unused18;
- volatile u32 mconfig1; /* Memory config register one */
+ volatile u32 mconfig1; /* Memory config register one */
- /* These defines apply to both mconfig registers above. */
-#define SGIMC_MCONFIG_FOURMB 0x00000000 /* Physical ram = 4megs */
-#define SGIMC_MCONFIG_EIGHTMB 0x00000100 /* Physical ram = 8megs */
-#define SGIMC_MCONFIG_SXTEENMB 0x00000300 /* Physical ram = 16megs */
-#define SGIMC_MCONFIG_TTWOMB 0x00000700 /* Physical ram = 32megs */
-#define SGIMC_MCONFIG_SFOURMB 0x00000f00 /* Physical ram = 64megs */
-#define SGIMC_MCONFIG_OTEIGHTMB 0x00001f00 /* Physical ram = 128megs */
-#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */
+ /* These defines apply to both mconfig registers above. */
+#define SGIMC_MCONFIG_FOURMB 0x00000000 /* Physical ram = 4megs */
+#define SGIMC_MCONFIG_EIGHTMB 0x00000100 /* Physical ram = 8megs */
+#define SGIMC_MCONFIG_SXTEENMB 0x00000300 /* Physical ram = 16megs */
+#define SGIMC_MCONFIG_TTWOMB 0x00000700 /* Physical ram = 32megs */
+#define SGIMC_MCONFIG_SFOURMB 0x00000f00 /* Physical ram = 64megs */
+#define SGIMC_MCONFIG_OTEIGHTMB 0x00001f00 /* Physical ram = 128megs */
+#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */
u32 _unused19;
- volatile u32 cmacc; /* Mem access config for CPU */
+ volatile u32 cmacc; /* Mem access config for CPU */
u32 _unused20;
- volatile u32 gmacc; /* Mem access config for GIO */
+ volatile u32 gmacc; /* Mem access config for GIO */
/* This define applies to both cmacc and gmacc registers above. */
-#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */
+#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */
/* Error address/status regs from GIO and CPU perspectives. */
u32 _unused21;
- volatile u32 cerr; /* Error address reg for CPU */
+ volatile u32 cerr; /* Error address reg for CPU */
u32 _unused22;
- volatile u32 cstat; /* Status reg for CPU */
+ volatile u32 cstat; /* Status reg for CPU */
+#define SGIMC_CSTAT_RD 0x00000100 /* read parity error */
+#define SGIMC_CSTAT_PAR 0x00000200 /* CPU parity error */
+#define SGIMC_CSTAT_ADDR 0x00000400 /* memory bus error bad addr */
+#define SGIMC_CSTAT_SYSAD_PAR 0x00000800 /* sysad parity error */
+#define SGIMC_CSTAT_SYSCMD_PAR 0x00001000 /* syscmd parity error */
+#define SGIMC_CSTAT_BAD_DATA 0x00002000 /* bad data identifier */
+#define SGIMC_CSTAT_PAR_MASK 0x00001f00 /* parity error mask */
+#define SGIMC_CSTAT_RD_PAR (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)
u32 _unused23;
- volatile u32 gerr; /* Error address reg for GIO */
+ volatile u32 gerr; /* Error address reg for GIO */
u32 _unused24;
- volatile u32 gstat; /* Status reg for GIO */
-
+ volatile u32 gstat; /* Status reg for GIO */
+#define SGIMC_GSTAT_RD 0x00000100 /* read parity error */
+#define SGIMC_GSTAT_WR 0x00000200 /* write parity error */
+#define SGIMC_GSTAT_TIME 0x00000400 /* GIO bus timed out */
+#define SGIMC_GSTAT_PROM 0x00000800 /* write to PROM when PROM_EN not set */
+#define SGIMC_GSTAT_ADDR 0x00001000 /* parity error on addr cycle */
+#define SGIMC_GSTAT_BC 0x00002000 /* parity error on byte count cycle */
+#define SGIMC_GSTAT_PIO_RD 0x00004000 /* read data parity on pio */
+#define SGIMC_GSTAT_PIO_WR 0x00008000 /* write data parity on pio */
/* Special hard bus locking registers. */
u32 _unused25;
- volatile unsigned char syssembit; /* Uni-bit system semaphore */
+ volatile unsigned char syssembit; /* Uni-bit system semaphore */
unsigned char _unused26[3];
u32 _unused27;
- volatile unsigned char mlock; /* Global GIO memory access lock */
+ volatile unsigned char mlock; /* Global GIO memory access lock */
unsigned char _unused28[3];
u32 _unused29;
- volatile unsigned char elock; /* Locks EISA from GIO accesses */
+ volatile unsigned char elock; /* Locks EISA from GIO accesses */
/* GIO dma control registers. */
unsigned char _unused30[3];
u32 _unused31[14];
- volatile u32 gio_dma_trans;/* DMA mask to translation GIO addrs */
+ volatile u32 gio_dma_trans; /* DMA mask to translation GIO addrs */
u32 _unused32;
- volatile u32 gio_dma_sbits;/* DMA GIO addr substitution bits */
+ volatile u32 gio_dma_sbits; /* DMA GIO addr substitution bits */
u32 _unused33;
- volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */
+ volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */
u32 _unused34;
- volatile u32 dma_ctrl; /* Main DMA control reg */
+ volatile u32 dma_ctrl; /* Main DMA control reg */
/* DMA TLB entry 0 */
u32 _unused35;
@@ -181,47 +196,47 @@
/* MC misc control registers live at physical 0x1fa00000. */
extern struct sgimc_misc_ctrl *mcmisc_regs;
-extern u32 *rpsscounter; /* Chirps at 100ns */
+extern u32 *rpsscounter; /* Chirps at 100ns */
struct sgimc_dma_ctrl {
u32 _unused1;
- volatile u32 maddronly; /* Address DMA goes at */
+ volatile u32 maddronly; /* Address DMA goes at */
u32 _unused2;
- volatile u32 maddrpdeflts; /* Same as above, plus set defaults */
+ volatile u32 maddrpdeflts; /* Same as above, plus set defaults */
u32 _unused3;
- volatile u32 dmasz; /* DMA count */
+ volatile u32 dmasz; /* DMA count */
u32 _unused4;
- volatile u32 ssize; /* DMA stride size */
+ volatile u32 ssize; /* DMA stride size */
u32 _unused5;
- volatile u32 gmaddronly; /* Set GIO DMA but do not start trans */
+ volatile u32 gmaddronly; /* Set GIO DMA but do not start trans */
u32 _unused6;
- volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */
+ volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */
u32 _unused7;
- volatile u32 dmamode; /* DMA mode config bit settings */
+ volatile u32 dmamode; /* DMA mode config bit settings */
u32 _unused8;
- volatile u32 dmaccount; /* Zoom and byte count for DMA */
+ volatile u32 dmaccount; /* Zoom and byte count for DMA */
u32 _unused9;
- volatile u32 dmastart; /* Pedal to the metal. */
+ volatile u32 dmastart; /* Pedal to the metal. */
u32 _unused10;
- volatile u32 dmarunning; /* DMA op is in progress */
+ volatile u32 dmarunning; /* DMA op is in progress */
u32 _unused11;
/* Set dma addr, defaults, and kick it */
- volatile u32 maddr_defl_go; /* go go go! -lm */
+ volatile u32 maddr_defl_go; /* go go go! -lm */
};
/* MC controller dma regs live at physical 0x1fa02000. */
extern struct sgimc_dma_ctrl *dmactrlregs;
/* Base location of the two ram banks found in IP2[0268] machines. */
-#define SGIMC_SEG0_BADDR 0x08000000
-#define SGIMC_SEG1_BADDR 0x20000000
+#define SGIMC_SEG0_BADDR 0x08000000
+#define SGIMC_SEG1_BADDR 0x20000000
/* Maximum size of the above banks are per machine. */
extern u32 sgimc_seg0_size, sgimc_seg1_size;
-#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */
-#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */
-#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */
+#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */
+#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */
+#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */
extern void sgimc_init(void);
Index: include/asm-mips64/sgi/sgimc.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips64/sgi/sgimc.h,v
retrieving revision 1.3
diff -u -r1.3 sgimc.h
--- include/asm-mips64/sgi/sgimc.h 9 Jul 2001 00:25:38 -0000 1.3
+++ include/asm-mips64/sgi/sgimc.h 8 Jan 2003 12:22:33 -0000
@@ -15,144 +15,159 @@
struct sgimc_misc_ctrl {
u32 _unused1;
- volatile u32 cpuctrl0; /* CPU control register 0, readwrite */
-#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */
-#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */
-#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */
-#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */
-#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */
-#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */
-#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */
-#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */
-#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */
-#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */
-#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */
-#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */
-#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */
-#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
-#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */
-#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
-#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
-#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
-#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */
+ volatile u32 cpuctrl0; /* CPU control register 0, readwrite */
+#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */
+#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */
+#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */
+#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */
+#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */
+#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */
+#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */
+#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */
+#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */
+#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */
+#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */
+#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */
+#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */
+#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */
+#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_R4KNOPAR 0x04000000 /* Don't chk parity on mem data reads */
+#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */
u32 _unused2;
- volatile u32 cpuctrl1; /* CPU control register 1, readwrite */
-#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */
-#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */
-#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */
-#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
-#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
-#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
-#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
+ volatile u32 cpuctrl1; /* CPU control register 1, readwrite */
+#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */
+#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */
+#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */
+#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
u32 _unused3;
- volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
+ volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
u32 _unused4;
- volatile u32 systemid; /* MC system ID register, readonly */
-#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */
-#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */
+ volatile u32 systemid; /* MC system ID register, readonly */
+#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */
+#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */
u32 _unused5[3];
- volatile u32 divider; /* Divider reg for RPSS */
+ volatile u32 divider; /* Divider reg for RPSS */
u32 _unused6;
- volatile unsigned char eeprom; /* EEPROM byte reg for r4k */
-#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */
-#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */
-#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */
-#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */
-#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */
+ volatile unsigned char eeprom; /* EEPROM byte reg for r4k */
+#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */
+#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */
+#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */
+#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */
+#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */
unsigned char _unused7[3];
u32 _unused8[3];
- volatile unsigned short rcntpre; /* Preload refresh counter */
+ volatile unsigned short rcntpre; /* Preload refresh counter */
unsigned short _unused9;
u32 _unused9a;
- volatile unsigned short rcounter; /* Readonly refresh counter */
+ volatile unsigned short rcounter; /* Readonly refresh counter */
unsigned short _unused10;
u32 _unused11[13];
- volatile u32 gioparm; /* Parameter word for GIO64 */
-#define SGIMC_GIOPARM_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */
-#define SGIMC_GIOPARM_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */
-#define SGIMC_GIOPARM_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */
-#define SGIMC_GIOPARM_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */
-#define SGIMC_GIOPARM_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */
-#define SGIMC_GIOPARM_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */
-#define SGIMC_GIOPARM_RTIMEGFX 0x00000040 /* GFX device has realtime attr */
-#define SGIMC_GIOPARM_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */
-#define SGIMC_GIOPARM_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */
-#define SGIMC_GIOPARM_MASTEREISA 0x00000200 /* EISA bus can act as bus master */
-#define SGIMC_GIOPARM_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */
-#define SGIMC_GIOPARM_MASTERGFX 0x00000800 /* GFX can act as a bus master */
-#define SGIMC_GIOPARM_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */
-#define SGIMC_GIOPARM_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */
-#define SGIMC_GIOPARM_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */
-#define SGIMC_GIOPARM_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */
+ volatile u32 gioparm; /* Parameter word for GIO64 */
+#define SGIMC_GIOPARM_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */
+#define SGIMC_GIOPARM_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */
+#define SGIMC_GIOPARM_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */
+#define SGIMC_GIOPARM_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */
+#define SGIMC_GIOPARM_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */
+#define SGIMC_GIOPARM_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */
+#define SGIMC_GIOPARM_RTIMEGFX 0x00000040 /* GFX device has realtime attr */
+#define SGIMC_GIOPARM_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */
+#define SGIMC_GIOPARM_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */
+#define SGIMC_GIOPARM_MSTREISA 0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPARM_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */
+#define SGIMC_GIOPARM_MSTRGFX 0x00000800 /* GFX can act as a bus master */
+#define SGIMC_GIOPARM_MSTREXP0 0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPARM_MSTREXP1 0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPARM_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */
+#define SGIMC_GIOPARM_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */
u32 _unused13;
- volatile unsigned short cputp; /* CPU bus arb time period */
+ volatile unsigned short cputp; /* CPU bus arb time period */
unsigned short _unused14;
u32 _unused15[3];
- volatile unsigned short lbursttp; /* Time period for long bursts */
+ volatile unsigned short lbursttp; /* Time period for long bursts */
unsigned short _unused16;
u32 _unused17[9];
- volatile u32 mconfig0; /* Memory config register zero */
+ volatile u32 mconfig0; /* Memory config register zero */
u32 _unused18;
- volatile u32 mconfig1; /* Memory config register one */
+ volatile u32 mconfig1; /* Memory config register one */
- /* These defines apply to both mconfig registers above. */
-#define SGIMC_MCONFIG_FOURMB 0x00000000 /* Physical ram = 4megs */
-#define SGIMC_MCONFIG_EIGHTMB 0x00000100 /* Physical ram = 8megs */
-#define SGIMC_MCONFIG_SXTEENMB 0x00000300 /* Physical ram = 16megs */
-#define SGIMC_MCONFIG_TTWOMB 0x00000700 /* Physical ram = 32megs */
-#define SGIMC_MCONFIG_SFOURMB 0x00000f00 /* Physical ram = 64megs */
-#define SGIMC_MCONFIG_OTEIGHTMB 0x00001f00 /* Physical ram = 128megs */
-#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */
+ /* These defines apply to both mconfig registers above. */
+#define SGIMC_MCONFIG_FOURMB 0x00000000 /* Physical ram = 4megs */
+#define SGIMC_MCONFIG_EIGHTMB 0x00000100 /* Physical ram = 8megs */
+#define SGIMC_MCONFIG_SXTEENMB 0x00000300 /* Physical ram = 16megs */
+#define SGIMC_MCONFIG_TTWOMB 0x00000700 /* Physical ram = 32megs */
+#define SGIMC_MCONFIG_SFOURMB 0x00000f00 /* Physical ram = 64megs */
+#define SGIMC_MCONFIG_OTEIGHTMB 0x00001f00 /* Physical ram = 128megs */
+#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */
u32 _unused19;
- volatile u32 cmacc; /* Mem access config for CPU */
+ volatile u32 cmacc; /* Mem access config for CPU */
u32 _unused20;
- volatile u32 gmacc; /* Mem access config for GIO */
+ volatile u32 gmacc; /* Mem access config for GIO */
/* This define applies to both cmacc and gmacc registers above. */
-#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */
+#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */
/* Error address/status regs from GIO and CPU perspectives. */
u32 _unused21;
- volatile u32 cerr; /* Error address reg for CPU */
+ volatile u32 cerr; /* Error address reg for CPU */
u32 _unused22;
- volatile u32 cstat; /* Status reg for CPU */
+ volatile u32 cstat; /* Status reg for CPU */
+#define SGIMC_CSTAT_RD 0x00000100 /* read parity error */
+#define SGIMC_CSTAT_PAR 0x00000200 /* CPU parity error */
+#define SGIMC_CSTAT_ADDR 0x00000400 /* memory bus error bad addr */
+#define SGIMC_CSTAT_SYSAD_PAR 0x00000800 /* sysad parity error */
+#define SGIMC_CSTAT_SYSCMD_PAR 0x00001000 /* syscmd parity error */
+#define SGIMC_CSTAT_BAD_DATA 0x00002000 /* bad data identifier */
+#define SGIMC_CSTAT_PAR_MASK 0x00001f00 /* parity error mask */
+#define SGIMC_CSTAT_RD_PAR (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)
u32 _unused23;
- volatile u32 gerr; /* Error address reg for GIO */
+ volatile u32 gerr; /* Error address reg for GIO */
u32 _unused24;
- volatile u32 gstat; /* Status reg for GIO */
-
+ volatile u32 gstat; /* Status reg for GIO */
+#define SGIMC_GSTAT_RD 0x00000100 /* read parity error */
+#define SGIMC_GSTAT_WR 0x00000200 /* write parity error */
+#define SGIMC_GSTAT_TIME 0x00000400 /* GIO bus timed out */
+#define SGIMC_GSTAT_PROM 0x00000800 /* write to PROM when PROM_EN not set */
+#define SGIMC_GSTAT_ADDR 0x00001000 /* parity error on addr cycle */
+#define SGIMC_GSTAT_BC 0x00002000 /* parity error on byte count cycle */
+#define SGIMC_GSTAT_PIO_RD 0x00004000 /* read data parity on pio */
+#define SGIMC_GSTAT_PIO_WR 0x00008000 /* write data parity on pio */
/* Special hard bus locking registers. */
u32 _unused25;
- volatile unsigned char syssembit; /* Uni-bit system semaphore */
+ volatile unsigned char syssembit; /* Uni-bit system semaphore */
unsigned char _unused26[3];
u32 _unused27;
- volatile unsigned char mlock; /* Global GIO memory access lock */
+ volatile unsigned char mlock; /* Global GIO memory access lock */
unsigned char _unused28[3];
u32 _unused29;
- volatile unsigned char elock; /* Locks EISA from GIO accesses */
+ volatile unsigned char elock; /* Locks EISA from GIO accesses */
/* GIO dma control registers. */
unsigned char _unused30[3];
u32 _unused31[14];
- volatile u32 gio_dma_trans;/* DMA mask to translation GIO addrs */
+ volatile u32 gio_dma_trans; /* DMA mask to translation GIO addrs */
u32 _unused32;
- volatile u32 gio_dma_sbits;/* DMA GIO addr substitution bits */
+ volatile u32 gio_dma_sbits; /* DMA GIO addr substitution bits */
u32 _unused33;
- volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */
+ volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */
u32 _unused34;
- volatile u32 dma_ctrl; /* Main DMA control reg */
+ volatile u32 dma_ctrl; /* Main DMA control reg */
/* DMA TLB entry 0 */
u32 _unused35;
@@ -181,47 +196,47 @@
/* MC misc control registers live at physical 0x1fa00000. */
extern struct sgimc_misc_ctrl *mcmisc_regs;
-extern u32 *rpsscounter; /* Chirps at 100ns */
+extern u32 *rpsscounter; /* Chirps at 100ns */
struct sgimc_dma_ctrl {
u32 _unused1;
- volatile u32 maddronly; /* Address DMA goes at */
+ volatile u32 maddronly; /* Address DMA goes at */
u32 _unused2;
- volatile u32 maddrpdeflts; /* Same as above, plus set defaults */
+ volatile u32 maddrpdeflts; /* Same as above, plus set defaults */
u32 _unused3;
- volatile u32 dmasz; /* DMA count */
+ volatile u32 dmasz; /* DMA count */
u32 _unused4;
- volatile u32 ssize; /* DMA stride size */
+ volatile u32 ssize; /* DMA stride size */
u32 _unused5;
- volatile u32 gmaddronly; /* Set GIO DMA but do not start trans */
+ volatile u32 gmaddronly; /* Set GIO DMA but do not start trans */
u32 _unused6;
- volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */
+ volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */
u32 _unused7;
- volatile u32 dmamode; /* DMA mode config bit settings */
+ volatile u32 dmamode; /* DMA mode config bit settings */
u32 _unused8;
- volatile u32 dmacount; /* Zoom and byte count for DMA */
+ volatile u32 dmaccount; /* Zoom and byte count for DMA */
u32 _unused9;
- volatile u32 dmastart; /* Pedal to the metal. */
+ volatile u32 dmastart; /* Pedal to the metal. */
u32 _unused10;
- volatile u32 dmarunning; /* DMA op is in progress */
+ volatile u32 dmarunning; /* DMA op is in progress */
u32 _unused11;
/* Set dma addr, defaults, and kick it */
- volatile u32 maddr_defl_go; /* go go go! -lm */
+ volatile u32 maddr_defl_go; /* go go go! -lm */
};
/* MC controller dma regs live at physical 0x1fa02000. */
extern struct sgimc_dma_ctrl *dmactrlregs;
/* Base location of the two ram banks found in IP2[0268] machines. */
-#define SGIMC_SEG0_BADDR 0x08000000
-#define SGIMC_SEG1_BADDR 0x20000000
+#define SGIMC_SEG0_BADDR 0x08000000
+#define SGIMC_SEG1_BADDR 0x20000000
/* Maximum size of the above banks are per machine. */
extern u32 sgimc_seg0_size, sgimc_seg1_size;
-#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */
-#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */
-#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */
+#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */
+#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */
+#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */
extern void sgimc_init(void);
reply other threads:[~2003-01-08 12:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030108134138.B17162@erebor.psi.cz \
--to=ladis@psi.cz \
--cc=agx@sigxcpu.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.