From: Alex Riesen <alexander.riesen@synopsys.COM>
To: linux-kernel@vger.kernel.org
Cc: Zwane Mwaikambo <zwane@linuxpower.ca>, Jeff Garzik <jgarzik@pobox.com>
Subject: 2.5.69+bk: "irq 15: nobody cared!" on a Compaq Armada 1592DT
Date: Tue, 13 May 2003 15:49:07 +0200 [thread overview]
Message-ID: <20030513134907.GF32559@Synopsys.COM> (raw)
Hi!
(Zwane, I saw you fixing a similar bug in xircom, so included
you in cc also. Maybe you have an idea what could I try first?)
This occured just after starting pcmcia, when booted with a
card already in slot and cable connected to it.
The traces didn't stop until i removed the card
(i tried to disconnect the cable first, which didn't help).
-alex
$ lsmod
Module Size Used by
pcnet_cs 16100 1
8390 8384 1 pcnet_cs
crc32 3744 1 8390
ds 11616 3 pcnet_cs
yenta_socket 14240 2
pcmcia_core 53888 3 pcnet_cs,ds,yenta_socket
soundcore 6560 0
$ lspci | grep CardBus
00:11.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
00:11.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
$ grep PCMCIA .config
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
# PCMCIA/CardBus support
CONFIG_PCMCIA=m
CONFIG_PCMCIA_PROBE=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# PCMCIA SCSI adapter support
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# PCMCIA network device support
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_PCMCIA_AXNET is not set
# PCMCIA character devices
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 15 for device 00:11.0
irq 15: nobody cared!
Call Trace:
[<c010a8fb>] handle_IRQ_event+0x7b/0xf0
[<c010ab39>] do_IRQ+0xa9/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c01a4355>] pci_bus_write_config_word+0x55/0x70
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1eeb1>] yenta_probe_irq+0xb1/0x120 [yenta_socket]
[<c6a1ed60>] yenta_interrupt+0x0/0x60 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1ef49>] yenta_get_socket_capabilities+0x29/0x50 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1fa6e>] yenta_open+0x12e/0x180 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20ff4>] +0x94/0x840 [yenta_socket]
[<c6a1e316>] add_pci_socket+0xa6/0xe0 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c6a1e391>] cardbus_probe+0x31/0x40 [yenta_socket]
[<c6a20e40>] yenta_operations+0x0/0x40 [yenta_socket]
[<c01a7555>] pci_device_probe+0x45/0x60
[<c6a20b80>] cardbus_table+0x0/0x40 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf675>] bus_match+0x35/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf768>] driver_attach+0x58/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20c10>] pci_cardbus_driver+0x50/0xa0 [yenta_socket]
[<c01cf9f6>] bus_add_driver+0x96/0xb0
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20e80>] +0x0/0xe0 [yenta_socket]
[<c01cfe1f>] driver_register+0x2f/0x40
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01a765e>] pci_register_driver+0x3e/0x50
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a1200d>] +0xd/0x11 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c012f015>] sys_init_module+0x135/0x280
[<c0109187>] syscall_call+0x7/0xb
handlers:
[<c6a1ed60>] (yenta_interrupt+0x0/0x60 [yenta_socket])
irq 15: nobody cared!
Call Trace:
[<c010a8fb>] handle_IRQ_event+0x7b/0xf0
[<c010ab39>] do_IRQ+0xa9/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c011e827>] do_softirq+0x47/0xb0
[<c010abb5>] do_IRQ+0x125/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c01a4355>] pci_bus_write_config_word+0x55/0x70
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1eeb1>] yenta_probe_irq+0xb1/0x120 [yenta_socket]
[<c6a1ed60>] yenta_interrupt+0x0/0x60 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1ef49>] yenta_get_socket_capabilities+0x29/0x50 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1fa6e>] yenta_open+0x12e/0x180 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20ff4>] +0x94/0x840 [yenta_socket]
[<c6a1e316>] add_pci_socket+0xa6/0xe0 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c6a1e391>] cardbus_probe+0x31/0x40 [yenta_socket]
[<c6a20e40>] yenta_operations+0x0/0x40 [yenta_socket]
[<c01a7555>] pci_device_probe+0x45/0x60
[<c6a20b80>] cardbus_table+0x0/0x40 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf675>] bus_match+0x35/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf768>] driver_attach+0x58/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20c10>] pci_cardbus_driver+0x50/0xa0 [yenta_socket]
[<c01cf9f6>] bus_add_driver+0x96/0xb0
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20e80>] +0x0/0xe0 [yenta_socket]
[<c01cfe1f>] driver_register+0x2f/0x40
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01a765e>] pci_register_driver+0x3e/0x50
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a1200d>] +0xd/0x11 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c012f015>] sys_init_module+0x135/0x280
[<c0109187>] syscall_call+0x7/0xb
next reply other threads:[~2003-05-13 13:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-13 13:49 Alex Riesen [this message]
2003-05-13 18:23 ` 2.5.69+bk: "irq 15: nobody cared!" on a Compaq Armada 1592DT Zwane Mwaikambo
2003-05-14 0:00 ` Andrew Morton
2003-05-14 9:34 ` Russell King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030513134907.GF32559@Synopsys.COM \
--to=alexander.riesen@synopsys.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=zwane@linuxpower.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.