From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark J Roberts Subject: Audigy1 MIDI input, wavetable support? Date: Fri, 7 Mar 2003 09:44:02 -0600 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20030307154402.GA338@znex> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I am trying to load a soundfont into my Audigy1's wavetable and play it with a MIDI keyboard. I am using kernel 2.5.64. MIDI output verifiably works. However, MIDI input does not. The cable and keyboard are not the problem--I've tried them with an es1371, and I easily got MIDI input working. My procedure with the Audigy1: cat /dev/snd/midiC0D0 watch /proc/interrupts watch /proc/asound/Audigy/midi0 No interrupts occur and no bytes are read. I have also tried using aconnect to connect the inputs. Does anyone else see this behavior? I've got one more question. What program should I use to configure the wavetable and load the soundfonts? I found a couple versions of "awesfx", neither of which was compatible with my ALSA. ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com