Re: S4bios on Sony Vaio FX601

[Marco Gigante <marcogi-VGgt2q2+T+FeoWH0uzbU5w@public.gmane.org>]

On Fri, Jan 17, 2003 at 11:43:49AM +0100, Ducrot Bruno wrote:
> On Thu, Jan 16, 2003 at 06:50:42PM +0100, marcogi-VGgt2q2+T+FeoWH0uzbU5w@public.gmane.org wrote:
> > On Thu, 16 Jan 2003, Ducrot Bruno wrote:
> > 
> > > > While using linux 2.4.20 + acpi-20021205 and 2 patches posted to this
> > > > ML some time ago (s4bios-2.4.20-acpi-20021205 and
> > > > 00_system_fix_s4bios-2.4.20-acpi-20021205) suspend doesn't works.
> > > > echo -n 4b >/proc/acpi/sleep make bios to start hibernation process, but
> > > > on resuming system hangs after datas from suspend partition are loaded.
> > > > The bios resume screen remains on the screen and I must power cycle the
> > > > notebook.
> > >
> > > Did you use framebuffer console?  If yes, try without it.  Try also on
> > > console.
> > 
> > I'm using console. I did not compile framebuffer into my kernel.
> > How can I produce info for debug?
> > 
> 
> I got some trouble with an usb mouse, also the PCI config space of
> the pcmcia hubs was not properly restored.
> Could you try without usb nor any pcmcia cards please?

Done, but problem is still the same.
I tried to not load usb and pcmcia modules at all (not removing after
load), only acpi modules loaded and still the same. Pcmcia sockets were
empty.
Must I compile acpi built into kernel?

--
Regards, Marco Gigante


-------------------------------------------------------
This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will
allow you to extend the highest allowed 128 bit encryption to all your 
clients even if they use browsers that are limited to 40 bit encryption. 
Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en