From mboxrd@z Thu Jan 1 00:00:00 1970 From: Francesco Poli Subject: Re: Acer Aspire 1300 buggy BIOS - hardcoded patch Date: Tue, 1 Jul 2003 23:43:49 +0200 Sender: cpufreq-admin@www.linux.org.uk Message-ID: <20030701234349.21ccec4f.frx@firenze.linux.it> References: <200306301436.29188.lbelli@crema.unimi.it> <20030701005946.5e659273.frx@firenze.linux.it> <200307010120.19091.lbelli@crema.unimi.it> Reply-To: cpufreq@www.linux.org.uk Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200307010120.19091.lbelli@crema.unimi.it> Errors-To: cpufreq-admin@www.linux.org.uk List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Content-Type: text/plain; charset="us-ascii" To: cpufreq@www.linux.org.uk On Tue, 1 Jul 2003 01:20:18 +0200 Luigi Belli wrote: > On Tuesday 01 July 2003 12:59 am, Francesco Poli wrote: > > > Does anybody know a simple method to check if the BIOS is buggy or > > not? > > Well... simply look at syslog and see if the frequencies are > correct... for my BIOS my cpu has 5 steps: 4 at 500Mhz and 1 at > 600Mhz, all at 1,4V. That's obviously wrong... Here's a /var/log/messages snippet: AMD K7 CPU detected. PowerNOW! Technology present. Can scale: frequency and voltage. Found PSB header at c00e50e0 Table version: 0x12 Flags: 0x0 (Mobile voltage regulator) Settling Time: 100 microseconds. Has 1 PST tables. (Only dumping ones relevant to this CPU). PST:0 (@c00e50f0) cpuid: 0x780^Ifsb: 100^ImaxFID: 0x16^Istartvid: 0xb FID: 0x4 (5.0x [500MHz])^IVID: 0x13 (1.200V) FID: 0x6 (6.0x [600MHz])^IVID: 0x13 (1.200V) FID: 0x8 (7.0x [700MHz])^IVID: 0x13 (1.200V) FID: 0xc (9.0x [900MHz])^IVID: 0x13 (1.200V) FID: 0xe (10.0x [1000MHz])^IVID: 0x11 (1.250V) FID: 0x0 (11.0x [1100MHz])^IVID: 0xe (1.300V) FID: 0x2 (12.0x [1200MHz])^IVID: 0xd (1.350V) FID: 0x16 (14.0x [1400MHz])^IVID: 0xb (1.450V) Minimum speed 500 MHz. Maximum speed 1400 MHz. The values look correct for an AMD Mobile Athlon XP 1600+, don't they? BTW, a patch for the patch. Well, actually, for its comments: you wrote Mhz somewhere and MHz somewhere else. The right symbol is MHz, always! ;-) -- Francesco Poli ====================================================== You're compiling a program and, all of a sudden, boom! -- from APT HOWTO, version 1.8.0