From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from sj-msg-core-4.cisco.com (sj-msg-core-4.cisco.com [171.71.163.54]) by dsl2.external.hp.com (Postfix) with ESMTP id 3D26B482A for ; Sat, 1 Feb 2003 02:50:46 -0700 (MST) Date: Sat, 1 Feb 2003 01:50:12 -0800 From: Christian Suder To: Christian Suder Cc: adam.sk@groovy.ffloth.com, parisc-linux@lists.parisc-linux.org Subject: Correction Re: [parisc-linux] Tried to Install Debian 3r1 on C110, C180 and 2 712/60, no luck. Message-Id: <20030201015012.0daca042.csuder@cisco.com> In-Reply-To: <3E3B94EE.9010303@cisco.com> References: <002d01c2c9aa$37400140$b601a8c0@pepp> <3E3B94EE.9010303@cisco.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: Correction : the EG does show up as a fb device, and the correct spelling would have been "built" in this case... ;-) C. On Sat, 01 Feb 2003 01:35:42 -0800 Christian Suder wrote: > > Hi Adam, > > no kidding, I am/have been running it on a C110, C180 and 712.... ;-) > Although the 712 is a /80 not a /60, and that was before the official > woody release. But the C110 and C180 were both installed from the same > release CD. No problems with either one, but the C180 does have a > visualize in it, the build in EG is not supported. > > Regarding the keyboard disconnect/reconnect - that would only be needed > for HIL keyboards, AFAIK. I used whatever PS/2 keyboard and mouse I had > sitting around and that worked. > > Christian > > > > Adam Skaffloth wrote: > > Hi ! > > > > I wonder if someone could give me a help in the right direction. > > I have a C110, a C180 and 2 712/60. > > C110 would boot fine until you get to the first menu, then the > > keyboard would be out. > > I have tried the previous tricks about disconnect/reconnect the > > keyboard, but to no use. > > The Visualize-EG in C180 seems not be working, seen threads about > > that, so installed the Visualize-24 card from the C110 on the C180 and > > get the same result. > > Is this problem only related to the install or if I install using > > serial console would it be a head-less machine = no use ? > > > > I also read that their are no trouble with installing on 712/60. > > I got 2, one with the second LAN/Serial Card (So I can use it as a > > FW). Bot are starting but are hanging after the message: > > > > The Installation Program is determining the current state > > of your system and the next installation step that should > > be performed. > > > > It hangs there forever on both boxes. > > > > Anyone succeded with a install of Debian 3 on the above HW that could > > give me a hand, > > I am giving PA Risc a chance until I need to put the Sparc and the > > Intel back into the plans. > > > > / Adam > > > > > > _______________________________________________ > > parisc-linux mailing list > > parisc-linux@lists.parisc-linux.org > > http://lists.parisc-linux.org/mailman/listinfo/parisc-linux > >