All of lore.kernel.org
 help / color / mirror / Atom feed
From: William Lee Irwin III <wli@holomorphy.com>
To: "Justin T. Gibbs" <gibbs@scsiguy.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: 2.5.56-mm1 fails to detect cd burner
Date: Tue, 18 Mar 2003 13:13:57 -0800	[thread overview]
Message-ID: <20030318211357.GA1232@holomorphy.com> (raw)
In-Reply-To: <3196100000.1047914843@aslan.scsiguy.com>

On Mon, Mar 10, 2003 at 10:36:27PM -0800, William Lee Irwin III wrote:
>> jejb referred me to you (gibbs) for this after guiding me through a
>> cable check.

On Mon, Mar 17, 2003 at 08:27:23AM -0700, Justin T. Gibbs wrote:
> Can you try the latest driver 6.2.30, from here:
> http://people.FreeBSD.org/~gibbs/linux/SRC/
> Just untar the 2.5.X tarball into your source tree and recompile.
> If you still are having problems with the driver at that point, I'll
> guide you through other steps to enable debugging and get additional
> information.

Okay, I've got 2.5.65-mm1 up and it's detected. It needs some runtime
testing I'll have to do in 12-36 hours, probably with virgin 2.5.65
plus your driver.

Thanks.

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
        <Adaptec 3960D Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

anticipatory scheduling elevator
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
  Vendor: WDIGTL    Model: WDE18310 ULTRA2   Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
anticipatory scheduling elevator
(scsi0:A:3): 20.000MB/s transfers (20.000MHz, offset 15)
  Vendor: YAMAHA    Model: CRW8424S          Rev: 1.0j
  Type:   CD-ROM                             ANSI SCSI revision: 02
anticipatory scheduling elevator
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28
        <Adaptec 3960D Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

anticipatory scheduling elevator
(scsi1:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  Vendor: IBM       Model: DDYS-T36950N      Rev: S93E
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:6:0: Tagged Queuing enabled.  Depth 253
anticipatory scheduling elevator
st: Version 20021214, fixed bufsize 32768, wrt 30720, s/g segs 256
SCSI device sda: 35761710 512-byte hdwr sectors (18310 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sdb: drive cache: write through
 sdb: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 6, lun 0
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0

-- wli

  reply	other threads:[~2003-03-18 21:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-03-11  6:36 2.5.56-mm1 fails to detect cd burner William Lee Irwin III
2003-03-11 16:03 ` William Lee Irwin III
2003-03-17 15:27   ` Justin T. Gibbs
2003-03-18 21:13     ` William Lee Irwin III [this message]
2003-03-29 13:49       ` William Lee Irwin III
2003-03-30 21:24         ` William Lee Irwin III
2003-03-30 22:26           ` Justin T. Gibbs
2003-03-31  5:29             ` William Lee Irwin III
2003-03-31  5:50               ` Douglas Gilbert
2003-03-31  6:03                 ` William Lee Irwin III

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030318211357.GA1232@holomorphy.com \
    --to=wli@holomorphy.com \
    --cc=gibbs@scsiguy.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.