From: Mike Anderson <andmike@us.ibm.com>
To: linux-scsi@vger.kernel.org
Subject: [PATCH] scsi/pcmcia compile fix
Date: Sun, 16 Feb 2003 18:25:53 -0800 [thread overview]
Message-ID: <20030217022553.GA5334@beaverton.ibm.com> (raw)
This is a compile fix for bug:
http://bugme.osdl.org/show_bug.cgi?id=360
This patch is against scsi-misc-2.5.
Testing: Compile only
-andmike
--
Michael Anderson
andmike@us.ibm.com
aha152x_stub.c | 2 +-
nsp_cs.c | 40 ++++++++++++++++++++--------------------
nsp_message.c | 2 +-
3 files changed, 22 insertions(+), 22 deletions(-)
------
===== drivers/scsi/pcmcia/aha152x_stub.c 1.11 vs edited =====
--- 1.11/drivers/scsi/pcmcia/aha152x_stub.c Mon Feb 3 23:47:00 2003
+++ edited/drivers/scsi/pcmcia/aha152x_stub.c Sun Feb 16 13:23:48 2003
@@ -408,7 +408,7 @@
if (link->state & DEV_CONFIG) {
Scsi_Cmnd tmp;
CardServices(RequestConfiguration, link->handle, &link->conf);
- tmp.host = info->host;
+ tmp.device->host = info->host;
aha152x_host_reset(&tmp);
}
break;
===== drivers/scsi/pcmcia/nsp_cs.c 1.15 vs edited =====
--- 1.15/drivers/scsi/pcmcia/nsp_cs.c Fri Jan 3 05:17:04 2003
+++ edited/drivers/scsi/pcmcia/nsp_cs.c Sun Feb 16 13:30:27 2003
@@ -325,9 +325,9 @@
static unsigned int nsphw_start_selection(Scsi_Cmnd *SCpnt,
nsp_hw_data *data)
{
- unsigned int host_id = SCpnt->host->this_id;
- unsigned int base = SCpnt->host->io_port;
- unsigned char target = SCpnt->target;
+ unsigned int host_id = SCpnt->device->host->this_id;
+ unsigned int base = SCpnt->device->host->io_port;
+ unsigned char target = SCpnt->device->id;
int time_out;
unsigned char phase, arbit;
@@ -405,7 +405,7 @@
*/
static int nsp_msg(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
{
- unsigned char target = SCpnt->target;
+ unsigned char target = SCpnt->device->id;
// unsigned char lun = SCpnt->lun;
sync_data *sync = &(data->Sync[target]);
struct nsp_sync_table *sync_table;
@@ -462,7 +462,7 @@
*/
static void nsp_start_timer(Scsi_Cmnd *SCpnt, nsp_hw_data *data, int time)
{
- unsigned int base = SCpnt->host->io_port;
+ unsigned int base = SCpnt->device->host->io_port;
//DEBUG(0, "%s: in SCpnt=0x%p, time=%d\n", __FUNCTION__, SCpnt, time);
data->TimerCount = time;
@@ -474,7 +474,7 @@
*/
static int nsp_negate_signal(Scsi_Cmnd *SCpnt, unsigned char mask, char *str)
{
- unsigned int base = SCpnt->host->io_port;
+ unsigned int base = SCpnt->device->host->io_port;
unsigned char reg;
int time_out;
@@ -503,7 +503,7 @@
unsigned char current_phase,
unsigned char mask)
{
- unsigned int base = SCpnt->host->io_port;
+ unsigned int base = SCpnt->device->host->io_port;
int time_out;
unsigned char phase, i_src;
@@ -536,7 +536,7 @@
*/
static int nsp_xfer(Scsi_Cmnd *SCpnt, nsp_hw_data *data, int phase)
{
- unsigned int base = SCpnt->host->io_port;
+ unsigned int base = SCpnt->device->host->io_port;
char *buf = data->MsgBuffer;
int len = MIN(MSGBUF_SIZE, data->MsgLen);
int ptr;
@@ -606,7 +606,7 @@
*/
static int nsp_reselected(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
{
- unsigned int base = SCpnt->host->io_port;
+ unsigned int base = SCpnt->device->host->io_port;
unsigned char reg;
//DEBUG(0, "%s:\n", __FUNCTION__);
@@ -626,7 +626,7 @@
*/
static int nsp_fifo_count(Scsi_Cmnd *SCpnt)
{
- unsigned int base = SCpnt->host->io_port;
+ unsigned int base = SCpnt->device->host->io_port;
unsigned int count;
unsigned int l, m, h, dummy;
@@ -653,8 +653,8 @@
*/
static void nsp_pio_read(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
{
- unsigned int base = SCpnt->host->io_port;
- unsigned long mmio_base = SCpnt->host->base;
+ unsigned int base = SCpnt->device->host->io_port;
+ unsigned long mmio_base = SCpnt->device->host->base;
long time_out;
int ocount, res;
unsigned char stat, fifo_stat;
@@ -746,8 +746,8 @@
*/
static void nsp_pio_write(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
{
- unsigned int base = SCpnt->host->io_port;
- unsigned long mmio_base = SCpnt->host->base;
+ unsigned int base = SCpnt->device->host->io_port;
+ unsigned long mmio_base = SCpnt->device->host->base;
int time_out;
int ocount, res;
unsigned char stat;
@@ -838,8 +838,8 @@
*/
static int nsp_nexus(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
{
- unsigned int base = SCpnt->host->io_port;
- unsigned char target = SCpnt->target;
+ unsigned int base = SCpnt->device->host->io_port;
+ unsigned char target = SCpnt->device->id;
// unsigned char lun = SCpnt->lun;
sync_data *sync = &(data->Sync[target]);
@@ -944,8 +944,8 @@
return;
} else {
tmpSC = data->CurrentSC;
- target = tmpSC->target;
- lun = tmpSC->lun;
+ target = tmpSC->device->id;
+ lun = tmpSC->device->lun;
sync_neg = &(data->Sync[target].SyncNegotiation);
}
@@ -1425,7 +1425,7 @@
static int nsp_eh_bus_reset(Scsi_Cmnd *SCpnt)
{
nsp_hw_data *data = &nsp_data;
- unsigned int base = SCpnt->host->io_port;
+ unsigned int base = SCpnt->device->host->io_port;
int i;
DEBUG(0, "%s: SCpnt=0x%p base=0x%x\n", __FUNCTION__, SCpnt, base);
@@ -1960,7 +1960,7 @@
}
info->stop = 0;
- tmp.host = info->host;
+ tmp.device->host = info->host;
nsp_eh_host_reset(&tmp);
nsp_eh_bus_reset(&tmp);
===== drivers/scsi/pcmcia/nsp_message.c 1.5 vs edited =====
--- 1.5/drivers/scsi/pcmcia/nsp_message.c Tue Nov 5 15:47:26 2002
+++ edited/drivers/scsi/pcmcia/nsp_message.c Sun Feb 16 13:31:58 2003
@@ -10,7 +10,7 @@
static void nsp_message_in(Scsi_Cmnd *SCpnt, nsp_hw_data *data)
{
- unsigned int base = SCpnt->host->io_port;
+ unsigned int base = SCpnt->device->host->io_port;
unsigned char data_reg, control_reg;
int ret, len;
next reply other threads:[~2003-02-17 2:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-17 2:25 Mike Anderson [this message]
2003-02-17 7:55 ` [PATCH] scsi/pcmcia compile fix GOTO Masanori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030217022553.GA5334@beaverton.ibm.com \
--to=andmike@us.ibm.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.