From mboxrd@z Thu Jan 1 00:00:00 1970 From: azalel@aaahawk.com Subject: kernel message Date: Sun, 20 Jul 2003 22:40:29 -0400 Sender: linux-smp-owner@vger.kernel.org Message-ID: <200307202240.29300.azalel@aaahawk.com> Reply-To: azalel@aaahawk.com Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-smp@vger.kernel.org ESR value before enabling vector: 00000080 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178002 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0002 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 71 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 10 001 01 1 1 0 1 0 1 1 91 11 001 01 1 1 0 1 0 1 1 99 12 001 01 1 1 0 1 0 1 1 A1 13 001 01 1 1 0 1 0 1 1 A9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1807.7077 MHz. ..... host bus clock speed is 267.8084 MHz. cpu: 0, clocks: 2678084, slice: 1339042 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1106/3147] at 00:11.0 PCI->APIC IRQ transform: (B0,I11,P0) -> 19 PCI->APIC IRQ transform: (B0,I13,P0) -> 17 PCI->APIC IRQ transform: (B0,I17,P0) -> 16 PCI->APIC IRQ transform: (B0,I19,P0) -> 18 PCI->APIC IRQ transform: (B0,I20,P0) -> 16 PCI->APIC IRQ transform: (B0,I20,P1) -> 17 PCI->APIC IRQ transform: (B0,I20,P2) -> 18 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI: Via IRQ fixup for 00:14.0, from 11 to 0 PCI: Via IRQ fixup for 00:14.1, from 10 to 1