All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephan von Krawczynski <skraw@ithnet.com>
To: Marcelo Tosatti <marcelo@conectiva.com.br>
Cc: andrea@suse.de, linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: 2.4.22-pre lockups (decoded oops for pre8)
Date: Sat, 2 Aug 2003 14:27:34 +0200	[thread overview]
Message-ID: <20030802142734.5df93471.skraw@ithnet.com> (raw)
In-Reply-To: <Pine.LNX.4.55L.0307251545090.14733@freak.distro.conectiva>

Hello Marcelo, hello andrea,

after some days of running 2.4.22-pre8 I finally got the crash (freeze as
usual). This time the debuggin setup worked and I got:


ksymoops 2.4.8 on i686 2.4.22-pre8.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.22-pre8/ (default)
     -m /boot/System.map-2.4.22-pre8 (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Unable to handle kernel paging request at virtual address 4129b0fc
c0130084
*pde = 313f6067
Oops: 0002
CPU:    1
EIP:    0010:[<c0130084>]    Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000   ebx: c2cfdba0   ecx: 00000000   edx: 4129b0fc
esi: d5fb0a24   edi: 0001ca22   ebp: c02eaaa8   esp: c345df30
ds: 0018   es: 0018   ss: 0018
Process kswapd (pid: 5, stackpage=c345d000)
Stack: c2cfdba0 d5fb0a24 c2cfdba0 c013924f c2cfdba0 000001d0 00000200 000001d0 
       00000006 00000020 000001d0 00000020 00000006 c0139493 00000006 00000001 
       c02eaaa8 000001d0 00000006 c02eaaa8 00000000 c013950e 00000020 c02eaaa8 
Call Trace:    [<c013924f>] [<c0139493>] [<c013950e>] [<c013961c>] [<c01396a8>]
  [<c01397d8>] [<c0139740>] [<c0105000>] [<c010592e>] [<c0139740>]
Code: 89 02 c7 43 24 00 00 00 00 f0 ff 0d 9c a5 37 c0 5a 5b 5e c3 


>>EIP; c0130084 <__remove_inode_page+44/60>   <=====

>>ebx; c2cfdba0 <_end+2952980/3852ee40>
>>esi; d5fb0a24 <_end+15c05804/3852ee40>
>>ebp; c02eaaa8 <contig_page_data+168/340>
>>esp; c345df30 <_end+30b2d10/3852ee40>

Trace; c013924f <shrink_cache+2df/3b0>
Trace; c0139493 <shrink_caches+63/a0>
Trace; c013950e <try_to_free_pages_zone+3e/60>
Trace; c013961c <kswapd_balance_pgdat+4c/b0>
Trace; c01396a8 <kswapd_balance+28/40>
Trace; c01397d8 <kswapd+98/c0>
Trace; c0139740 <kswapd+0/c0>
Trace; c0105000 <_stext+0/0>
Trace; c010592e <arch_kernel_thread+2e/40>
Trace; c0139740 <kswapd+0/c0>

Code;  c0130084 <__remove_inode_page+44/60>
00000000 <_EIP>:
Code;  c0130084 <__remove_inode_page+44/60>   <=====
   0:   89 02                     mov    %eax,(%edx)   <=====
Code;  c0130086 <__remove_inode_page+46/60>
   2:   c7 43 24 00 00 00 00      movl   $0x0,0x24(%ebx)
Code;  c013008d <__remove_inode_page+4d/60>
   9:   f0 ff 0d 9c a5 37 c0      lock decl 0xc037a59c
Code;  c0130094 <__remove_inode_page+54/60>
  10:   5a                        pop    %edx
Code;  c0130095 <__remove_inode_page+55/60>
  11:   5b                        pop    %ebx
Code;  c0130096 <__remove_inode_page+56/60>
  12:   5e                        pop    %esi
Code;  c0130097 <__remove_inode_page+57/60>
  13:   c3                        ret    


1 warning issued.  Results may not be reliable.


Hope this helps.
Anything further I can do?

Regards,
Stephan


       reply	other threads:[~2003-08-02 12:27 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Pine.LNX.4.55L.0307251040240.12645@freak.distro.conectiva>
     [not found] ` <20030725174517.5b21116d.skraw@ithnet.com>
     [not found]   ` <Pine.LNX.4.55L.0307251545090.14733@freak.distro.conectiva>
2003-08-02 12:27     ` Stephan von Krawczynski [this message]
2003-08-03  7:25       ` 2.4.22-pre lockups (decoded oops for pre8) Willy Tarreau
2003-08-03  9:40         ` Stephan von Krawczynski
2003-08-05 16:40       ` Marcelo Tosatti
2003-08-06  2:37         ` Stephan von Krawczynski
2003-08-06  7:41         ` 2.4.22-pre lockups (now decoded oops for pre10) Stephan von Krawczynski
2003-08-06  8:58           ` Oleg Drokin
2003-08-06  9:09           ` Willy Tarreau
2003-08-06  9:36             ` Stephan von Krawczynski
2003-08-06 12:45               ` Willy Tarreau
2003-08-18 14:23             ` Andrea Arcangeli
2003-08-06 18:15           ` Marcelo Tosatti
2003-08-07  2:14             ` Stephan von Krawczynski
2003-08-07  5:35               ` Oleg Drokin
2003-08-07 12:45               ` Marcelo Tosatti
     [not found]                 ` <3F325198.2010301@namesys.com>
2003-08-07 13:32                   ` Stephan von Krawczynski
2003-08-18 20:29                     ` Mike Fedyk
2003-08-18 20:39                       ` Stephan von Krawczynski
2003-08-18 21:05                         ` [grammar] " Matt Gibson
2003-08-18 21:09                         ` Mike Fedyk
2003-08-07 15:52                 ` Stephan von Krawczynski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030802142734.5df93471.skraw@ithnet.com \
    --to=skraw@ithnet.com \
    --cc=andrea@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcelo@conectiva.com.br \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.