From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ryan Pavlik Subject: Re: MTP/AV / Sequencer MIDI problem... design issue? Date: Sat, 11 Jan 2003 17:02:41 -0800 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20030111170241.2975b352.rpav@nwlink.com> References: <20030110113711.06e8ee2d.rpav@nwlink.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Jaroslav Kysela Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Sat, 11 Jan 2003 15:46:15 +0100 (CET) Jaroslav Kysela wrote: > ALSA driver should handle this correctly (at least current CVS code). > The write sequence is locked. Hrm, I'll check through the code---after playing with it, it doesn't appear things are 100% yet. I had decent luck at first, with messages not trampling each other, but as I added new sequences (using seq24 to test), odd problems developed. The first was port 1 acting like broadcast, which I haven't seen before; this would be fixed temporarily by reloading the driver. Then voices started losing notes and messages, much as before. I will look at the (new?) write locking and see if I can figure something out. Thanks, -- Ryan Pavlik "Nautical, schmautical. Give me one hour and I'll know enough to sail us into orbit! ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com