From: Jean-Louis Bach <torrent@linux.kernel.org>
To: linux-smp@vger.kernel.org
Subject: unexpected IOAPIC
Date: Thu, 9 Jan 2003 21:44:10 +0100 [thread overview]
Message-ID: <200301092144.10327@Torrent> (raw)
[-- Attachment #1: Type: text/plain, Size: 144 bytes --]
Booting makes HDD noisy (clac-clac-clac)
Then maping problem
Var/Log/boot;msg says to send it to you
Jean-Louis Bach
jlbach@ifrance.com
[-- Attachment #2: boot.msg --]
[-- Type: text/plain, Size: 23595 bytes --]
Linux version 2.4.18-64GB-SMP (root@SMP_X86.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 SMP Wed Mar 27 13:58:12 UTC 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
found SMP MP-table at 000fb920
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 196592
zone(0): 4096 pages.
zone(1): 192496 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 2 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=linux ro root=305 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1300.085 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2595.22 BogoMIPS
Memory: 770344k/786368k available (1504k kernel code, 15636k reserved, 429k data, 144k init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU0: AMD Duron(tm) Processor stepping 01
per-CPU timeslice cutoff: 182.78 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-18, 2-20, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178002
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0002
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 001 01 1 1 0 1 0 1 1 99
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 A9
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
IRQ21 -> 0:21
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1300.0614 MHz.
..... host bus clock speed is 200.0094 MHz.
cpu: 0, clocks: 2000094, slice: 1000047
CPU0<T0:2000080,T1:1000032,D:1,S:1000047,C:2000094>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI->APIC IRQ transform: (B0,I5,P0) -> 16
PCI->APIC IRQ transform: (B0,I5,P0) -> 16
PCI->APIC IRQ transform: (B0,I6,P0) -> 17
PCI->APIC IRQ transform: (B0,I8,P0) -> 19
PCI->APIC IRQ transform: (B0,I17,P0) -> 16
PCI->APIC IRQ transform: (B0,I17,P3) -> 21
PCI->APIC IRQ transform: (B0,I17,P3) -> 21
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
mxt_scan_bios: enter
Starting kswapd
kinoded started
VFS: Diskquotas version dquot_6.5.0 initialized
ACPI: APM is already active, exiting
vesafb: framebuffer at 0xda000000, mapped to 0xf080d000, size 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0336
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 42648 bytes).
Console: switching to colour frame buffer device 105x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400BB-00DEA0, ATA DISK drive
hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
hdc: LITE-ON LTR-32125W, ATAPI CD/DVD-ROM drive
hdd: ST340016A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c037ccc4, I/O limit 4095Mb (mask 0xffffffff)
hda: safely enabled flush
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
blk: queue c037d184, I/O limit 4095Mb (mask 0xffffffff)
hdd: safely enabled flush
hdd: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
hdb: no flushcache support
hdb: ATAPI 16X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: [PTBL] [4865/255/63] hdd1 < hdd5 > hdd2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 16 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.99
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing............done.
Freeing initrd memory: 587k freed
VFS: Mounted root (ext2 filesystem).
hdc: no flushcache support
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-32125W Rev: WBS2
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 240x/40x writer cd/rw xa/form2 cdda tray
reiserfs: checking transaction log (device 03:05) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 144k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.3(19/02/2002) module loaded
Adding Swap: 1502068k swap-space (priority 42)
Boot logging started on /dev/tty1(/dev/console) at Thu Jan 9 22:35:26 2003
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
done
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.26 (3-Feb-2002)
Reiserfs super block in block 16 on 0x305 of format 3.6 with standard journal
Blocks (total/free): 7588696/2028724 by 4096 bytes
Filesystem is cleanly umounted
/dev/hda2: clean, 45/12048 files, 5721/48195 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
/dev/hda2 on /boot type ext2 (rw)
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up timezone data
done
Setting up hostname 'linux'
done
Setting up loopback interface
done
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneCreating /var/log/boot.msg
doneEnabling syn flood protection
done
Disabling IP forwarding
done
<notice>killproc: kill(28,29)
Running /etc/init.d/boot.local
Boot logging started on /dev/tty1(/dev/console) at Thu Jan 9 21:35:32 2003
Master Resource Control: previous runlevel: N, switching to runlevel:
5
Starting Firewall Initialization (phase 1 of 3)
done<notice>killproc: kill(28,3)
INIT: Entering runlevel: 5
<notice>/etc/init.d/rc5.d/S01SuSEfirewall2_init start
done
<notice>'/etc/init.d/rc5.d/S01SuSEfirewall2_init start' exits with status 0
<notice>/etc/init.d/rc5.d/S01isdn start
<notice>'/etc/init.d/rc5.d/S01isdn start' exits with status 0
<notice>/etc/init.d/rc5.d/S01personal-firewall.initial start
Starting personal-firewall (initial) [not active]
unused
<notice>'/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generator
done
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network interfaces:
lo
done
eth0
done
ppp0
skipped
INFO: Dont worry about skipped interfaces; they will be set up
dynamically by service pcmcia, hotplug or when dialing.
Starting Firewall Initialization (phase 2 of 3) <notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06SuSEfirewall2_setup start
done
Starting hotplugging services [<notice>'/etc/init.d/rc5.d/S06SuSEfirewall2_setup start' exits with status 0
<notice>/etc/init.d/rc5.d/S06hotplug start
net pci usbinsmod: insmod: a module named sg already exists
insmod: insmod: insmod char-major-21 failed
insmod: insmod: a module named sg already exists
insmod: insmod: insmod char-major-21 failed
insmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o
insmod: insmod: /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o: No such file or directory
insmod: insmod: insmod /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o failed
insmod: insmod: insmod dabusb failed
^G ]
done
<notice>'/etc/init.d/rc5.d/S06hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S07hwscan start
Starting hardware scan on bootinsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/scanner.o
insmod: Symbol version prefix 'smp_'
^Ginsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/storage/usb-storage.o
insmod: Symbol version prefix 'smp_'
^G<notice>'/etc/init.d/rc5.d/S07hwscan start' exits with status 0
<notice>/etc/init.d/rc5.d/S07portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S07portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S07splash_early start
<notice>'/etc/init.d/rc5.d/S07splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S07sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S07sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S08nfs start
<notice>'/etc/init.d/rc5.d/S08nfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S09alsasound start
Starting sound driver: es1968
done
Restoring the previous sound setting
done
<notice>'/etc/init.d/rc5.d/S09alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S09amavis start
Starting virus-scanning for sendmail (amavis)
done
<notice>'/etc/init.d/rc5.d/S09amavis start' exits with status 0
<notice>/etc/init.d/rc5.d/S09atd start
Starting service at daemon
done
<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
<notice>'/etc/init.d/rc5.d/S09atd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09fbset start
<notice>'/etc/init.d/rc5.d/S09fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S09lpd start
Starting lpdinsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/media/video/videodev.o
insmod: Symbol version prefix 'smp_'
insmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/ov511.o
^G<notice>startproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/lpd ]
done
<notice>'/etc/init.d/rc5.d/S09lpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09postfix start
Starting mail service (Postfix)
done
<notice>'/etc/init.d/rc5.d/S09postfix start' exits with status 0
<notice>/etc/init.d/rc5.d/S09suse-blinux start
Starting suse-blinux
<notice>startproc: execve (/usr/lib/suse-blinux/sbl) [ /usr/lib/suse-blinux/sbl ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/lib/suse-blinux/sbl ]
done
<notice>'/etc/init.d/rc5.d/S09suse-blinux start' exits with status 0
<notice>/etc/init.d/rc5.d/S10kbd start
suse-blinux version 1.4
copyright (c) 2000-2002 SuSE GmbH, Nuernberg
Author: Marco Skambraks <marco@suse.de>
Braillex 2d-screen on /dev/ttyS0
Loading keymap azerty/fr-latin1.map.gz
doneLoading compose table winkeys shiftctrl latin1.add
done
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S10kbd start' exits with status 0
Initializing SMTP port (sendmail)<notice>/etc/init.d/rc5.d/S10sendmail start
<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
sendmail: invalid option -- O
sendmail: fatal: usage: sendmail [options]
sendmail: invalid option -- A
sendmail: fatal: usage: sendmail [options]
done
<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -q30m ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
<notice>'/etc/init.d/rc5.d/S10sendmail start' exits with status 0
<notice>/etc/init.d/rc5.d/S10smbfs start
<notice>'/etc/init.d/rc5.d/S10smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S10soundmodem start
<notice>'/etc/init.d/rc5.d/S10soundmodem start' exits with status 0
<notice>/etc/init.d/rc5.d/S10splash start
<notice>'/etc/init.d/rc5.d/S10splash start' exits with status 0
<notice>/etc/init.d/rc5.d/S10xdm start
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ PWD=/ LC_MESSAGES= HOSTNAME=linux CONSOLE=/dev/console RC_LANG=fr_FR@euro PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 QTDIR=/usr/lib/qt3 KDEROOTHOME=/root/.kdm LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=34 MAXHOME=/usr/lib/maxwell LANG=fr_FR@euro LC_NUMERIC= SHLVL=2 COLUMNS=105 LC_CTYPE=fr_FR@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.82 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>'/etc/init.d/rc5.d/S10xdm start' exits with status 0
<notice>/etc/init.d/rc5.d/S11cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
^G
done
Starting Name Service Cache Daemon<notice>'/etc/init.d/rc5.d/S11cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S11nscd start
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S11nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11smpppd start
Starting SMPPPD<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
done
<notice>'/etc/init.d/rc5.d/S11smpppd start' exits with status 0
<notice>/etc/init.d/rc5.d/S20inetd start
Starting inetd<notice>startproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/inetd ]
done
<notice>'/etc/init.d/rc5.d/S20inetd start' exits with status 0
Starting personal-firewall (final) [not active]
unused
<notice>/etc/init.d/rc5.d/S21personal-firewall.final start
<notice>'/etc/init.d/rc5.d/S21personal-firewall.final start' exits with status 6
<notice>/etc/init.d/rc5.d/S22splash_late start
<notice>'/etc/init.d/rc5.d/S22splash_late start' exits with status 0
<notice>/etc/init.d/rc5.d/S23SuSEfirewall2_final start
Starting Firewall Initialization (phase 3 of 3) Warning: No nameservers in /etc/resolv.conf!
done
Master Resource Control: runlevel 5 has been
reached
Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final
<notice>'/etc/init.d/rc5.d/S23SuSEfirewall2_final start' exits with status 0
<notice>killproc: kill(264,3)
reply other threads:[~2003-01-09 20:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200301092144.10327@Torrent \
--to=torrent@linux.kernel.org \
--cc=jlbach@ifrance.com \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.