From: Greg KH <greg@kroah.com>
To: marcelo@conectiva.com.br
Cc: linux-kernel@vger.kernel.org, pcihpd-discuss@lists.sourceforge.net
Subject: Re: [PATCH] PCI Hotplug fixes for 2.4.21-rc1
Date: Fri, 2 May 2003 11:58:13 -0700 [thread overview]
Message-ID: <20030502185813.GD14728@kroah.com> (raw)
In-Reply-To: <20030502185733.GC14728@kroah.com>
ChangeSet 1.1144, 2003/05/02 11:35:50-07:00, greg@kroah.com
[PATCH] IBM PCI Hotplug: fix up a number of memory leaks on the error path
drivers/hotplug/ibmphp_ebda.c | 144 ++++++++++++++++++------------------------
1 files changed, 65 insertions(+), 79 deletions(-)
diff -Nru a/drivers/hotplug/ibmphp_ebda.c b/drivers/hotplug/ibmphp_ebda.c
--- a/drivers/hotplug/ibmphp_ebda.c Fri May 2 11:39:00 2003
+++ b/drivers/hotplug/ibmphp_ebda.c Fri May 2 11:39:00 2003
@@ -70,17 +70,6 @@
static int ebda_rsrc_rsrc (void);
static int ebda_rio_table (void);
-static struct slot *alloc_ibm_slot (void)
-{
- struct slot *slot;
-
- slot = kmalloc (sizeof (struct slot), GFP_KERNEL);
- if (!slot)
- return NULL;
- memset (slot, 0, sizeof (*slot));
- return slot;
-}
-
static struct ebda_hpc_list * __init alloc_ebda_hpc_list (void)
{
struct ebda_hpc_list *list;
@@ -757,8 +746,7 @@
struct ebda_hpc_slot *slot_ptr;
struct bus_info *bus_info_ptr1, *bus_info_ptr2;
int rc;
- int retval;
- struct slot *slot_cur;
+ struct slot *tmp_slot;
struct list_head *list;
addr = hpc_list_ptr->phys_addr;
@@ -783,8 +771,8 @@
/* init hpc structure */
hpc_ptr = alloc_ebda_hpc (slot_num, bus_num);
if (!hpc_ptr ) {
- iounmap (io_mem);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto error_no_hpc;
}
hpc_ptr->ctlr_id = ctlr_id;
hpc_ptr->ctlr_relative_id = ctlr;
@@ -810,8 +798,8 @@
if (!bus_info_ptr2) {
bus_info_ptr1 = (struct bus_info *) kmalloc (sizeof (struct bus_info), GFP_KERNEL);
if (!bus_info_ptr1) {
- iounmap (io_mem);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto error_no_hp_slot;
}
memset (bus_info_ptr1, 0, sizeof (struct bus_info));
bus_info_ptr1->slot_min = slot_ptr->slot_num;
@@ -871,16 +859,20 @@
hpc_ptr->u.pci_ctlr.dev_fun = readb (io_mem + addr + 1);
hpc_ptr->irq = readb (io_mem + addr + 2);
addr += 3;
- debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n", hpc_ptr->u.pci_ctlr.bus, hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq);
+ debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n",
+ hpc_ptr->u.pci_ctlr.bus,
+ hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq);
break;
case 0:
hpc_ptr->u.isa_ctlr.io_start = readw (io_mem + addr);
hpc_ptr->u.isa_ctlr.io_end = readw (io_mem + addr + 2);
- retval = check_region (hpc_ptr->u.isa_ctlr.io_start, (hpc_ptr->u.isa_ctlr.io_end - hpc_ptr->u.isa_ctlr.io_start + 1));
- if (retval)
- return -ENODEV;
- request_region (hpc_ptr->u.isa_ctlr.io_start, (hpc_ptr->u.isa_ctlr.io_end - hpc_ptr->u.isa_ctlr.io_start + 1), "ibmphp");
+ if (!request_region (hpc_ptr->u.isa_ctlr.io_start,
+ (hpc_ptr->u.isa_ctlr.io_end - hpc_ptr->u.isa_ctlr.io_start + 1),
+ "ibmphp")) {
+ rc = -ENODEV;
+ goto error_no_hp_slot;
+ }
hpc_ptr->irq = readb (io_mem + addr + 4);
addr += 5;
break;
@@ -893,8 +885,8 @@
addr += 6;
break;
default:
- iounmap (io_mem);
- return -ENODEV;
+ rc = -ENODEV;
+ goto error_no_hp_slot;
}
//reorganize chassis' linked list
@@ -910,91 +902,71 @@
hp_slot_ptr = (struct hotplug_slot *) kmalloc (sizeof (struct hotplug_slot), GFP_KERNEL);
if (!hp_slot_ptr) {
- iounmap (io_mem);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto error_no_hp_slot;
}
memset (hp_slot_ptr, 0, sizeof (struct hotplug_slot));
hp_slot_ptr->info = (struct hotplug_slot_info *) kmalloc (sizeof (struct hotplug_slot_info), GFP_KERNEL);
if (!hp_slot_ptr->info) {
- iounmap (io_mem);
- kfree (hp_slot_ptr);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto error_no_hp_info;
}
memset (hp_slot_ptr->info, 0, sizeof (struct hotplug_slot_info));
hp_slot_ptr->name = (char *) kmalloc (30, GFP_KERNEL);
if (!hp_slot_ptr->name) {
- iounmap (io_mem);
- kfree (hp_slot_ptr->info);
- kfree (hp_slot_ptr);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto error_no_hp_name;
}
- hp_slot_ptr->private = alloc_ibm_slot ();
- if (!hp_slot_ptr->private) {
- iounmap (io_mem);
- kfree (hp_slot_ptr->name);
- kfree (hp_slot_ptr->info);
- kfree (hp_slot_ptr);
- return -ENOMEM;
+ tmp_slot = kmalloc (sizeof (struct slot), GFP_KERNEL);
+ if (!tmp_slot) {
+ rc = -ENOMEM;
+ goto error_no_slot;
}
+ memset (tmp_slot, 0, sizeof (*tmp_slot));
- ((struct slot *)hp_slot_ptr->private)->flag = TRUE;
+ tmp_slot->flag = TRUE;
- ((struct slot *) hp_slot_ptr->private)->capabilities = hpc_ptr->slots[index].slot_cap;
+ tmp_slot->capabilities = hpc_ptr->slots[index].slot_cap;
if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_133_MAX) == EBDA_SLOT_133_MAX)
- ((struct slot *) hp_slot_ptr->private)->supported_speed = 3;
+ tmp_slot->supported_speed = 3;
else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_100_MAX) == EBDA_SLOT_100_MAX)
- ((struct slot *) hp_slot_ptr->private)->supported_speed = 2;
+ tmp_slot->supported_speed = 2;
else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX)
- ((struct slot *) hp_slot_ptr->private)->supported_speed = 1;
+ tmp_slot->supported_speed = 1;
if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP)
- ((struct slot *) hp_slot_ptr->private)->supported_bus_mode = 1;
+ tmp_slot->supported_bus_mode = 1;
else
- ((struct slot *) hp_slot_ptr->private)->supported_bus_mode = 0;
+ tmp_slot->supported_bus_mode = 0;
- ((struct slot *) hp_slot_ptr->private)->bus = hpc_ptr->slots[index].slot_bus_num;
+ tmp_slot->bus = hpc_ptr->slots[index].slot_bus_num;
bus_info_ptr1 = ibmphp_find_same_bus_num (hpc_ptr->slots[index].slot_bus_num);
if (!bus_info_ptr1) {
- iounmap (io_mem);
- kfree (hp_slot_ptr->name);
- kfree (hp_slot_ptr->info);
- kfree (hp_slot_ptr->private);
- kfree (hp_slot_ptr);
- return -ENODEV;
+ rc = -ENODEV;
+ goto error;
}
- ((struct slot *) hp_slot_ptr->private)->bus_on = bus_info_ptr1;
+ tmp_slot->bus_on = bus_info_ptr1;
bus_info_ptr1 = NULL;
- ((struct slot *) hp_slot_ptr->private)->ctrl = hpc_ptr;
+ tmp_slot->ctrl = hpc_ptr;
+ tmp_slot->ctlr_index = hpc_ptr->slots[index].ctl_index;
+ tmp_slot->number = hpc_ptr->slots[index].slot_num;
+ tmp_slot->hotplug_slot = hp_slot_ptr;
+
+ hp_slot_ptr->private = tmp_slot;
- ((struct slot *) hp_slot_ptr->private)->ctlr_index = hpc_ptr->slots[index].ctl_index;
- ((struct slot *) hp_slot_ptr->private)->number = hpc_ptr->slots[index].slot_num;
-
- ((struct slot *) hp_slot_ptr->private)->hotplug_slot = hp_slot_ptr;
rc = ibmphp_hpc_fillhpslotinfo (hp_slot_ptr);
- if (rc) {
- iounmap (io_mem);
- kfree (hp_slot_ptr->name);
- kfree (hp_slot_ptr->info);
- kfree (hp_slot_ptr->private);
- kfree (hp_slot_ptr);
- return rc;
- }
+ if (rc)
+ goto error;
rc = ibmphp_init_devno ((struct slot **) &hp_slot_ptr->private);
- if (rc) {
- iounmap (io_mem);
- kfree (hp_slot_ptr->name);
- kfree (hp_slot_ptr->info);
- kfree (hp_slot_ptr->private);
- kfree (hp_slot_ptr);
- return rc;
- }
+ if (rc)
+ goto error;
hp_slot_ptr->ops = &ibmphp_hotplug_slot_ops;
// end of registering ibm slot with hotplug core
@@ -1008,15 +980,29 @@
} /* each hpc */
list_for_each (list, &ibmphp_slot_head) {
- slot_cur = list_entry (list, struct slot, ibm_slot_list);
+ tmp_slot = list_entry (list, struct slot, ibm_slot_list);
- snprintf (slot_cur->hotplug_slot->name, 30, "%s", create_file_name (slot_cur));
- pci_hp_register (slot_cur->hotplug_slot);
+ snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot));
+ pci_hp_register (tmp_slot->hotplug_slot);
}
print_ebda_hpc ();
print_ibm_slot ();
return 0;
+
+error:
+ kfree (hp_slot_ptr->private);
+error_no_slot:
+ kfree (hp_slot_ptr->name);
+error_no_hp_name:
+ kfree (hp_slot_ptr->info);
+error_no_hp_info:
+ kfree (hp_slot_ptr);
+error_no_hp_slot:
+ free_ebda_hpc (hpc_ptr);
+error_no_hpc:
+ iounmap (io_mem);
+ return rc;
}
/*
prev parent reply other threads:[~2003-05-02 18:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-02 18:54 [BK PATCH] PCI Hotplug fixes for 2.4.21-rc1 Greg KH
2003-05-02 18:57 ` [PATCH] " Greg KH
2003-05-02 18:57 ` Greg KH
2003-05-02 18:58 ` Greg KH [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030502185813.GD14728@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo@conectiva.com.br \
--cc=pcihpd-discuss@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.