All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Buesch <fsdeveloper@yahoo.de>
To: insecure@mail.od.ua
Cc: linux kernel mailing list <linux-kernel@vger.kernel.org>,
	linux-ide@vger.kernel.org
Subject: Re: [2.6] system is very slow during disk access
Date: Wed, 6 Aug 2003 22:47:14 +0200	[thread overview]
Message-ID: <200308062247.17816.fsdeveloper@yahoo.de> (raw)
In-Reply-To: <200308062331.08020.insecure@mail.od.ua>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wednesday 06 August 2003 22:31, insecure wrote:
> hdparm -T -t output? dmesg? lspci? /proc/ide stuff?


root@lfs:/home/mb> hdparm -T -t /dev/hda

/dev/hda:
 Timing buffer-cache reads:   128 MB in  0.37 seconds =343.22 MB/sec
 Timing buffered disk reads:  64 MB in  1.53 seconds = 41.81 MB/sec


dmesg doesn't show any unusual messages.


root@lfs:/home/mb> lspci 
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 05)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti4400] (rev a2)
03:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
03:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
03:03.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
03:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
03:0c.0 USB Controller: NEC Corporation USB (rev 41)
03:0c.1 USB Controller: NEC Corporation USB (rev 41)
03:0c.2 USB Controller: NEC Corporation USB 2.0 (rev 02)

root@lfs:/home/mb> cat /proc/ide/drivers 
ide-cdrom version 4.59-ac1
ide-disk version 1.18

root@lfs:/home/mb> cat /proc/ide/hda/settings 
name                    value           min             max             mode
- ----                    -----           ---             ---             ----
acoustic                0               0               254             rw
address                 0               0               2               rw
bios_cyl                79780           0               65535           rw
bios_head               16              0               255             rw
bios_sect               63              0               63              rw
bswap                   0               0               1               r
current_speed           69              0               70              rw
failures                0               0               65535           rw
init_speed              69              0               70              rw
io_32bit                1               0               3               rw
keepsettings            0               0               1               rw
lun                     0               0               7               rw
max_failures            1               0               65535           rw
multcount               16              0               16              rw
nice1                   1               0               1               rw
nowerr                  0               0               1               rw
number                  0               0               3               rw
pio_mode                write-only      0               255             w
slow                    0               0               1               rw
unmaskirq               0               0               1               rw
using_dma               1               0               1               rw
wcache                  0               0               1               rw


root@lfs:/home/mb> cat /proc/ide/hda/model 
IC35L040AVVA07-0


> --
> insecure

- -- 
Regards Michael Buesch  [ http://www.8ung.at/tuxsoft ]
Penguin on this machine:  Linux 2.6.0-test2 - i386

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE/MWlSoxoigfggmSgRAjXOAJ9zyjWGS7G30ScpX+qff+xCY0AEzACfRVvQ
42uPwSsmoPv5hte149jD398=
=XNT2
-----END PGP SIGNATURE-----

  parent reply	other threads:[~2003-08-06 20:47 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-08-06 18:51 [2.6] system is very slow during disk access Michael Buesch
2003-08-06 19:29 ` Frank Van Damme
2003-08-06 19:31   ` Michael Buesch
2003-08-06 22:19     ` Willy Gardiol
2003-08-06 22:27       ` Michael Buesch
2003-08-06 19:29 ` Michael Buesch
2003-08-06 22:04   ` Andrew Morton
2003-08-06 22:44     ` Michael Buesch
2003-08-06 22:56       ` Andrew Morton
2003-08-06 23:10         ` Michael Buesch
2003-08-06 23:01       ` Bartlomiej Zolnierkiewicz
2003-08-06 23:01         ` Bartlomiej Zolnierkiewicz
2003-08-06 23:16         ` Michael Buesch
2003-08-06 23:16           ` Michael Buesch
2003-08-06 23:30           ` Bartlomiej Zolnierkiewicz
2003-08-06 23:30             ` Bartlomiej Zolnierkiewicz
2003-08-07 10:12             ` Michael Buesch
     [not found] ` <200308062331.08020.insecure@mail.od.ua>
2003-08-06 20:47   ` Michael Buesch [this message]
2003-08-07  4:13     ` Nuno Silva
2003-08-07  9:53       ` Michael Buesch
  -- strict thread matches above, loose matches on Subject: below --
2003-08-07  5:45 Jean-Yves LENHOF

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200308062247.17816.fsdeveloper@yahoo.de \
    --to=fsdeveloper@yahoo.de \
    --cc=insecure@mail.od.ua \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.