[U-Boot-Users] sc520_cdp doesn't build

[Marc Singer <elf@buici.com>]

I have a snapshot that does build.  I had to made a small modification
to get it to work.  If you'd like it, I can make it available.

There also may be a problem with building sc520 with the gcc-3.x
compiler.  I'm not certain that this tool is the problem, but someone
else complained of the same overlap problem who was using gcc-3.x.  I
know that gcc-2.95.4 will build properly.


On Sun, Jun 08, 2003 at 07:49:05AM -0400, Brad Parker wrote:
> 
> Hi,
> 
> I can't get sc520_cdp to build cleanly on either the cvs tree or the the
> released 3.0.0 tree.
> 
> I can fix the problems, but they look like they are due to missing code
> and I'm wondering if I'm doing something wrong.
> 
> In one case there are 2-3 spi_eeprom_xxx routines missing (and some missing
> eeprom_xxx declarations).
> 
> In the other case the there is a missing pci class finding function.
> 
> I'm going to try building for a custom sc520 board but I thought I'd build
> one of the existing ports...
> 
> Also, if I stub the routine the link fails with:
> 
> ld: section .data [387d8aa0 -> 387da3df] overlaps section .rodata.str1.1 [387d8aa0 -> 387da2f0]
> ld: section .realmode [387da3e0 -> 387da545] overlaps section .rodata.str1.32 [387da300 -> 387df6a2]
> ld: section .bios [387da546 -> 387daa83] overlaps section .rodata.str1.32 [387da300 -> 387df6a2]
> 
> -brad
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
> thread debugger on the planet. Designed with thread debugging features
> you've never dreamed of, try TotalView 6 free at www.etnus.com.
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users