From: Claas Langbehn <claas@rootdir.de>
To: linux-kernel@vger.kernel.org
Subject: Kernel 2.6.0-test1-ac3: ide-scsi woes
Date: Sun, 27 Jul 2003 11:09:40 +0200 [thread overview]
Message-ID: <20030727090940.GA870@rootdir.de> (raw)
Hello,
i just want to report a possible bug:
Ide-scsi of kernel 2.6.0-test1-ac3 is not working very good.
When burning a cd with cdrdao 1.1.7 there are errors on the
bus (see below). I could not kill -9 cdrdao to get the drive
to be usable again. I had to reboot.
Regards, Claas
--
Jul 26 19:33:25 zoo kernel: hdc: irq timeout: status=0xd8 { Busy }
Jul 26 19:33:25 zoo kernel: hdc: DMA disabled
Jul 26 19:33:25 zoo kernel: ide-scsi: abort called for 10155
Jul 26 19:33:25 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:33:25 zoo kernel: hdc: irq timeout: status=0xd0 { Busy }
Jul 26 19:33:25 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:33:25 zoo kernel: hdc: irq timeout: status=0xd0 { Busy }
Jul 26 19:34:04 zoo kernel: hdc: irq timeout: status=0xd8 { Busy }
Jul 26 19:34:04 zoo kernel: ide-scsi: abort called for 11720
Jul 26 19:34:04 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:34:04 zoo kernel: hdc: irq timeout: status=0xd0 { Busy }
Jul 26 19:34:04 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:34:04 zoo kernel: hdc: irq timeout: status=0xd0 { Busy }
Jul 26 19:34:46 zoo kernel: hdc: irq timeout: status=0xd8 { Busy }
Jul 26 19:34:46 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:34:46 zoo kernel: hdc: irq timeout: status=0xd0 { Busy }
Jul 26 19:34:46 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:34:46 zoo kernel: hdc: irq timeout: status=0xd0 { Busy }
Jul 26 19:34:46 zoo kernel: ide-scsi: abort called for 13561
Jul 26 19:34:46 zoo kernel: ide-scsi: (IO,CoD) != (0,1) while issuing a
packet command
Jul 26 19:34:46 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:38:22 zoo kernel: hdc: irq timeout: status=0xd8 { Busy }
Jul 26 19:38:22 zoo kernel: ide-scsi: abort called for 19633
Jul 26 19:38:22 zoo kernel: Debug: sleeping function called from invalid
context at include/asm/semaphore.h:119
Jul 26 19:38:22 zoo kernel: Call Trace:
Jul 26 19:38:22 zoo kernel: [<c011b11b>] __might_sleep+0x5b/0x80
Jul 26 19:38:22 zoo kernel: [<c02da1a8>] scsi_sleep+0x68/0x90
Jul 26 19:38:22 zoo kernel: [<c02da120>] scsi_sleep_done+0x0/0x20
Jul 26 19:38:22 zoo kernel: [<c02e0768>] idescsi_abort+0xa8/0xb0
Jul 26 19:38:22 zoo kernel: [<c02d9b35>]
scsi_try_to_abort_cmd+0x45/0x50
Jul 26 19:38:22 zoo kernel: [<c02d9c50>] scsi_eh_abort_cmds+0x40/0x80
Jul 26 19:38:22 zoo kernel: [<c02da5c5>] scsi_unjam_host+0x85/0xb0
Jul 26 19:38:22 zoo kernel: [<c02da6a5>] scsi_error_handler+0xb5/0xf0
Jul 26 19:38:22 zoo kernel: [<c02da5f0>] scsi_error_handler+0x0/0xf0
Jul 26 19:38:22 zoo kernel: [<c0107229>] kernel_thread_helper+0x5/0xc
Jul 26 19:38:22 zoo kernel:
Jul 26 19:38:22 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:38:22 zoo kernel: hdc: irq timeout: status=0xd0 { Busy }
Jul 26 19:38:22 zoo kernel: hdc: ATAPI reset complete
Jul 26 19:38:22 zoo kernel: hdc: irq timeout: status=0xd0 { Busy }
Jul 26 19:40:39 zoo kernel: hdc: irq timeout: status=0xd8 { Busy }
Jul 26 19:40:39 zoo kernel: ide-scsi: abort called for 21428
Jul 26 19:40:39 zoo kernel: Debug: sleeping function called from invalid
context at include/asm/semaphore.h:119
Jul 26 19:40:39 zoo kernel: Call Trace:
Jul 26 19:40:39 zoo kernel: [<c011b11b>] __might_sleep+0x5b/0x80
Jul 26 19:40:39 zoo kernel: [<c02da1a8>] scsi_sleep+0x68/0x90
Jul 26 19:40:39 zoo kernel: [<c02da120>] scsi_sleep_done+0x0/0x20
Jul 26 19:40:39 zoo kernel: [<c02e0768>] idescsi_abort+0xa8/0xb0
Jul 26 19:40:39 zoo kernel: [<c02d9b35>]
scsi_try_to_abort_cmd+0x45/0x50
Jul 26 19:40:39 zoo kernel: [<c02d9c50>] scsi_eh_abort_cmds+0x40/0x80
Jul 26 19:40:39 zoo kernel: [<c02da5c5>] scsi_unjam_host+0x85/0xb0
Jul 26 19:40:39 zoo kernel: [<c02da6a5>] scsi_error_handler+0xb5/0xf0
Jul 26 19:40:39 zoo kernel: [<c02da5f0>] scsi_error_handler+0x0/0xf0
Jul 26 19:40:39 zoo kernel: [<c0107229>] kernel_thread_helper+0x5/0xc
Jul 26 19:40:39 zoo kernel:
Jul 26 19:40:47 zoo kernel: ide-scsi: reset called for 21428
Jul 26 19:40:47 zoo kernel: ------------[ cut here ]------------
Jul 26 19:40:47 zoo kernel: kernel BUG at kernel/timer.c:166!
Jul 26 19:40:47 zoo kernel: invalid operand: 0000 [#1]
Jul 26 19:40:47 zoo kernel: CPU: 0
Jul 26 19:40:47 zoo kernel: EIP: 0060:[<c01239bd>] Not tainted
Jul 26 19:40:47 zoo kernel: EFLAGS: 00010002
Jul 26 19:40:47 zoo kernel: EIP is at add_timer+0x5d/0x70
Jul 26 19:40:47 zoo kernel: eax: 00000001 ebx: 00000000 ecx:
c04d5fa0 edx: c04e5b4c
Jul 26 19:40:47 zoo kernel: esi: dfe129e4 edi: c04e5b4c ebp:
dfda9ee0 esp: dfda9ed0
Jul 26 19:40:47 zoo kernel: ds: 007b es: 007b ss: 0068
Jul 26 19:40:47 zoo kernel: Process scsi_eh_0 (pid: 14,
threadinfo=dfda8000 task=dfdf06c0)
Jul 26 19:40:47 zoo kernel: Stack: 00000032 00000000 00000000 00000000
dfda9f10 c02c4e3d dfe129e4 c02c4840
Jul 26 19:40:47 zoo kernel: 00000032 00000000 dfe129c0 c04e5aa0
00000096 00000000 c04e5b4c c04e5b5c
Jul 26 19:40:47 zoo kernel: dfda9f20 c02c4e79 c04e5b4c 00000000
dfda9f40 c02e0833 c04e5b4c 000053b4
Jul 26 19:40:47 zoo kernel: Call Trace:
Jul 26 19:40:47 zoo kernel: [<c02c4e3d>] do_reset1+0x1fd/0x220
Jul 26 19:40:47 zoo kernel: [<c02c4840>] atapi_reset_pollfunc+0x0/0x130
Jul 26 19:40:47 zoo kernel: [<c02c4e79>] ide_do_reset+0x19/0x20
Jul 26 19:40:47 zoo kernel: [<c02e0833>] idescsi_reset+0xc3/0x100
Jul 26 19:40:47 zoo kernel: [<c02d9cd8>]
scsi_try_bus_device_reset+0x48/0x70
Jul 26 19:40:47 zoo kernel: [<c02d9d5e>]
scsi_eh_bus_device_reset+0x5e/0xf0
Jul 26 19:40:47 zoo kernel: [<c02da478>] scsi_eh_ready_devs+0x28/0x70
Jul 26 19:40:47 zoo kernel: [<c02da5df>] scsi_unjam_host+0x9f/0xb0
Jul 26 19:40:47 zoo kernel: [<c02da6a5>] scsi_error_handler+0xb5/0xf0
Jul 26 19:40:47 zoo kernel: [<c02da5f0>] scsi_error_handler+0x0/0xf0
Jul 26 19:40:47 zoo kernel: [<c0107229>] kernel_thread_helper+0x5/0xc
Jul 26 19:40:47 zoo kernel:
Jul 26 19:40:47 zoo kernel: Code: 0f 0b a6 00 80 20 3c c0 eb c1 89 f6 8d
bc 27 00 00 00 00
55
Jul 26 19:41:17 zoo kernel: hdc: ATAPI reset timed-out, status=0x88
Jul 26 19:41:47 zoo kernel: ide1: reset timed-out, status=0x88
Jul 26 19:48:54 zoo modprobe: FATAL: Module /dev/:0 not found.
Jul 26 19:48:54 zoo shutdown[918]: shutting down for system reboot
# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host
Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b198
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97
Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 74)
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device
0322 (rev a1)
# lspci -v (IDE only)
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device 1695:3005
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at dc00 [size=16]
Capabilities: [c0] Power Management version 2
# cat /proc/ide/hdc/model
LITE-ON LTR-12101B
# cat /proc/ide/via
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.37
South Bridge: VIA vt8235
Revision: ISA 0x0 IDE 0x6
Highest DMA rate: UDMA133
BM-DMA base: 0xdc00
PCI clock: 33.3MHz
Master Read Cycle IRDY: 0ws
Master Write Cycle IRDY: 0ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes yes
Post Write Buffer: yes yes
Enabled: yes yes
Simplex only: no no
Cable Type: 80w 80w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA PIO DMA PIO
Address Setup: 120ns 120ns 120ns 120ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 330ns 90ns 330ns
Data Recovery: 30ns 270ns 30ns 270ns
Cycle Time: 22ns 600ns 120ns 600ns
Transfer Rate: 88.8MB/s 3.3MB/s 16.6MB/s 3.3MB/s
I can attach my kernel .config, too if neccessary.
reply other threads:[~2003-07-27 8:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030727090940.GA870@rootdir.de \
--to=claas@rootdir.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.