From: Gregoire Favre <greg@ulima.unil.ch>
To: linux-kernel@vger.kernel.org, cdwrite@other.debian.org
Subject: Any hope to have a working 2.5 kernels for writing DVD?
Date: Fri, 21 Mar 2003 19:13:08 +0100 [thread overview]
Message-ID: <20030321181308.GA23131@ulima.unil.ch> (raw)
Hello,
I have already reported this "bug" for an older kernel:
Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features: speed
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-500A '
Revision : '1.0f'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 8126464 = 7936 KB
FIFO size : 67108864 = 65536 KB
Track 01: data 4129 MB
Total size: 4129 MB = 2114048 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 184448
Starting to write CD/DVD at speed 1 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 9 seconds. 0.24% done, estimate finish Fri Mar 21 19:09:11 2003
8 seconds. 0.47% done, estimate finish Fri Mar 21 19:12:42 2003
7 seconds. 0.71% done, estimate finish Fri Mar 21 19:13:52 2003
0.95% done, estimate finish Fri Mar 21 19:14:27 2003
6 seconds. 1.18% done, estimate finish Fri Mar 21 19:13:24 2003
5 seconds. 1.42% done, estimate finish Fri Mar 21 19:13:52 2003
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01: 4 of 4129 MB written (fifo 97%) 16.3x.cdrecord-prodvd: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 08 B8 00 00 1F 00
status: 0x1 (GOOD STATUS)
resid: 63488
cmd finished after 0.010s timeout 100s
write track data: error after 4571136 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
Writing time: 5.371s
Average write speed 585.1x.
Fixating...
Fixating time: 77.468s
cdrecord-prodvd: fifo had 1095 puts and 73 gets.
cdrecord-prodvd: fifo was 0 times empty and 1 times full, min fill was 96%.
The command that give me that was:
mkisofs -dvd-video -V $1 $2 | cdrecord-prodvd driveropts=burnfree -dummy -v dev=/dev/hdc fs=64m speed=1 tsize={$SIZE}s -
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
next reply other threads:[~2003-03-21 18:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-21 18:13 Gregoire Favre [this message]
2003-03-21 20:10 ` Any hope to have a working 2.5 kernels for writing DVD? Jens Axboe
2003-03-21 20:21 ` Gregoire Favre
-- strict thread matches above, loose matches on Subject: below --
2003-03-24 13:34 Joerg Schilling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030321181308.GA23131@ulima.unil.ch \
--to=greg@ulima.unil.ch \
--cc=cdwrite@other.debian.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.