All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ruben Puettmann <ruben@puettmann.net>
To: linux-kernel@vger.kernel.org
Subject: Problems with usb-ohci on 2.4.22-preX
Date: Sat, 12 Jul 2003 16:14:31 +0200	[thread overview]
Message-ID: <20030712141431.GA3240@puettmann.net> (raw)


        hy,

i try to install linux on my new motherboard EPOX 8RDA3+ 
with nvidia nforce2 chipset.

If I try to attached some usb devices ( usb memory stick ) I got this
errors ( 2.4.22-pre5 pre2..): 


PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: nVidia Corporation nForce2 USB Controller
ehci_hcd 00:02.2: irq 20, pci mem f88eb000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:02.2 PCI cache line size corrected to 64.
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xf88f3000, IRQ 20
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xf88f5000, IRQ 22
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 15:11:40 Jul 12 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:02.1-3, assigned address 2
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:02.1-3, assigned address 3
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
eth0: Setting 10mbps full-duplex based on auto-negotiated partner ability 4461.
eth0.2: add 01:00:5e:00:00:01 mcast address to master interface
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 292 bytes per conntrack
hub.c: new USB device 00:02.0-3, assigned address 2
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: unable to get device descriptor (error=-12)
hub.c: new USB device 00:02.0-3, assigned address 3
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
hub.c: new USB device 00:02.1-2, assigned address 4
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=4 (error=-110)
hub.c: new USB device 00:02.1-2, assigned address 5
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=5 (error=-110)

This happend's with usb-ohci and usb-ehci loaded or only with usb-ohci.


        thanks for help 

                Ruben


-- 
Ruben Puettmann
ruben@puettmann.net
http://www.puettmann.net

             reply	other threads:[~2003-07-12 14:00 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-07-12 14:14 Ruben Puettmann [this message]
2003-07-13  4:21 ` Problems with usb-ohci on 2.4.22-preX Greg KH
2003-07-13  8:04   ` Ruben Puettmann
2003-07-15 13:47 ` Roger Larsson
2003-07-15 18:34   ` [linux-usb-devel] " David Brownell
2003-07-15 19:22     ` Greg KH
2003-07-15 19:42       ` David Brownell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030712141431.GA3240@puettmann.net \
    --to=ruben@puettmann.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.