From: "Felipe Alfaro Solana" <felipe_alfaro@linuxmail.org>
To: baldrick@wanadoo.fr, alan@redhat.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.5 BK boot hang after ide
Date: Sun, 23 Mar 2003 15:31:08 +0100 [thread overview]
Message-ID: <20030323143108.30109.qmail@linuxmail.org> (raw)
----- Original Message -----
From: Duncan Sands <baldrick@wanadoo.fr>
Date: Sun, 23 Mar 2003 14:44:21 +0100
To: alan@redhat.com
Subject: 2.5 BK boot hang after ide
> Copied down by hand:
>
> ...
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller at PCI slot 00:11.1
> ACPI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
> VP_IDE: Chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: VIA vt 8235 (rev 00) IDE UDMA 133 controller on pci00:11.1
> ide0: BM_DMA at 0xfc00-0xfc07, BIOS settings: hda: DMA, hdb: DMA
> ide1: BM_DMA at 0xfc08-0xfc0f, BIOS settings: hdc: DMA, hdd: DMA
> hda: ST320423A, ATA DISK drive
> hdb: Maxtor 6E030L0, ATA DISK drive
> id0 at 0x1f0-0x1f7, 0x3f6 on irq 14
> hdc: TOSHIBA DVD-ROM SD-MI402, ATAPI CD/DVD-ROM drive
> hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177, 0x376 on irq 15
> hda: host protected area => 1
> hda : 40011300 sectors (20486 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
> hda: hda1 hda2 hda3
> hdb: host protected area => 1
> hdb : 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(133)
> hdb: hdb1
> (hangs)
I'm experiencing exactly the same as you: 2.5 won't
continue past IDE. I've tried 2.5.65-ac3, 2.5.65-bk3
and 2.5.65-mm4. All of them fail at the same point.
I've tried using ACPI, APM, disabling preempt, TCQ,
enabling SysRq support, but had no luck.
The machine is a Pentium 4 2.0Gz, with a QDI
PlatiniX 2D/533-A (i845E), 2 UDMA100 disks
(Seagate ST380021A 80GB and IBM-DTLA-307030
20GB), a Pioneer DVD-ROM and Sony CRX185E3).
--
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze
next reply other threads:[~2003-03-23 14:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-23 14:31 Felipe Alfaro Solana [this message]
2003-03-23 14:34 ` 2.5 BK boot hang after ide Duncan Sands
2003-03-23 15:48 ` Nicholas Wourms
2003-03-24 9:38 ` Duncan Sands
2003-03-24 13:16 ` Felipe Alfaro Solana
-- strict thread matches above, loose matches on Subject: below --
2003-03-23 14:49 Felipe Alfaro Solana
2003-03-23 13:44 Duncan Sands
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030323143108.30109.qmail@linuxmail.org \
--to=felipe_alfaro@linuxmail.org \
--cc=alan@redhat.com \
--cc=baldrick@wanadoo.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.