From: Dominik Brodowski <linux@brodo.de>
To: torvalds@transmeta.com
Cc: linux-kernel@vger.kernel.org, cpufreq@www.linux.org.uk
Subject: [PATCH 2.5.56] cpufreq: frequency table helpers
Date: Fri, 10 Jan 2003 22:45:30 +0100 [thread overview]
Message-ID: <20030110214530.GA1148@brodo.de> (raw)
This patch adds "frequency table helpers" to kernel/cpufreq.c and
updates some drivers to use them.
Most CPU frequency scaling methods only support a few static
frequencies. In these drivers a lot of duplicated code existed in the
->setpolicy and ->verify calls.
Please note that this in no way changes the behaviour of cpufreq or of
the ->setpolicy or ->verify calls. These "frequency table helpers"
aren't for drivers which either only support policies (longrun) or
really many frequency states (ARM, gx-suspmod).
Dominik
arch/i386/kernel/cpu/cpufreq/elanfreq.c | 83 ++++++-------------
arch/i386/kernel/cpu/cpufreq/p4-clockmod.c | 97 +++++++----------------
arch/i386/kernel/cpu/cpufreq/powernow-k6.c | 122 ++++++++---------------------
arch/i386/kernel/cpu/cpufreq/speedstep.c | 57 +++++--------
include/linux/cpufreq.h | 23 +++++
kernel/cpufreq.c | 117 +++++++++++++++++++++++++++
6 files changed, 257 insertions(+), 242 deletions(-)
diff -ruN linux-original/arch/i386/kernel/cpu/cpufreq/elanfreq.c linux/arch/i386/kernel/cpu/cpufreq/elanfreq.c
--- linux-original/arch/i386/kernel/cpu/cpufreq/elanfreq.c 2003-01-10 21:55:28.000000000 +0100
+++ linux/arch/i386/kernel/cpu/cpufreq/elanfreq.c 2003-01-10 22:16:10.000000000 +0100
@@ -61,6 +61,18 @@
{99000, 0x01, 0x05}
};
+static struct cpufreq_frequency_table elanfreq_table[] = {
+ {0, 1000},
+ {1, 2000},
+ {2, 4000},
+ {3, 8000},
+ {4, 16000},
+ {5, 33000},
+ {6, 66000},
+ {7, 99000},
+ {0, CPUFREQ_TABLE_END},
+};
+
/**
* elanfreq_get_cpu_frequency: determine current cpu speed
@@ -172,63 +184,17 @@
static int elanfreq_verify (struct cpufreq_policy *policy)
{
- unsigned int number_states = 0;
- unsigned int i;
-
- if (!policy || !max_freq)
- return -EINVAL;
-
- policy->cpu = 0;
-
- cpufreq_verify_within_limits(policy, 1000, max_freq);
-
- for (i=7; i>=0; i--)
- if ((elan_multiplier[i].clock >= policy->min) &&
- (elan_multiplier[i].clock <= policy->max))
- number_states++;
-
- if (number_states)
- return 0;
-
- for (i=7; i>=0; i--)
- if (elan_multiplier[i].clock < policy->max)
- break;
-
- policy->max = elan_multiplier[i+1].clock;
-
- cpufreq_verify_within_limits(policy, 1000, max_freq);
-
- return 0;
+ return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
}
static int elanfreq_setpolicy (struct cpufreq_policy *policy)
{
- unsigned int i;
- unsigned int optimal = 8;
-
- if (!elanfreq_driver)
- return -EINVAL;
+ unsigned int newstate = 0;
- for (i=0; i<8; i++) {
- if ((elan_multiplier[i].clock > policy->max) ||
- (elan_multiplier[i].clock < policy->min))
- continue;
- switch(policy->policy) {
- case CPUFREQ_POLICY_POWERSAVE:
- if (optimal == 8)
- optimal = i;
- break;
- case CPUFREQ_POLICY_PERFORMANCE:
- optimal = i;
- break;
- default:
- return -EINVAL;
- }
- }
- if ((optimal == 8) || (elan_multiplier[optimal].clock > max_freq))
+ if (cpufreq_frequency_table_setpolicy(policy, &elanfreq_table[0], &newstate))
return -EINVAL;
- elanfreq_set_cpu_state(optimal);
+ elanfreq_set_cpu_state(newstate);
return 0;
}
@@ -262,7 +228,7 @@
{
struct cpuinfo_x86 *c = cpu_data;
struct cpufreq_driver *driver;
- int ret;
+ int ret, i;
/* Test if we have the right hardware */
if ((c->x86_vendor != X86_VENDOR_AMD) ||
@@ -282,6 +248,12 @@
if (!max_freq)
max_freq = elanfreq_get_cpu_frequency();
+ /* table init */
+ for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if (elanfreq_table[i].frequency > max_freq)
+ elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ }
+
#ifdef CONFIG_CPU_FREQ_24_API
driver->cpu_cur_freq[0] = elanfreq_get_cpu_frequency();
#endif
@@ -290,11 +262,12 @@
driver->setpolicy = &elanfreq_setpolicy;
driver->policy[0].cpu = 0;
- driver->policy[0].min = 1000;
- driver->policy[0].max = max_freq;
+ ret = cpufreq_frequency_table_cpuinfo(&driver->policy[0], &elanfreq_table[0]);
+ if (ret) {
+ kfree(driver);
+ return ret;
+ }
driver->policy[0].policy = CPUFREQ_POLICY_PERFORMANCE;
- driver->policy[0].cpuinfo.max_freq = max_freq;
- driver->policy[0].cpuinfo.min_freq = 1000;
driver->policy[0].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
elanfreq_driver = driver;
diff -ruN linux-original/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c linux/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
--- linux-original/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c 2003-01-10 21:55:28.000000000 +0100
+++ linux/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c 2003-01-10 22:16:10.000000000 +0100
@@ -141,39 +141,27 @@
}
+static struct cpufreq_frequency_table p4clockmod_table[] = {
+ {DC_RESV, CPUFREQ_ENTRY_INVALID},
+ {DC_DFLT, 0},
+ {DC_25PT, 0},
+ {DC_38PT, 0},
+ {DC_50PT, 0},
+ {DC_64PT, 0},
+ {DC_75PT, 0},
+ {DC_88PT, 0},
+ {DC_DISABLE, 0},
+ {DC_RESV, CPUFREQ_TABLE_END},
+};
+
+
static int cpufreq_p4_setpolicy(struct cpufreq_policy *policy)
{
- unsigned int i;
- unsigned int newstate = 0;
- unsigned int number_states = 0;
- unsigned int minstate = 1;
+ unsigned int newstate = DC_RESV;
- if (!cpufreq_p4_driver || !stock_freq ||
- !policy || !cpu_online(policy->cpu))
+ if (cpufreq_frequency_table_setpolicy(policy, &p4clockmod_table[0], &newstate))
return -EINVAL;
- if (has_N44_O17_errata)
- minstate = 3;
-
- if (policy->policy == CPUFREQ_POLICY_POWERSAVE)
- {
- for (i=8; i>=minstate; i--)
- if ((policy->min <= ((stock_freq / 8) * i)) &&
- (policy->max >= ((stock_freq / 8) * i)))
- {
- newstate = i;
- number_states++;
- }
- } else {
- for (i=minstate; i<=8; i++)
- if ((policy->min <= ((stock_freq / 8) * i)) &&
- (policy->max >= ((stock_freq / 8) * i)))
- {
- newstate = i;
- number_states++;
- }
- }
-
cpufreq_p4_setdc(policy->cpu, newstate);
return 0;
@@ -182,34 +170,7 @@
static int cpufreq_p4_verify(struct cpufreq_policy *policy)
{
- unsigned int number_states = 0;
- unsigned int i = 1;
-
- if (!cpufreq_p4_driver || !stock_freq ||
- !policy || !cpu_online(policy->cpu))
- return -EINVAL;
-
- cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq,
- policy->cpuinfo.max_freq);
-
- if (has_N44_O17_errata)
- i = 3;
-
- /* is there at least one state within the limit? */
- for (; i<=8; i++)
- if ((policy->min <= ((stock_freq / 8) * i)) &&
- (policy->max >= ((stock_freq / 8) * i)))
- number_states++;
-
- if (number_states)
- return 0;
-
- policy->max = (stock_freq / 8) * (((unsigned int) ((policy->max * 8) / stock_freq)) + 1);
- cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq,
- policy->cpuinfo.max_freq);
- return 0;
+ return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]);
}
@@ -262,6 +223,15 @@
driver->policy = (struct cpufreq_policy *) (driver + 1);
+ /* table init */
+ for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if ((i<2) && (has_N44_O17_errata))
+ p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ else
+ p4clockmod_table[i].frequency = (stock_freq * i)/8;
+ }
+
+
#ifdef CONFIG_CPU_FREQ_24_API
for (i=0;i<NR_CPUS;i++) {
driver->cpu_cur_freq[i] = stock_freq;
@@ -272,17 +242,14 @@
driver->setpolicy = &cpufreq_p4_setpolicy;
for (i=0;i<NR_CPUS;i++) {
- if (has_N44_O17_errata)
- driver->policy[i].min = (stock_freq * 3) / 8;
- else
- driver->policy[i].min = stock_freq / 8;
- driver->policy[i].max = stock_freq;
+ driver->policy[i].cpu = i;
+ ret = cpufreq_frequency_table_cpuinfo(&driver->policy[i], &p4clockmod_table[0]);
+ if (ret) {
+ kfree(driver);
+ return ret;
+ }
driver->policy[i].policy = CPUFREQ_POLICY_PERFORMANCE;
- driver->policy[i].cpuinfo.min_freq = driver->policy[i].min;
- driver->policy[i].cpuinfo.max_freq = stock_freq;
driver->policy[i].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-
- driver->policy[i].cpu = i;
}
cpufreq_p4_driver = driver;
diff -ruN linux-original/arch/i386/kernel/cpu/cpufreq/powernow-k6.c linux/arch/i386/kernel/cpu/cpufreq/powernow-k6.c
--- linux-original/arch/i386/kernel/cpu/cpufreq/powernow-k6.c 2003-01-10 21:55:28.000000000 +0100
+++ linux/arch/i386/kernel/cpu/cpufreq/powernow-k6.c 2003-01-10 22:16:10.000000000 +0100
@@ -31,15 +31,16 @@
/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
-static int clock_ratio[8] = {
- 45, /* 000 -> 4.5x */
- 50, /* 001 -> 5.0x */
- 40, /* 010 -> 4.0x */
- 55, /* 011 -> 5.5x */
- 20, /* 100 -> 2.0x */
- 30, /* 101 -> 3.0x */
- 60, /* 110 -> 6.0x */
- 35 /* 111 -> 3.5x */
+static struct cpufreq_frequency_table clock_ratio[] = {
+ {45, /* 000 -> 4.5x */ 0},
+ {50, /* 001 -> 5.0x */ 0},
+ {40, /* 010 -> 4.0x */ 0},
+ {55, /* 011 -> 5.5x */ 0},
+ {20, /* 100 -> 2.0x */ 0},
+ {30, /* 101 -> 3.0x */ 0},
+ {60, /* 110 -> 6.0x */ 0},
+ {35, /* 111 -> 3.5x */ 0},
+ {0, CPUFREQ_TABLE_END}
};
@@ -60,7 +61,7 @@
msrval = POWERNOW_IOPORT + 0x0;
wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
- return clock_ratio[(invalue >> 5)&7];
+ return clock_ratio[(invalue >> 5)&7].index;
}
@@ -82,7 +83,7 @@
}
freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
- freqs.new = busfreq * clock_ratio[best_i];
+ freqs.new = busfreq * clock_ratio[best_i].index;
freqs.cpu = 0; /* powernow-k6.c is UP only driver */
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
@@ -115,39 +116,7 @@
*/
static int powernow_k6_verify(struct cpufreq_policy *policy)
{
- unsigned int number_states = 0;
- unsigned int i, j;
-
- if (!policy || !busfreq)
- return -EINVAL;
-
- policy->cpu = 0;
- cpufreq_verify_within_limits(policy, (20 * busfreq),
- (max_multiplier * busfreq));
-
- for (i=0; i<8; i++)
- if ((policy->min <= (busfreq * clock_ratio[i])) &&
- (policy->max >= (busfreq * clock_ratio[i])))
- number_states++;
-
- if (number_states)
- return 0;
-
- /* no state is available within range -- find next larger state */
-
- j = 6;
-
- for (i=0; i<8; i++)
- if (((clock_ratio[i] * busfreq) >= policy->min) &&
- (clock_ratio[i] < clock_ratio[j]))
- j = i;
-
- policy->max = clock_ratio[j] * busfreq;
-
- cpufreq_verify_within_limits(policy, (20 * busfreq),
- (max_multiplier * busfreq));
-
- return 0;
+ return cpufreq_frequency_table_verify(policy, &clock_ratio[0]);
}
@@ -159,43 +128,12 @@
*/
static int powernow_k6_setpolicy (struct cpufreq_policy *policy)
{
- unsigned int i;
- unsigned int optimal;
+ unsigned int newstate = 0;
- if (!powernow_driver || !policy || policy->cpu)
+ if (cpufreq_frequency_table_setpolicy(policy, &clock_ratio[0], &newstate))
return -EINVAL;
- switch(policy->policy) {
- case CPUFREQ_POLICY_POWERSAVE:
- optimal = 6;
- break;
- case CPUFREQ_POLICY_PERFORMANCE:
- optimal = max_multiplier;
- break;
- default:
- return -EINVAL;
- }
-
- for (i=0;i<8;i++) {
- unsigned int freq = busfreq * clock_ratio[i];
- if (clock_ratio[i] > max_multiplier)
- continue;
- if ((freq > policy->max) ||
- (freq < policy->min))
- continue;
- switch(policy->policy) {
- case CPUFREQ_POLICY_POWERSAVE:
- if (freq < (clock_ratio[optimal] * busfreq))
- optimal = i;
- break;
- case CPUFREQ_POLICY_PERFORMANCE:
- if (freq > (clock_ratio[optimal] * busfreq))
- optimal = i;
- break;
- }
- }
-
- powernow_k6_set_state(optimal);
+ powernow_k6_set_state(newstate);
return 0;
}
@@ -213,6 +151,7 @@
struct cpuinfo_x86 *c = cpu_data;
struct cpufreq_driver *driver;
unsigned int result;
+ unsigned int i;
if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
((c->x86_model != 12) && (c->x86_model != 13)))
@@ -235,20 +174,29 @@
}
driver->policy = (struct cpufreq_policy *) (driver + 1);
-#ifdef CONFIG_CPU_FREQ_24_API
- driver->cpu_cur_freq[0] = busfreq * max_multiplier;
-#endif
+ /* table init */
+ for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if (clock_ratio[i].index > max_multiplier)
+ clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
+ else
+ clock_ratio[i].frequency = busfreq * clock_ratio[i].index;
+ }
driver->verify = &powernow_k6_verify;
driver->setpolicy = &powernow_k6_setpolicy;
+ /* cpuinfo and default policy values */
driver->policy[0].cpu = 0;
- driver->policy[0].min = busfreq * 20;
- driver->policy[0].max = busfreq * max_multiplier;
- driver->policy[0].policy = CPUFREQ_POLICY_PERFORMANCE;
- driver->policy[0].cpuinfo.max_freq = busfreq * max_multiplier;
- driver->policy[0].cpuinfo.min_freq = busfreq * 20;
driver->policy[0].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ driver->policy[0].policy = CPUFREQ_POLICY_PERFORMANCE;
+#ifdef CONFIG_CPU_FREQ_24_API
+ driver->cpu_cur_freq[0] = busfreq * max_multiplier;
+#endif
+ result = cpufreq_frequency_table_cpuinfo(&driver->policy[0], &clock_ratio[0]);
+ if (result) {
+ kfree(driver);
+ return result;
+ }
powernow_driver = driver;
@@ -274,7 +222,7 @@
if (powernow_driver) {
for (i=0;i<8;i++)
- if (clock_ratio[i] == max_multiplier)
+ if (clock_ratio[i].index == max_multiplier)
powernow_k6_set_state(i);
cpufreq_unregister();
kfree(powernow_driver);
diff -ruN linux-original/arch/i386/kernel/cpu/cpufreq/speedstep.c linux/arch/i386/kernel/cpu/cpufreq/speedstep.c
--- linux-original/arch/i386/kernel/cpu/cpufreq/speedstep.c 2003-01-10 22:15:01.000000000 +0100
+++ linux/arch/i386/kernel/cpu/cpufreq/speedstep.c 2003-01-10 22:16:10.000000000 +0100
@@ -58,12 +58,18 @@
* There are only two frequency states for each processor. Values
* are in kHz for the time being.
*/
-static unsigned int speedstep_low_freq;
-static unsigned int speedstep_high_freq;
-
#define SPEEDSTEP_HIGH 0x00000000
#define SPEEDSTEP_LOW 0x00000001
+static struct cpufreq_frequency_table speedstep_freqs[] = {
+ {SPEEDSTEP_HIGH, 0},
+ {SPEEDSTEP_LOW, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+#define speedstep_low_freq speedstep_freqs[SPEEDSTEP_LOW].frequency
+#define speedstep_high_freq speedstep_freqs[SPEEDSTEP_HIGH].frequency
+
/* DEBUG
* Define it if you want verbose debug output, e.g. for bug reporting
@@ -569,22 +575,13 @@
*/
static int speedstep_setpolicy (struct cpufreq_policy *policy)
{
- if (!speedstep_driver || !policy)
+ unsigned int newstate = 0;
+
+ if (cpufreq_frequency_table_setpolicy(policy, &speedstep_freqs[0], &newstate))
return -EINVAL;
- if (policy->min > speedstep_low_freq)
- speedstep_set_state(SPEEDSTEP_HIGH, 1);
- else {
- if (policy->max < speedstep_high_freq)
- speedstep_set_state(SPEEDSTEP_LOW, 1);
- else {
- /* both frequency states are allowed */
- if (policy->policy == CPUFREQ_POLICY_POWERSAVE)
- speedstep_set_state(SPEEDSTEP_LOW, 1);
- else
- speedstep_set_state(SPEEDSTEP_HIGH, 1);
- }
- }
+ speedstep_set_state(newstate, 1);
+
return 0;
}
@@ -598,19 +595,7 @@
*/
static int speedstep_verify (struct cpufreq_policy *policy)
{
- if (!policy || !speedstep_driver ||
- !speedstep_low_freq || !speedstep_high_freq)
- return -EINVAL;
-
- policy->cpu = 0; /* UP only */
-
- cpufreq_verify_within_limits(policy, speedstep_low_freq, speedstep_high_freq);
-
- if ((policy->min > speedstep_low_freq) &&
- (policy->max < speedstep_high_freq))
- policy->max = speedstep_high_freq;
-
- return 0;
+ return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
}
@@ -692,6 +677,13 @@
driver->policy = (struct cpufreq_policy *) (driver + 1);
+ driver->policy[0].cpu = 0;
+ result = cpufreq_frequency_table_cpuinfo(&driver->policy[0], &speedstep_freqs[0]);
+ if (result) {
+ kfree(driver);
+ return result;
+ }
+
#ifdef CONFIG_CPU_FREQ_24_API
driver->cpu_cur_freq[0] = speed;
#endif
@@ -699,11 +691,6 @@
driver->verify = &speedstep_verify;
driver->setpolicy = &speedstep_setpolicy;
- driver->policy[0].cpu = 0;
- driver->policy[0].min = speedstep_low_freq;
- driver->policy[0].max = speedstep_high_freq;
- driver->policy[0].cpuinfo.min_freq = speedstep_low_freq;
- driver->policy[0].cpuinfo.max_freq = speedstep_high_freq;
driver->policy[0].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
driver->policy[0].policy = (speed == speedstep_low_freq) ?
diff -ruN linux-original/include/linux/cpufreq.h linux/include/linux/cpufreq.h
--- linux-original/include/linux/cpufreq.h 2003-01-10 21:56:23.000000000 +0100
+++ linux/include/linux/cpufreq.h 2003-01-10 22:16:10.000000000 +0100
@@ -241,4 +241,27 @@
#endif /* CONFIG_CPU_FREQ_24_API */
+/*********************************************************************
+ * FREQUENCY TABLE HELPERS *
+ *********************************************************************/
+
+#define CPUFREQ_ENTRY_INVALID ~0
+#define CPUFREQ_TABLE_END ~1
+
+struct cpufreq_frequency_table {
+ unsigned int index; /* any */
+ unsigned int frequency; /* kHz - doesn't need to be in ascending
+ * order */
+};
+
+int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table *table);
+
+int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table *table);
+
+int cpufreq_frequency_table_setpolicy(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table *table,
+ unsigned int *index);
+
#endif /* _LINUX_CPUFREQ_H */
diff -ruN linux-original/kernel/cpufreq.c linux/kernel/cpufreq.c
--- linux-original/kernel/cpufreq.c 2003-01-10 22:13:42.000000000 +0100
+++ linux/kernel/cpufreq.c 2003-01-10 22:16:10.000000000 +0100
@@ -1134,3 +1134,120 @@
#define cpufreq_restore() do {} while (0)
#endif /* CONFIG_PM */
+
+/*********************************************************************
+ * FREQUENCY TABLE HELPERS *
+ *********************************************************************/
+
+int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table *table)
+{
+ unsigned int min_freq = ~0;
+ unsigned int max_freq = 0;
+ unsigned int i = 0;
+
+ for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ unsigned int freq = table[i].frequency;
+ if (freq == CPUFREQ_ENTRY_INVALID)
+ continue;
+ if (freq < min_freq)
+ min_freq = freq;
+ if (freq > max_freq)
+ max_freq = freq;
+ }
+
+ policy->min = policy->cpuinfo.min_freq = min_freq;
+ policy->max = policy->cpuinfo.max_freq = max_freq;
+
+ if (policy->min == ~0)
+ return -EINVAL;
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_frequency_table_cpuinfo);
+
+
+int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table *table)
+{
+ unsigned int next_larger = ~0;
+ unsigned int i = 0;
+ unsigned int count = 0;
+
+ if (!cpu_online(policy->cpu))
+ return -EINVAL;
+
+ cpufreq_verify_within_limits(policy,
+ policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+
+ for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ unsigned int freq = table[i].frequency;
+ if (freq == CPUFREQ_ENTRY_INVALID)
+ continue;
+ if ((freq >= policy->min) && (freq <= policy->max))
+ count++;
+ else if ((next_larger > freq) && (freq > policy->max))
+ next_larger = freq;
+ }
+
+ if (!count)
+ policy->max = next_larger;
+
+ cpufreq_verify_within_limits(policy,
+ policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_frequency_table_verify);
+
+
+int cpufreq_frequency_table_setpolicy(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table *table,
+ unsigned int *index)
+{
+ struct cpufreq_frequency_table optimal = { .index = ~0, };
+ unsigned int i;
+
+ switch (policy->policy) {
+ case CPUFREQ_POLICY_PERFORMANCE:
+ optimal.frequency = 0;
+ break;
+ case CPUFREQ_POLICY_POWERSAVE:
+ optimal.frequency = ~0;
+ break;
+ }
+
+ if (!cpu_online(policy->cpu))
+ return -EINVAL;
+
+ for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ unsigned int freq = table[i].frequency;
+ if (freq == CPUFREQ_ENTRY_INVALID)
+ continue;
+ if ((freq < policy->min) || (freq > policy->max))
+ continue;
+ switch(policy->policy) {
+ case CPUFREQ_POLICY_PERFORMANCE:
+ if (optimal.frequency <= freq) {
+ optimal.frequency = freq;
+ optimal.index = i;
+ }
+ break;
+ case CPUFREQ_POLICY_POWERSAVE:
+ if (optimal.frequency >= freq) {
+ optimal.frequency = freq;
+ optimal.index = i;
+ }
+ break;
+ }
+ }
+ if (optimal.index > i)
+ return -EINVAL;
+
+ *index = optimal.index;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_frequency_table_setpolicy);
reply other threads:[~2003-01-10 21:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030110214530.GA1148@brodo.de \
--to=linux@brodo.de \
--cc=cpufreq@www.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.