From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Langer Subject: Re: problems with rme digi96/8 Date: Mon, 9 Jun 2003 19:23:02 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <20030609172302.GA498@tuba.home> References: <1054808252.7022.8.camel@duff> <20030605190335.GB493@tuba.home> <1054893994.2069.47.camel@duff> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1054893994.2069.47.camel@duff> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Gorm David Lai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Fri, Jun 06, 2003 at 12:06:33PM +0200, Gorm David Lai wrote: > On Thu, 2003-06-05 at 21:03, Martin Langer wrote: > > On Thu, Jun 05, 2003 at 12:17:32PM +0200, Gorm David Lai wrote: > > > > > > We have recently bought a RME Digi96/8 card. This connects via adat to a > > > mixing console. > > > > ADAT isn't well tested, so everything is possible. But a look to wiki page > > on http://opensrc.org/alsa/index.php?page=rme96 looks not so bad. > > > > Are you using plughw:0,1 or hw:0,1? What's your alsa version? > > > Well, I test and set only legal settings on the hardware. So every > setting I set returns success. > > I normally use hw:0,1, but just tried with plughw:0,1. Sadly with no > luck. > My legal settings do not follow those on the page. The period size seems > to match, but my only legal buffer size is 4096. This seems to be > contrary to the info on the page. I also use a sample size of 16. I read on this page: For using ADAT, in case of 16 bit: - 512 frames and 8 periods ( 512*8=4096 ) - 128 frames and 32 periods ( 128*32=4096 ) Why does it not match your 16bit case? Have you choosen spdif values instead? But the best would be a view into the hardware description, which was under ftp://ftp.alsa-project.org/documentation/rme/ IIRC. martin ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.