From: Carlos O'Donell <carlos@baldric.uwo.ca>
To: parisc-linux@lists.parisc-linux.org
Subject: [parisc-linux] oops with 2.4.20-pa10-UP on rp2430
Date: Mon, 14 Jul 2003 14:53:13 -0400 [thread overview]
Message-ID: <20030714185313.GE14114@systemhalted> (raw)
pa,
In an attempte to get a new rp2430 booting I tried the latest online
kernels without much success.
ftp://ftp.parisc-linux.org/kernels/a500
Booted 2.4.20-UP
Using teh dump-analyzer, but objdump on x86 complains a little about the
architecture... objdump: Can't disassemble for architecture UNKNOWN!,
which I'm assuming means I should probably be using a cross or
multi-arch binutils to do this?
---
IAOQ = 000000001011675c
Func: iosapic_set_irt_data, Off: c, Addr: 0x1011675c
GR0 = 0000000000000000
GR1 = 00000000103d2530
Func: __gp, Off: 1800, Addr: 0x103d2530
GR2 = 00000000101168ac
Func: iosapic_enable_irq, Off: 3c, Addr: 0x101168ac
GR3 = 00000000103d0d30
Func: __gp, Off: 0, Addr: 0x103d0d30
GR4 = 0000000010054db8
GR5 = 00000000103d0d30
Func: __gp, Off: 0, Addr: 0x103d0d30
GR6 = 00000000103c8690
Func: __stop___ksymtab, Off: 14840, Addr: 0x103c8690
GR7 = 00000000102ede58
Func: twist_table___0, Off: 4d0, Addr: 0x102ede58
GR8 = 0000000010452228
Func: IRQ_ports, Off: 428, Addr: 0x10452228
GR9 = 0000000004000000
GR10 = 00000000000243c8
GR11 = 00000000faf00012
GR12 = 000000000000ffff
GR13 = 0000000000013000
GR14 = 0000000000013000
GR15 = 0000000000013000
GR16 = 0000000000005000
GR17 = 0000000000013000
GR18 = 00000000000243c8
GR19 = 0000000000000000
GR20 = 00000000103d7530
Func: __gp, Off: 6800, Addr: 0x103d7530
GR21 = 0000000000000000
GR22 = 0000000010079200
GR23 = 00000000102ede58
Func: twist_table___0, Off: 4d0, Addr: 0x102ede58
GR24 = 0000000017a0d00c
GR25 = 0000000017a0d008
GR26 = 0000000010054db8
GR27 = 00000000103d0d30
Func: __gp, Off: 0, Addr: 0x103d0d30
GR28 = 0000000000000060
GR29 = 0000000017a0d070
GR30 = 0000000017a0d080
GR31 = 0000000000000000
Kernel symbols on the stack:
[<0000000010153e44>]: Func: __alloc_pages, Off: 84, Addr: 0x10153e44
[<000000001010d714>]: Func: enable_irq, Off: 5c, Addr: 0x1010d714
[<000000001010e1e8>]: Func: request_irq, Off: 138, Addr: 0x1010e1e8
[<0000000010154118>]: Func: get_zeroed_page, Off: 58, Addr: 0x10154118
[<00000000101d6b40>]: Func: startup, Off: 580, Addr: 0x101d6b40
[<00000000101d84a4>]: Func: set_serial_info, Off: 404, Addr: 0x101d84a4
[<00000000101d8f84>]: Func: rs_ioctl, Off: 39c, Addr: 0x101d8f84
[<00000000101447d0>]: Func: handle_mm_fault, Off: 148, Addr: 0x101447d0
[<00000000101bdae4>]: Func: tty_ioctl, Off: 2f4, Addr: 0x101bdae4
[<00000000101272a4>]: Func: do_tiocgserial, Off: 44, Addr: 0x101272a4
[<00000000101715f4>]: Func: sys_ioctl, Off: bc, Addr: 0x101715f4
[<0000000010127648>]: Func: sys32_ioctl, Off: 140, Addr: 0x10127648
[<000000001015c150>]: Func: sys_open, Off: c0, Addr: 0x1015c150
[<0000000010171538>]: Func: sys_ioctl, Off: 0, Addr: 0x10171538
[<0000000010108df0>]: Func: syscall_exit, Off: 0, Addr: 0x10108df0
[<000000001010809c>]: Func: intr_restore, Off: 0, Addr: 0x1010809c
[<0000000010108b3c>]: Func: child_return, Off: 0, Addr: 0x10108b3c
[<000000001015bcbc>]: Func: dentry_open, Off: 9c, Addr: 0x1015bcbc
[<0000000010130d64>]: Func: call_console_drivers, Off: ec, Addr: 0x10130d64
Done.
---
Stack Dump:
0000000017a0d080: 000000380804060e 00000000fffffff4 0000000010153e44 0000000000000000
0000000017a0d060: 0000000000000802 00000000106fb6f8 0000000000000001 000000001033a150
0000000017a0d040: 0000000000000000 000000001033a128 00000000103d0d30 0000000000007988
0000000017a0d020: 0000000000000085 00000000103d0d30 0000000000000006 0000000600024a34
0000000017a0d000: 000000001798a080 0000000000000000 000000001010d714 0000000017a0c000
0000000017a0cfe0: 000000000000000f 00000000178e0000 00000000103d0d30 00000000103d0d30
Kernel addresses on the stack:
[<0000000010153e44>] [<000000001010d714>] [<000000001010e1e8>] [<0000000010154118>]
[<00000000101d6b40>] [<00000000101d84a4>] [<00000000101d8f84>] [<00000000101447d0>]
[<00000000101bdae4>] [<00000000101272a4>] [<00000000101715f4>] [<0000000010127648>]
[<000000001015c150>] [<0000000010171538>] [<0000000010108df0>] [<000000001010809c>]
[<0000000010108b3c>] [<000000001015bcbc>] [<0000000010130d64>]
Kernel Fault: Code=26 regs=0000000017a0d080 (Addr=0000000000000003)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001000000011000001110 Not tainted
r00-03 0000000000000000 00000000103d2530 00000000101168ac 00000000103d0d30
r04-07 0000000010054db8 00000000103d0d30 00000000103c8690 00000000102ede58
r08-11 0000000010452228 0000000004000000 00000000000243c8 00000000faf00012
r12-15 000000000000ffff 0000000000013000 0000000000013000 0000000000013000
r16-19 0000000000005000 0000000000013000 00000000000243c8 0000000000000000
r20-23 00000000103d7530 0000000000000000 0000000010079200 00000000102ede58
r24-27 0000000017a0d00c 0000000017a0d008 0000000010054db8 00000000103d0d30
r28-31 0000000000000060 0000000017a0d070 0000000017a0d080 0000000000000000
sr0-3 000000000000b980 000000000000b980 0000000000000000 000000000000b980
sr4-7 0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ: 0000000000000000 0000000000000000 IAOQ: 000000001011675c 0000000010116760
IIR: 0e661014 ISR: 0000000000000000 IOR: 0000000000000003
CPU: 0 CR30: 0000000017a0c000 CR31: 0000000010420000
ORIG_R28: 000000001015384c
next reply other threads:[~2003-07-14 18:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-14 18:53 Carlos O'Donell [this message]
2003-07-14 19:15 ` [parisc-linux] oops with 2.4.20-pa10-UP on rp2430 Carlos O'Donell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030714185313.GE14114@systemhalted \
--to=carlos@baldric.uwo.ca \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.