From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ducrot Bruno Subject: Re: Acer Aspire 1300 buggy BIOS - hardcoded patch Date: Fri, 4 Jul 2003 19:04:56 +0200 Sender: cpufreq-admin@www.linux.org.uk Message-ID: <20030704170456.GE7796@poupinou.org> References: <200306301436.29188.lbelli@crema.unimi.it> <20030630151401.GE7796@poupinou.org> <20030701105154.GK7796@poupinou.org> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <20030701105154.GK7796@poupinou.org> Errors-To: cpufreq-admin@www.linux.org.uk List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: cpufreq@www.linux.org.uk Cc: Luigi Belli > Interresting. From ACPI point-of-view, you have those states (I reproduce > only the different frequencies) > > 950 MHz > 750 MHz > 700 MHz > 600 MHz > 500 MHz > > Ahem, seems that not only your PST table is somehow wrong, but it seems > there is nothing to do with ACPI either, sorry. > Ok. Looking a little bit more, I think I can in fact retrieve the exact same configuration (at least FID/VID), minus fsb and settling time (which is 125us instead of 100us) than your override. I am therefore wondering if that is OK to fallback to retrieve at least those FID/VID via ACPI, but (ahem) still the fsb issue though. The 5 states retrieved via _PSS look like this: +---------+-------------------+---------------+------------+--------+ | Freq. | Power compsuption | settling time | control | verif. | |---------+-------------------+---------------+------------+--------| | 950 MHz | 24000 mW | 125 us | 0x009C418D | 0x018D | | 750 MHz | 16337 mW | 125 us | 0x009C41C9 | 0x01C9 | | 700 MHz | 15248 mW | 125 us | 0x009C41C8 | 0x01C8 | | 600 MHz | 12084 mW | 125 us | 0x009C4226 | 0x0226 | | 500 MHz | 9280 mW | 125 us | 0x009C4264 | 0x0264 | +---------+-------------------+---------------+------------+--------+ Therefore, the 'control' stuff look like: bits 0-4: FID bits 5-9: VID other bits: ? rem: I must admit I don't know for what is the other bit-fields. Perhaps some may give real fsb and settling time? which then permit to get those pairs (FID/VID): state 0: FID:0x0d (1263.5 MHz -- 950.0 MHz) / VID:0x0c (1.400) state 1: FID:0x09 (997.5 MHz -- 750.0 MHz) / VID:0x0e (1.300) state 2: FID:0x08 (931.0 MHz -- 700.0 MHz) / VID:0x0e (1.300) state 3: FID:0x06 (798.0 MHz -- 600.0 MHz) / VID:0x11 (1.250) state 4: FID:0x04 (665.0 MHz -- 500.0 MHz) / VID:0x13 (1.200) rem: For the FID, I compute also the theorical freq. if fsb = 133 at first, then if fsb = 100. and well, that look a little better than nothing. Cheers, -- Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care.