From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Mon, 17 Mar 2003 09:38:04 -0700 To: Ryan Bradetich Cc: Jan-Benedict Glaw , parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] FC driver? Message-ID: <20030317163804.GC31378@dsl2.external.hp.com> References: <3E68A12A00002910@ocpmta3.freegates.net> <20030317111801.GF17073@lug-owl.de> <20030317161445.GA31378@dsl2.external.hp.com> <1047918143.14507.18.camel@beavis.ybsoft.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1047918143.14507.18.camel@beavis.ybsoft.com> From: grundler@dsl2.external.hp.com (Grant Grundler) Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: On Mon, Mar 17, 2003 at 09:22:23AM -0700, Ryan Bradetich wrote: > On parisc? I've had trouble with it running on my C200. Maybe > it is time to try it again. I know Jes and Martin worked on it > for i386.. my bad - you are right. It still doesn' work. Details follow. I just tried it again with: 20:00.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02) 21:04.0 Fibre Channel: Hewlett-Packard Company Tach TL Fibre Channel Host Adapter (rev 0a) 21:05.0 Fibre Channel: Hewlett-Packard Company Tach TL Fibre Channel Host Adapter (rev 0a) 20:00.0 Class 0604: 1011:0026 (rev 02) 21:04.0 Class 0c04: 103c:1028 (rev 0a) 21:05.0 Class 0c04: 103c:1028 (rev 0a) cpqfc driver loads but still finds no devices on the FC hub. gsyprf11:~# modprobe cpqfc scsi_register allocating 6640 bytes for FC HBA HBA found! HostAdapter->PciDev->irq = 256 PciDev->baseaddress[0]= 0 PciDev->baseaddress[1]= 20000 PciDev->baseaddress[2]= 20100 PciDev->baseaddress[3]= fffffffffa040000 cpqfcHBAdata->fcChip.Registers. : IOBaseL = 20000 IOBaseU = 20100 ioremap'd Membase: fffffffffa040000 SFQconsumerIndex.address = fffffffffa040058 ERQproducerIndex.address = fffffffffa040008 TYconfig.address = fffffffffa040184 FMconfig.address = fffffffffa0401c0 FMcontrol.address = fffffffffa0401c4 Requesting 255 I/O addresses @ 20000 Requesting 255 I/O addresses @ 20100 ResetTachyon HBA Tachyon RevId 2.2 Allocating 129024 for 576 Exchanges @ 00000000355e0000 Allocating 112904 for LinkQ @ 00000000355c0000 (576 elements) Allocating 106504 for TachSEST for 512 Exchanges cpqfcTS: writing IMQ BASE 7580000h PI 7584000h cpqfcTS: SEST 000000004be80000(virt): Wrote base 75A0000h @ fffffffffa040140 cpqfcTS: NVRAM read failed WARNING! HBA NVRAM WWN read failed - make alias WWN 51044F1044556677 Waiting for broken Brocade switch... scsi_register allocating 6640 bytes for FC HBA HBA found! HostAdapter->PciDev->irq = 257 PciDev->baseaddress[0]= 0 PciDev->baseaddress[1]= 20200 PciDev->baseaddress[2]= 20300 PciDev->baseaddress[3]= fffffffffa041000 cpqfcHBAdata->fcChip.Registers. : IOBaseL = 20200 IOBaseU = 20300 ioremap'd Membase: fffffffffa041000 SFQconsumerIndex.address = fffffffffa041058 ERQproducerIndex.address = fffffffffa041008 TYconfig.address = fffffffffa041184 FMconfig.address = fffffffffa0411c0 FMcontrol.address = fffffffffa0411c4 Requesting 255 I/O addresses @ 20200 Requesting 255 I/O addresses @ 20300 ResetTachyon HBA Tachyon RevId 2.2 Allocating 129024 for 576 Exchanges @ 000000004be60000 Allocating 112904 for LinkQ @ 000000004be40000 (576 elements) Allocating 106504 for TachSEST for 512 Exchanges cpqfcTS: writing IMQ BASE 7800000h PI 7804000h cpqfcTS: SEST 000000004be20000(virt): Wrote base 7820000h @ fffffffffa041140 cpqfcTS: NVRAM read failed WARNING! HBA NVRAM WWN read failed - make alias WWN 510450E844556677 Waiting for broken Brocade switch... scsi6 : Agilent FC HBA, Tachyon XL2 HPFC-5200B/2.2: WWN 51044F1044556677 on PCI bus 33 device 0x1028 irq 256 IObaseL 0x20000, MEMBASE 0xfa040000 PCI bus width 64 bits, bus speed 66 MHz FCP-SCSI Driver v2.1.1 GBIC detected: Unknown. LPSM 0h Monitor scsi7 : Agilent FC HBA, Tachyon XL2 HPFC-5200B/2.2: WWN 510450E844556677 on PCI bus 33 device 0x1028 irq 257 IObaseL 0x20200, MEMBASE 0xfa041000 PCI bus width 64 bits, bus speed 66 MHz FCP-SCSI Driver v2.1.1 GBIC detected: Short-wave. LPSM 0h Monitor gsyprf11:~# The "NVRAM read failed" msg seems to be a problem still. Fixing that would be a next step. The GBIC detection is the next problem that would need work. Looks like a timing problem since the first GBIC was not detected and the second one was. grant