From: Felix von Leitner <felix-kernel@fefe.de>
To: linuxppc-dev@lists.linuxppc.org
Subject: redwood-5 compile fixes for linuxppc-2.5
Date: Fri, 13 Jun 2003 14:10:06 +0200 [thread overview]
Message-ID: <20030613121005.GA1839@codeblau.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 185 bytes --]
Here is a small diff that makes the kernel compile for me. Can't say
whether it works, but at least it compiles ;-)
If anyone is working with such a board, please contact me!
Felix
[-- Attachment #2: ppc-diff --]
[-- Type: text/plain, Size: 3011 bytes --]
--- linuxppc-2.5/drivers/net/Kconfig 2003-06-12 15:22:51.000000000 +0200
+++ linuxppc-2.5-fefe/drivers/net/Kconfig 2003-06-13 10:34:59.000000000 +0200
@@ -868,6 +868,25 @@
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
+config SMC91111
+ tristate "SMC 91111 support"
+
+config SMC91111_ADVANCED
+ bool " Advanced configuration options for SMC91111"
+ depends on SMC91111
+
+config SMC91111_BYTE_SWAP
+ bool " Byte swap device accesses"
+ depends on SMC91111
+
+config SMC91111_USE_8_BIT
+ bool " Allow 8 bit device accesses"
+ depends on SMC91111
+
+config SMC91111_USE_32_BIT
+ bool " Allow 32 bit device accesses"
+ depends on SMC91111
+
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on NET_ETHERNET && ISA
--- linuxppc-2.5/drivers/net/Makefile 2003-06-12 15:21:54.000000000 +0200
+++ linuxppc-2.5-fefe/drivers/net/Makefile 2003-06-13 10:35:18.000000000 +0200
@@ -76,6 +76,7 @@
obj-$(CONFIG_SK_G16) += sk_g16.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_SMC9194) += smc9194.o
+obj-$(CONFIG_SMC91111) += smc91111.o
obj-$(CONFIG_FEC) += fec.o
obj-$(CONFIG_68360_ENET) += 68360enet.o
obj-$(CONFIG_ARM_ETHERH) += 8390.o
--- linuxppc-2.5/include/linux/pci.h 2003-06-12 15:22:13.000000000 +0200
+++ linuxppc-2.5-fefe/include/linux/pci.h 2003-06-13 10:56:42.000000000 +0200
@@ -806,9 +806,11 @@
* configuration space.
*/
+#ifdef CONFIG_PCI
#ifndef CONFIG_PCI_DOMAINS
static inline int pci_domain_nr(struct pci_bus *bus) { return 0; }
#endif
+#endif
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
--- linuxppc-2.5/arch/ppc/kernel/ppc_ksyms.c 2003-06-12 15:22:53.000000000 +0200
+++ linuxppc-2.5-fefe/arch/ppc/kernel/ppc_ksyms.c 2003-06-13 11:10:07.000000000 +0200
@@ -273,8 +273,10 @@
#ifdef CONFIG_NVRAM
EXPORT_SYMBOL(nvram_read_byte);
EXPORT_SYMBOL(nvram_write_byte);
+#ifdef CONFIG_PMAC
EXPORT_SYMBOL(pmac_xpram_read);
EXPORT_SYMBOL(pmac_xpram_write);
+#endif
#endif /* CONFIG_NVRAM */
EXPORT_SYMBOL(to_tm);
--- linuxppc-2.5/arch/ppc/kernel/misc.S 2003-06-12 15:22:54.000000000 +0200
+++ linuxppc-2.5-fefe/arch/ppc/kernel/misc.S 2003-06-13 11:14:36.000000000 +0200
@@ -1324,9 +1324,15 @@
.long sys_stat64 /* 195 */
.long sys_lstat64
.long sys_fstat64
+#ifdef CONFIG_PCI
.long sys_pciconfig_read
.long sys_pciconfig_write
.long sys_pciconfig_iobase /* 200 */
+#else
+ .long sys_ni_syscall
+ .long sys_ni_syscall
+ .long sys_ni_syscall
+#endif
.long sys_ni_syscall /* 201 - reserved - MacOnLinux - new */
.long sys_getdents64
.long sys_pivot_root
--- linuxppc-2.5/arch/ppc/boot/simple/misc-embedded.c 2003-06-12 15:21:49.000000000 +0200
+++ linuxppc-2.5-fefe/arch/ppc/boot/simple/misc-embedded.c 2003-06-13 11:16:37.000000000 +0200
@@ -262,7 +262,9 @@
rec = (struct bi_record *)((unsigned long)rec + rec->size);
}
puts("Now booting the kernel\n");
+#if 0
serial_close(com_port);
+#endif
return (unsigned long)hold_residual;
}
next reply other threads:[~2003-06-13 12:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-13 12:10 Felix von Leitner [this message]
2003-06-13 16:31 ` redwood-5 compile fixes for linuxppc-2.5 Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030613121005.GA1839@codeblau.de \
--to=felix-kernel@fefe.de \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.