2.5.68 issues (X windows startup)

[jamal <hadi@cyberus.ca>]

[-- Attachment #1: Type: TEXT/PLAIN, Size: 741 bytes --]



I havent booted 2.5.x for a while on this dusty old laptop.
Never had this issue in the past. Have a feeling its some basic
utility that maybe needed.

--
model name      : Pentium III (Coppermine)
stepping        : 10
cpu MHz         : 696.996
cache size      : 256 KB
---

128M RAM.

When i run 2.5.68 theres a feel of highly improved interactiveness.
Annoyingly- Starting X takes at least 3 minutes (this is about a factor of
10 worse than older 2.5 and current 2.4.21-pre5. I have tried a few
2.5.6x and they all seem to exhibit this problem. Havent tried going back
beyond that.

I cleared the profile before running X; started X and captured the
profile right after that. Dont know if its any help, but it is attached.

cheers,
jamal

[-- Attachment #2: Type: TEXT/PLAIN, Size: 2262 bytes --]

 19456 total                                      0.1304
 17721 default_idle                             316.4464
  1411 run_timer_softirq                          2.9643
    62 do_softirq                                 0.2981
    55 set_bitmap                                 0.2926
    51 system_call                                1.1591
    25 general_protection                         2.0833
    18 __wake_up                                  0.1364
    14 schedule                                   0.0106
    11 save_v86_state                             0.0281
    10 sys_iopl                                   0.1042
     9 do_sys_vm86                                0.0296
     9 do_page_fault                              0.0087
     8 add_wait_queue                             0.0606
     6 sys_ioperm                                 0.0205
     5 remove_wait_queue                          0.0431
     5 handle_vm86_fault                          0.0020
     4 sys_vm86old                                0.0152
     4 rest_init                                  0.0345
     3 error_code                                 0.0536
     2 set_mtrr                                   0.0054
     2 schedule_timeout                           0.0116
     2 enable_irq                                 0.0086
     2 do_general_protection                      0.0185
     2 del_timer                                  0.0096
     2 add_timer                                  0.0114
     1 sys_gettimeofday                           0.0063
     1 sigprocmask                                0.0032
     1 resume_userspace                           0.0417
     1 release_task                               0.0026
     1 release_console_sem                        0.0034
     1 old_mmap                                   0.0033
     1 mm_init                                    0.0036
     1 mem_parity_error                           0.0227
     1 exit_notify                                0.0006
     1 do_gettimeofday                            0.0064
     1 del_timer_sync                             0.0081
     1 copy_process                               0.0003
     1 copy_files                                 0.0010